Draft robot dead-ends on a blank lake: 'Run flashpoint ingest first' with no command or path
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 2/5
- 预计耗时
- 半天
- 新手友好度
- 45/100
- Issue 类型
- 缺陷
- 描述清晰度
- 基本清楚
- 活跃度
- 活跃
- 技术栈
- cli, python
调研方向
Start from the empty-state text 'No imported logs yet. Run flashpoint ingest first.' in the Draft robot setup view, and from the 'Robot for <season>' check message, then run flashpoint serve on a blank lake to reproduce. Done means both messages show a copy-ready flashpoint ingest --lake <this lake> <folder> command with a one-line explanation, a link to the guide, and a 'refresh after import' hint, and the season check offers 'Draft one from a log'. Leave the open question about a UI import action for the maintainers to decide.
由索引模型根据 Issue 内容生成。
描述
Found walking through setup on a blank lake and blank config (flashpoint serve on main at 8369dff).
What happens
Setup › Draft robot is the fast path for a new team (#24), but on a blank lake it says only:
No imported logs yet. Run flashpoint ingest first.
There's no hint of what to pass to ingest, which folder or files it wants, or which lake and config it will use. A student who has never used the CLI is stuck. The Robot for 2026 check has the same problem: it says "add a robot file to …/robots", while the easier route is Draft robot.
Expected (small fix, keeps imports on the CLI)
- The empty state gives the exact command for this server's lake and config, ready to copy:
flashpoint ingest --lake <this lake> <folder with a match's .wpilog and .hoot files>, with one line on what the folder is (a match's logs from the robot USB stick,acquire, or a Drive download), plus a link to the guide. - It says when to come back: refresh after the import finishes.
- The Robot for check offers "Draft one from a log" (a link to the tab) next to "add a robot file".
Open question (challenges an earlier decision)
#24 lists "editing lake data from the UI" as a non-goal, and #19 and #23 keep re-import on the CLI. A guarded Import a folder fix action (ADR-0017 style, local only, read-only when shared) would remove the only CLI step in first-time setup. Worth deciding on purpose rather than by default.
- 主要语言
- Python
- 星标
- 0
- 派生
- 1
- 平均合并
- 18 小时 37 分钟
- 30 天内合并 PR
- 15
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南，环境需要你自己搭建：先看它的 README，通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
IgniteRobotics/flashpoint 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 70/100
IgniteRobotics/flashpoint#45 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 74/100
IgniteRobotics/flashpoint#44 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 82/100
IgniteRobotics/flashpoint#43 ·
维护者通常 1 天内回复
-
bug good first issue
难度 1/5 1 小时以内 新手友好度 85/100
IgniteRobotics/flashpoint#12 ·
维护者通常 1 天内回复
-
tools/update-owlet-manifest.py ignores --help and starts downloading可能重新可做 @yoveneim 于 11 天前认领，目前没有进行中的 PR。 未关闭bug good first issue
难度 2/5 1-3 小时 新手友好度 83/100
IgniteRobotics/flashpoint#11 · 1 条评论 ·
维护者通常 1 天内回复
查看 IgniteRobotics/flashpoint 的全部 Issue
相似的 Issue
-
New Internship未关闭new_internship
难度 2/5 1-3 小时 新手友好度 68/100
-
get_graph warns that the oneway column is missing when no way has a oneway tag可能已有人在做 @HTenkanen 今天认领。 未关闭
难度 2/5 1-3 小时 新手友好度 75/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 78/100
维护者通常 1 天内回复
-
fix: security 🔐 style: article/section 📝 system: data-mgmt 🗃️ system: security 🔐 system: software 💻
难度 2/5 1-3 小时 新手友好度 65/100
uabrc/uabrc.github.io#1267 ·
-
Bot Type: Bug Type: Documentation
难度 2/5 1-3 小时 新手友好度 70/100
维护者通常 1 天内回复