Remove Euler cluster instructions from docs
维护者通常 3 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 3/5
- 预计耗时
- 半天
- 新手友好度
- 49/100
- Issue 类型
- 文档
- 描述清晰度
- 基本清楚
- 活跃度
- 冷清
- 技术栈
- jupyter, python
调研方向
Start with the developer guide page Guide_Euler.html and compare its Euler installation instructions with the linked climada-on-euler instructions and the notes in this issue. The issue asks whether to update the guide and raises an unresolved question about loading R for Jupyter, so first confirm the intended approach with maintainers. Done means the guide has approved, current instructions and the Jupyter setup notes are addressed.
由索引模型根据 Issue 内容生成。
描述
I realized that the informations to install CLIMADA on Euler in the developer guide (https://climada-python.readthedocs.io/en/latest/development/Guide_Euler.html) are no longer up-to-date. I have followed the instructions from https://gitlab.ethz.ch/climada/climada-on-euler, (posted on slack) and it worked. I have gathered a few issues I encountered during the install + added some notes below. @carmensteinmann I think you also had some issues with CLIMADA on Euler recently, so in case you have other tips or issues that you want to share feel free to add them here. @emanuel-schmid would you like me to update the developer's guide with this new set of instructions or is this still work in progress?
Install CLIMADA for a specific branch
- Follow instructions to install climada 6.1 (https://gitlab.ethz.ch/climada/climada-on-euler)
- Checkout target climada or climada_petals branch
- Activate virtual environment using source ./use-climada.sh [ENVDIR] [VERSION]
- pip install -e path/to/climada_python/or/climada_petals
Compatibility
- The approach described in https://gitlab.ethz.ch/climada/climada-on-euler works for CLIMADA 6. It has not been tested for previous versions. It might work for 5 but is unlikely to work for versions anterior to 5.
Use CLIMADA in a jupyter notebook
- The set-up of the jupyter server was failing due to some missing R command (
/cluster/software/others/services/jupyterhub/scripts/jupyterlab.sh: line 21: R: command not found) but addingr/4.3.2 \to thescripts/load-climada-modules.shfixed the issue:
#!/bin/bash
module purge
module load \
gcc/12.2.0 \
stack/2024-06 \
python/3.11.6 \
hdf5/1.14.3 \
geos/3.9.1 \
sqlite/3.43.2 \
eccodes/2.25.0 \
gdal/3.6.3 \
r/4.3.2 \
eth_proxy
@emanuel-schmid is there a reason why this was not there in the first place and will this cause issues?
- 主要语言
- Jupyter Notebook
- 星标
- 478
- 派生
- 166
- 平均合并
- 2 天 31 分钟
- 30 天内合并 PR
- 4
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
CLIMADA-project/climada_python 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 72/100
CLIMADA-project/climada_python#1337 ·
维护者通常 3 天内回复
-
bug
难度 2/5 1-3 小时 新手友好度 85/100
CLIMADA-project/climada_python#1336 ·
维护者通常 3 天内回复
-
CartoDB basemaps now need an API key (somewhat urgent)可能已有人在做 关联的 PR 仍在进行中或已合并。 未关闭bug
难度 2/5 1-3 小时 新手友好度 72/100
CLIMADA-project/climada_python#1332 · 4 条评论 · 1 个 reaction ·
维护者通常 3 天内回复
-
warnings
难度 2/5 1-3 小时 新手友好度 65/100
CLIMADA-project/climada_python#1241 ·
维护者通常 3 天内回复
-
ResourceWarning未关闭warnings
难度 2/5 1-3 小时 新手友好度 62/100
CLIMADA-project/climada_python#1239 ·
维护者通常 3 天内回复
查看 CLIMADA-project/climada_python 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 62/100
theforeman/foreman-documentation#5529 ·
维护者通常 2 天内回复
-
难度 1/5 1-3 小时 新手友好度 88/100
fossasia/visdom-dev#69 ·
维护者通常 3 天内回复
-
难度 1/5 1 小时以内 新手友好度 74/100
-
sync-en
难度 2/5 1-3 小时 新手友好度 78/100
维护者通常 1 天内回复
-
sync-en
难度 2/5 1-3 小时 新手友好度 72/100
维护者通常 2 天内回复