Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

m5stack StackChan (based on CoreS3) doesn't boot/no CIRCUITPY drive

未关闭
#11,009 21 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
35/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
冷清
技术栈
c
领域
embedded-iot

调研方向

Start by reviewing the CoreS3 board support and the supplied USB serial boot log, which stops after “Disabling RNG early entropy source...”. Compare behavior when flashing the CoreS3 directly and while attached to the StackChan base. Done means the board boots CircuitPython and exposes a CIRCUITPY drive; the issue does not identify a file or test.

由索引模型根据 Issue 内容生成。

描述

board bug esp32-s3
CircuitPython version and board name
Adafruit CircuitPython 10.2.1; m5stack StackChan
Code/REPL
tio /dev/tty.usbmodem2101
Behavior
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)
Saved PC:0x4038085e
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x17f8
load:0x403c8700,len:0x4
load:0x403c8704,len:0xfa8
load:0x403cb700,len:0x30c0
entry 0x403c8974
I (26) boot: ESP-IDF v5.3.2 2nd stage bootloader
I (26) boot: compile time Jul  3 2025 10:56:32
I (26) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (33) boot: efuse block revision: v1.3
I (38) qio_mode: Enabling default flash chip QIO
I (43) boot.esp32s3: Boot SPI Speed : 80MHz
I (48) boot.esp32s3: SPI Mode       : QIO
I (52) boot.esp32s3: SPI Flash Size : 16MB
I (57) boot: Enabling RNG early entropy source...
I (63) boot: Partition Table:
I (66) boot: ## Label            Usage          Type ST Offset   Length
I (74) boot:  0 nvs              WiFi data        01 02 00009000 00005000
I (81) boot:  1 otadata          OTA data         01 00 0000e000 00002000
I (88) boot:  2 ota_0            OTA app          00 10 00010000 00200000
I (96) boot:  3 ota_1            OTA app          00 11 00210000 00200000
I (103) boot:  4 uf2              factory app      00 00 00410000 00040000
I (111) boot:  5 ffat             Unknown data     01 81 00450000 00bb0000
I (119) boot: End of partition table
I (123) boot: Reset Reason = 12
I (127) boot: Reset hint = 0
I (130) esp_image: segment 0: paddr=00010020 vaddr=3c150020 size=4c57ch (312700) map
I (185) esp_image: segment 1: paddr=0005c5a4 vaddr=3fca0800 size=03a74h ( 14964) load
I (188) esp_image: segment 2: paddr=00060020 vaddr=42000020 size=14721ch (1339932) map
I (391) esp_image: segment 3: paddr=001a7244 vaddr=3fca4274 size=015f4h (  5620) load
I (393) esp_image: segment 4: paddr=001a8840 vaddr=40374000 size=1c6f4h (116468) load
I (419) esp_image: segment 5: paddr=001c4f3c vaddr=50001fd0 size=00020h (    32) load
I (419) esp_image: segment 6: paddr=001c4f64 vaddr=600fe000 size=01060h (  4192) load
I (437) boot: Loaded app from partition at offset 0x10000
I (437) boot: Disabling RNG early entropy source...
Description

The m5stack StackChan is based on the m5stack CoreS3, with an added servo base with some peripherals.
I'm attempting to flash CircuitPython for the CoreS3 on it.

After using the "Open installer" workflow from the CircuitPython page, no CIRCUITPY drive ever appears, and the boot log over USB serial ends at I (437) boot: Disabling RNG early entropy source... (full log in "Behavior").
The backlight remains on while the unit is plugged in.
I've tried removing the CoreS3 unit from the StackChan base and flashing that way, same result.
Same result flashing the bootloader with esptool as well.

Additional information

Flashing on an M1 Max MBP on Tahoe 26.3.1

主要语言
C
星标
4.6k
派生
1.4k
平均合并
1 天 8 小时
30 天内合并 PR
155

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

adafruit/circuitpython 的其他 Issue

查看 adafruit/circuitpython 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。