0.17.0: pep517 based build fails
未關閉
還沒有人認領這個 Issue。
評估
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 新手友好度
- 25/100
- Issue 類型
- 缺陷
- 描述清晰度
- 需要釐清
- 活躍度
- 停滯
- 技術堆疊
- python
- 領域
- build-system
研究方向
在離線環境中重現回報的 python3 -sBm build -w --no-isolation 工作流程，然後檢查 MANIFEST.in 中提到的封裝輸入以及 uvloop/loop.pyx 的建置路徑。將 wheel 安裝和 pytest 結果與預期的 PEP517 週期進行比較；當 wheel 在沒有網路存取的情況下完成建置與安裝，且測試通過時，即表示完成。
由索引模型根據 Issue 內容生成。
描述
I'm packaging your module as an rpm package so I'm using the typical PEP517 based build, install and test cycle used on building packages from non-root account.
python3 -sBm build -w --no-isolation- because I'm calling
buildwith--no-isolationI'm using during all processes only locally installed modules - install .whl file in </install/prefix> using 'installer` module
- run pytest with $PYTHONPATH pointing to sitearch and sitelib inside </install/prefix>
- build is performed in env which is
cut off from access to the public network(pytest is executed with-m "not network")
Here is pytest output:
+ cd uvloop-0.17.0
+ ASMFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none'
+ CFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none'
+ CXXFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none'
+ FFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -I/usr/lib64/gfortran/modules'
+ FCFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -I/usr/lib64/gfortran/modules'
+ LDFLAGS='-Wl,--gc-sections -Wl,--as-needed -flto=auto -flto-partition=none -fuse-linker-plugin -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,--build-id=sha1'
+ RUSTFLAGS='-C codegen-units=1 -C debuginfo=2 -C opt-level=2 -C link-arg=-fdata-sections -C link-arg=-ffunction-sections -C link-arg=-Wl,--as-needed -C link-arg=-Wl,-z,now -C link-arg=-Wl,-z,relro --cap-lints=warn'
+ VALAFLAGS=-g
+ CC=/usr/bin/gcc
+ CXX=/usr/bin/g++
+ FC=/usr/bin/gfortran
+ AR=/usr/bin/gcc-ar
+ NM=/usr/bin/gcc-nm
+ RANLIB=/usr/bin/gcc-ranlib
+ export ASMFLAGS CFLAGS CXXFLAGS FFLAGS FCFLAGS LDFLAGS VALAFLAGS CC CXX FC AR NM RANLIB RUSTFLAGS VALAFLAGS
+ PBR_VERSION=0.17.0
+ PDM_PEP517_SCM_VERSION=0.17.0
+ PDM_BUILD_SCM_VERSION=0.17.0
+ SETUPTOOLS_SCM_PRETEND_VERSION=0.17.0
+ /usr/bin/python3 -sBm build -w --no-isolation
* Getting build dependencies for wheel...
* Building wheel...
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-38
creating build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/__init__.py -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/_noop.py -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/_testbase.py -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/_version.py -> build/lib.linux-x86_64-cpython-38/uvloop
running egg_info
creating uvloop.egg-info
writing uvloop.egg-info/PKG-INFO
writing dependency_links to uvloop.egg-info/dependency_links.txt
writing requirements to uvloop.egg-info/requires.txt
writing top-level names to uvloop.egg-info/top_level.txt
writing manifest file 'uvloop.egg-info/SOURCES.txt'
Compiling uvloop/loop.pyx because it changed.
[1/1] Cythonizing uvloop/loop.pyx
reading manifest file 'uvloop.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
<string>:144: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
warning: no files found matching '*' under directory 'vendor/libuv'
warning: no previously-included files matching '*' found under directory 'vendor/libuv/.git'
warning: no previously-included files matching '*' found under directory 'vendor/libuv/docs'
warning: no previously-included files matching '*' found under directory 'vendor/libuv/img'
adding license file 'LICENSE-APACHE'
adding license file 'LICENSE-MIT'
writing manifest file 'uvloop.egg-info/SOURCES.txt'
copying uvloop/cbhandles.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/cbhandles.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/dns.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/errors.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.c -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.pyi -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/lru.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/pseudosock.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/py.typed -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/request.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/request.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/server.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/server.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/sslproto.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/sslproto.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
creating build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/async_.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/async_.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/basetransport.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/basetransport.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/check.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/check.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/fsevent.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/fsevent.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/handle.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/handle.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/idle.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/idle.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/pipe.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/pipe.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/poll.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/poll.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/process.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/process.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/stream.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/stream.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/streamserver.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/streamserver.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/tcp.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/tcp.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/timer.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/timer.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/udp.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/udp.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
creating build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/__init__.py -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/compat.h -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/consts.pxi -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/debug.h -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/debug.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/flowcontrol.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/fork_handler.h -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/python.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/stdlib.pxi -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/system.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/uv.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
running build_ext
building 'uvloop.loop' extension
creating build/temp.linux-x86_64-cpython-38
creating build/temp.linux-x86_64-cpython-38/uvloop
/usr/bin/gcc -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -D_GNU_SOURCE -fPIC -fwrapv -ffat-lto-objects -fno-semantic-interposition -D_GNU_SOURCE -fPIC -fwrapv -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -D_GNU_SOURCE -fPIC -fwrapv -ffat-lto-objects -fno-semantic-interposition -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -D_GNU_SOURCE -fPIC -fwrapv -ffat-lto-objects -fno-semantic-interposition -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -fPIC -I/usr/include/python3.8 -c uvloop/loop.c -o build/temp.linux-x86_64-cpython-38/uvloop/loop.o ""
gcc: warning: : linker input file unused because linking not done
gcc: error: : linker input file not found: No such file or directory
/usr/lib/python3.8/site-packages/setuptools/command/build_py.py:201: _Warning: Package 'uvloop.handles' is absent from the `packages` configuration.
