Hacktoberfest 2026:メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

m5stack StackChan (based on CoreS3) doesn't boot/no CIRCUITPY drive

オープン
#11,009 コメント 21 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
35/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
静か
技術スタック
c
領域
embedded-iot

調査の方向性

Start by reviewing the CoreS3 board support and the supplied USB serial boot log, which stops after “Disabling RNG early entropy source...”. Compare behavior when flashing the CoreS3 directly and while attached to the StackChan base. Done means the board boots CircuitPython and exposes a CIRCUITPY drive; the issue does not identify a file or test.

索引モデルが issue の本文から書いたものです。

説明

board bug esp32-s3
CircuitPython version and board name
Adafruit CircuitPython 10.2.1; m5stack StackChan
Code/REPL
tio /dev/tty.usbmodem2101
Behavior
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)
Saved PC:0x4038085e
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x17f8
load:0x403c8700,len:0x4
load:0x403c8704,len:0xfa8
load:0x403cb700,len:0x30c0
entry 0x403c8974
I (26) boot: ESP-IDF v5.3.2 2nd stage bootloader
I (26) boot: compile time Jul  3 2025 10:56:32
I (26) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (33) boot: efuse block revision: v1.3
I (38) qio_mode: Enabling default flash chip QIO
I (43) boot.esp32s3: Boot SPI Speed : 80MHz
I (48) boot.esp32s3: SPI Mode       : QIO
I (52) boot.esp32s3: SPI Flash Size : 16MB
I (57) boot: Enabling RNG early entropy source...
I (63) boot: Partition Table:
I (66) boot: ## Label            Usage          Type ST Offset   Length
I (74) boot:  0 nvs              WiFi data        01 02 00009000 00005000
I (81) boot:  1 otadata          OTA data         01 00 0000e000 00002000
I (88) boot:  2 ota_0            OTA app          00 10 00010000 00200000
I (96) boot:  3 ota_1            OTA app          00 11 00210000 00200000
I (103) boot:  4 uf2              factory app      00 00 00410000 00040000
I (111) boot:  5 ffat             Unknown data     01 81 00450000 00bb0000
I (119) boot: End of partition table
I (123) boot: Reset Reason = 12
I (127) boot: Reset hint = 0
I (130) esp_image: segment 0: paddr=00010020 vaddr=3c150020 size=4c57ch (312700) map
I (185) esp_image: segment 1: paddr=0005c5a4 vaddr=3fca0800 size=03a74h ( 14964) load
I (188) esp_image: segment 2: paddr=00060020 vaddr=42000020 size=14721ch (1339932) map
I (391) esp_image: segment 3: paddr=001a7244 vaddr=3fca4274 size=015f4h (  5620) load
I (393) esp_image: segment 4: paddr=001a8840 vaddr=40374000 size=1c6f4h (116468) load
I (419) esp_image: segment 5: paddr=001c4f3c vaddr=50001fd0 size=00020h (    32) load
I (419) esp_image: segment 6: paddr=001c4f64 vaddr=600fe000 size=01060h (  4192) load
I (437) boot: Loaded app from partition at offset 0x10000
I (437) boot: Disabling RNG early entropy source...
Description

The m5stack StackChan is based on the m5stack CoreS3, with an added servo base with some peripherals.
I'm attempting to flash CircuitPython for the CoreS3 on it.

After using the "Open installer" workflow from the CircuitPython page, no CIRCUITPY drive ever appears, and the boot log over USB serial ends at I (437) boot: Disabling RNG early entropy source... (full log in "Behavior").
The backlight remains on while the unit is plugged in.
I've tried removing the CoreS3 unit from the StackChan base and flashing that way, same result.
Same result flashing the bootloader with esptool as well.

Additional information

Flashing on an M1 Max MBP on Tahoe 26.3.1

主要言語
C
スター
4.6k
フォーク
1.4k
平均マージ
1日 8時間
マージ済み PR(30日)
153

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

adafruit/circuitpython のほかの issue

adafruit/circuitpython の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。