Hacktoberfest 2026 : les issues que les mainteneurs ont marquées pour octobre, ouvertes et accessibles aux débutants. Parcourir les issues Hacktoberfest

Limrun Android: `fill` inserts at the cursor instead of replacing the field's text

Fermée
  • Quelque chose ne va pas ?
#3,358 0 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Les mainteneurs répondent en général sous 1 jour

Une pull request liée a déjà été fusionnée.

  • #3362 par @thymikee — fusionnée

Évaluation

Difficulté
3/5
Temps estimé
1-2 jours
Accessibilité débutants
62/100
Type d'issue
Bug
Clarté
Clairement spécifiée
Activité
Active
Stack technique
android, typescript
Domaine
mobile

Piste de recherche

Start in the Android fill path where agent-device returns after the provider-native provider.text call, since that call skips the adb clear, verify and retry steps (KEYCODE_MOVE_END and KEYCODE_DEL). The Limrun instance client's setText and pressKey calls are the relevant entry points. Done means fill on a field with existing text leaves exactly the new value, and a mismatch is reported rather than passing silently. Reproduce with the Settings search field commands in the issue.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

Summary

On a Limrun Android instance, fill does not replace the existing contents of a text field. The new text is inserted wherever the tap leaves the cursor, so filling a field that already has a value produces a concatenation of the old and new text. The help text says fill <target> <text> replaces, and that is what happens on local emulators.

Environment

  • agent-device: 0.21.15, and the same code path is present in 0.21.24 (latest at the time of writing)
  • Provider: Limrun, Android instance (agent-device connect limrun --platform android)
  • Keyboard on the instance: com.android.inputmethod.latin (the agent-device test IME is not active)
  • App: the system Settings app (any EditText reproduces it)

Steps to reproduce

agent-device connect limrun --platform android --run-id fill-repro --session repro
agent-device open settings --platform android --session repro
agent-device snapshot -i --platform android --session repro   # find "Search Settings"
agent-device click @e2 --platform android --session repro      # opens the search field
agent-device fill @e7 "[email protected]" --platform android --session repro
agent-device fill @e7 "[email protected]" --platform android --session repro
agent-device snapshot -i --platform android --session repro

Expected

After the second fill, the field contains:

[email protected]

Actual

The second fill taps the field center, which puts the cursor inside the existing value, and inserts the text there:

[email protected][email protected]

Both fill calls exit successfully. A caller that does not re-read the field carries on with the wrong value.

Cause

On Android, fill first checks whether the device provider supplies its own text entry. Limrun does (provider.text → the Limrun instance client's setText({ x, y }, text)), so agent-device returns after that call. It never reaches the Android path that clears the field (KEYCODE_MOVE_END + KEYCODE_DEL), verifies the result and retries, or uses the test IME.

Calling the Limrun Android instance client directly on the same instance shows that setText never replaces:

Call Result
setText({ x, y }, text) (what agent-device sends) inserted at the cursor
setText({ selector: { focused: true } }, text) inserted at the cursor
setText(undefined, text) inserted at the cursor
setText({ selector: { focused: true } }, '') rejected: text is required

So with the provider-native path there is currently no way to clear the field before typing.

Workaround that worked

Selecting all and deleting with hardware key events before setText, through the same Limrun instance client:

await client.pressKey('a', ['ctrl']);
await client.pressKey('del');
await client.setText(undefined, text);

This left the field holding exactly the requested text in 3 of 3 runs. The select and delete took about 350 ms together; setText took about 1 s.

Suggested fix

For a Limrun Android fill, clear the focused field before the provider-native setText (for example with the Ctrl+A / Delete key events above), then run the existing verification so a mismatch is reported instead of passing silently. Alternatively, route Limrun Android fill through the existing adb clear/verify/retry path or the test IME.

Possibly related (not reproduced)

In one run, a fill into a field that had just taken focus from another field lost its first character (jane… arrived as ane…). I could not reproduce it on a single field in 4 attempts, so it is mentioned only in case it shares the cause.

Langage dominant
TypeScript
Étoiles
5.2k
Forks
359
Merge moyen
12 h 43 min
PR mergées (30 j)
666

Préparer son environnement

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de callstack/agent-device

Toutes les issues de callstack/agent-device

Issues similaires

Plus d'issues TypeScript

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.