Map and merge Art-Net input into sACN output

Đang mở
#2,009 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
5/5
Thời gian dự kiến
Hơn một tuần
Mức phù hợp với người mới
25/100
Loại issue
Tài liệu
Độ rõ ràng
Cần làm rõ
Mức độ hoạt động
Đình trệ
Công nghệ
cpp
Lĩnh vực
documentation, networking

Hướng nghiên cứu

Start with the ola-e131.conf and ola-artnet.conf settings, then compare the enumerated input and output ports with the Art-Net and sACN traffic observed in Wireshark. Determine whether OLA supports this routing and merging arrangement, and document the required configuration or the limitation clearly.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

It seems like OLA has the ability to merge data. But I couldn't find concrete information on how exactly it works and how to achieve that.

My concrete use-case is the following:
Software ! is using an OLA server to output data fed via RPC through either Art-Net or sACN. I want to take the data of software B on the same device which outputs either Art-Net or sACN and merge it with the data of software A.

A ->  (RPC)  -> OLA -> sACN -> Network
B -> (Art-Net) -^

The relevant OLA configuration is the following
ola-e131.conf:

revision = 0.46
enabled = true
input_ports = 5
dscp = 0
output_ports = 32
prepend_hostname = true
draft_discovery = false
ignore_preview = false
ip = en0
cid = 0F3B39DB-3EB8-4591-871D-31B3B07729C8

ola-artnet.conf:

subnet = 0
always_broadcast = false
enabled = true
use_loopback = false
output_ports = 4
long_name = Lightkey Art-Net Node on Noir
short_name = Lightkey Art-Net
use_limited_broadcast = false
net = 0
ip = en0

If I enumerate through the OLA ports and devices I get the following:

Device 1: ArtNet [192.168.1.42]
Input ports:
  port 0, ArtNet Universe 0:0:1, RDM supported
  port 1, ArtNet Universe 0:0:2, RDM supported
  port 2, , RDM supported
  port 3, , RDM supported
Output ports:
  port 0, , RDM supported
  port 1, , RDM supported
  port 2, , RDM supported
  port 3, , RDM supported
[...snip...]
Device 4: E1.31 (DMX over ACN) [192.168.142]
Input ports:
  port 0, 
  port 1, 
  port 2, 
  port 3, 
  port 4, 
Output ports:
  port 0, E1.31 Universe 3
  port 1, E1.31 Universe 4
  port 2, E1.31 Universe 5
  port 3, E1.31 Universe 6
  port 4,
[...snip...]

I monitor with Wireshark what both softwares are sending. I also see the data of software B in the monitoring feature of software A.
But the output of software A in Wireshark doesn't reflect the data of software B.

What am I missing? Is this even possible?

Ngôn ngữ chính
C++
Star
773
Fork
233
Chỉ số merge pull request
Không có pull request nào được merge trong 30 ngày

Chuẩn bị môi trường

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của OpenLightingProject/ola

Tất cả issue của OpenLightingProject/ola

Issue tương tự

Thêm issue về C++

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.