Map and merge Art-Net input into sACN output

Abierto
#2,009 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
5/5
Tiempo estimado
Más de una semana
Aptitud para principiantes
25/100
Tipo de issue
Documentación
Claridad
Necesita aclaración
Estado de actividad
Estancado
Stack tecnológico
cpp

Línea de trabajo

Start with the ola-e131.conf and ola-artnet.conf settings, then compare the enumerated input and output ports with the Art-Net and sACN traffic observed in Wireshark. Determine whether OLA supports this routing and merging arrangement, and document the required configuration or the limitation clearly.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

It seems like OLA has the ability to merge data. But I couldn't find concrete information on how exactly it works and how to achieve that.

My concrete use-case is the following:
Software ! is using an OLA server to output data fed via RPC through either Art-Net or sACN. I want to take the data of software B on the same device which outputs either Art-Net or sACN and merge it with the data of software A.

A ->  (RPC)  -> OLA -> sACN -> Network
B -> (Art-Net) -^

The relevant OLA configuration is the following
ola-e131.conf:

revision = 0.46
enabled = true
input_ports = 5
dscp = 0
output_ports = 32
prepend_hostname = true
draft_discovery = false
ignore_preview = false
ip = en0
cid = 0F3B39DB-3EB8-4591-871D-31B3B07729C8

ola-artnet.conf:

subnet = 0
always_broadcast = false
enabled = true
use_loopback = false
output_ports = 4
long_name = Lightkey Art-Net Node on Noir
short_name = Lightkey Art-Net
use_limited_broadcast = false
net = 0
ip = en0

If I enumerate through the OLA ports and devices I get the following:

Device 1: ArtNet [192.168.1.42]
Input ports:
  port 0, ArtNet Universe 0:0:1, RDM supported
  port 1, ArtNet Universe 0:0:2, RDM supported
  port 2, , RDM supported
  port 3, , RDM supported
Output ports:
  port 0, , RDM supported
  port 1, , RDM supported
  port 2, , RDM supported
  port 3, , RDM supported
[...snip...]
Device 4: E1.31 (DMX over ACN) [192.168.142]
Input ports:
  port 0, 
  port 1, 
  port 2, 
  port 3, 
  port 4, 
Output ports:
  port 0, E1.31 Universe 3
  port 1, E1.31 Universe 4
  port 2, E1.31 Universe 5
  port 3, E1.31 Universe 6
  port 4,
[...snip...]

I monitor with Wireshark what both softwares are sending. I also see the data of software B in the monitoring feature of software A.
But the output of software A in Wireshark doesn't reflect the data of software B.

What am I missing? Is this even possible?

Lenguaje dominante
C++
Estrellas
771
Forks
234
Métricas de merge de PR
Sin PR fusionados en 30 d

Preparar el entorno

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de OpenLightingProject/ola

Todos los issues de OpenLightingProject/ola

Issues similares

Más issues de C++

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.