Map and merge Art-Net input into sACN output

未关闭
#2,009 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
5/5
预计耗时
一周以上
新手友好度
25/100
Issue 类型
文档
描述清晰度
需要澄清
活跃度
停滞
技术栈
cpp

调研方向

Start with the ola-e131.conf and ola-artnet.conf settings, then compare the enumerated input and output ports with the Art-Net and sACN traffic observed in Wireshark. Determine whether OLA supports this routing and merging arrangement, and document the required configuration or the limitation clearly.

由索引模型根据 Issue 内容生成。

描述

It seems like OLA has the ability to merge data. But I couldn't find concrete information on how exactly it works and how to achieve that.

My concrete use-case is the following:
Software ! is using an OLA server to output data fed via RPC through either Art-Net or sACN. I want to take the data of software B on the same device which outputs either Art-Net or sACN and merge it with the data of software A.

A ->  (RPC)  -> OLA -> sACN -> Network
B -> (Art-Net) -^

The relevant OLA configuration is the following
ola-e131.conf:

revision = 0.46
enabled = true
input_ports = 5
dscp = 0
output_ports = 32
prepend_hostname = true
draft_discovery = false
ignore_preview = false
ip = en0
cid = 0F3B39DB-3EB8-4591-871D-31B3B07729C8

ola-artnet.conf:

subnet = 0
always_broadcast = false
enabled = true
use_loopback = false
output_ports = 4
long_name = Lightkey Art-Net Node on Noir
short_name = Lightkey Art-Net
use_limited_broadcast = false
net = 0
ip = en0

If I enumerate through the OLA ports and devices I get the following:

Device 1: ArtNet [192.168.1.42]
Input ports:
  port 0, ArtNet Universe 0:0:1, RDM supported
  port 1, ArtNet Universe 0:0:2, RDM supported
  port 2, , RDM supported
  port 3, , RDM supported
Output ports:
  port 0, , RDM supported
  port 1, , RDM supported
  port 2, , RDM supported
  port 3, , RDM supported
[...snip...]
Device 4: E1.31 (DMX over ACN) [192.168.142]
Input ports:
  port 0, 
  port 1, 
  port 2, 
  port 3, 
  port 4, 
Output ports:
  port 0, E1.31 Universe 3
  port 1, E1.31 Universe 4
  port 2, E1.31 Universe 5
  port 3, E1.31 Universe 6
  port 4,
[...snip...]

I monitor with Wireshark what both softwares are sending. I also see the data of software B in the monitoring feature of software A.
But the output of software A in Wireshark doesn't reflect the data of software B.

What am I missing? Is this even possible?

主要语言
C++
星标
773
派生
233
PR 合并指标
30 天内没有已合并 PR

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

OpenLightingProject/ola 的其他 Issue

查看 OpenLightingProject/ola 的全部 Issue

相似的 Issue

更多 C++ Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。