!!
********************************************************************************
############################
# Package would be ignored #
############################
Python recognizes 'uvloop.handles' as an importable package[^1],
but it is absent from setuptools' `packages` configuration.
This leads to an ambiguous overall configuration. If you want to distribute this
package, please make sure that 'uvloop.handles' is explicitly added
to the `packages` configuration field.
Alternatively, you can also rely on setuptools' discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
If you don't want 'uvloop.handles' to be distributed and are
already explicitly excluding 'uvloop.handles' via
`find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
you can try to use `exclude_package_data`, or `include-package-data=False` in
combination with a more fine grained `package-data` configuration.
You can read more about "package data files" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/datafiles.html
[^1]: For Python, any directory (with suitable naming) can be imported,
even if it does not contain any `.py` files.
On the other hand, currently there is no concept of package data
directory, all directories are treated like packages.
********************************************************************************
!!
check.warn(importable)
/usr/lib/python3.8/site-packages/setuptools/command/build_py.py:201: _Warning: Package 'uvloop.includes' is absent from the `packages` configuration.
!!
********************************************************************************
############################
# Package would be ignored #
############################
Python recognizes 'uvloop.includes' as an importable package[^1],
but it is absent from setuptools' `packages` configuration.
This leads to an ambiguous overall configuration. If you want to distribute this
package, please make sure that 'uvloop.includes' is explicitly added
to the `packages` configuration field.
Alternatively, you can also rely on setuptools' discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
If you don't want 'uvloop.includes' to be distributed and are
already explicitly excluding 'uvloop.includes' via
`find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
you can try to use `exclude_package_data`, or `include-package-data=False` in
combination with a more fine grained `package-data` configuration.
You can read more about "package data files" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/datafiles.html
[^1]: For Python, any directory (with suitable naming) can be imported,
even if it does not contain any `.py` files.
On the other hand, currently there is no concept of package data
directory, all directories are treated like packages.
********************************************************************************
!!
check.warn(importable)
error: command '/usr/bin/gcc' failed with exit code 1
ERROR Backend subprocess exited when trying to invoke build_wheel
Here is list of installed modules in build env
Package Version
----------------------------- -------
aiohttp 3.8.4
aiosignal 1.3.1
alabaster 0.7.13
asttokens 2.2.1
async-timeout 4.0.2
attrs 23.1.0
Babel 2.12.1
backcall 0.2.0
build 0.10.0
cffi 1.15.1
charset-normalizer 3.1.0
cryptography 40.0.2
Cython 0.29.35
decorator 5.1.1
distro 1.8.0
docutils 0.19
exceptiongroup 1.1.1
executing 1.2.0
frozenlist 1.3.3
gpg 1.20.0
idna 3.4
imagesize 1.4.1
importlib-metadata 6.7.0
iniconfig 2.0.0
installer 0.7.0
ipython 8.12.0
jedi 0.18.2
Jinja2 3.1.2
libcomps 0.1.19
MarkupSafe 2.1.2
matplotlib-inline 0.1.6
multidict 6.0.4
packaging 23.1
parso 0.8.3
pexpect 4.8.0
pickleshare 0.7.5
pluggy 1.0.0
ply 3.11
prompt-toolkit 3.0.38
psutil 5.9.2
ptyprocess 0.7.0
pure-eval 0.2.2
pycparser 2.21
Pygments 2.15.1
pyOpenSSL 23.1.1
pyproject_hooks 1.0.0
pytest 7.4.0
python-dateutil 2.8.2
pytz 2023.2
requests 2.31.0
setuptools 68.0.0
setuptools-scm 7.1.0
six 1.16.0
snowballstemmer 2.2.0
Sphinx 6.2.1
sphinxcontrib-applehelp 1.0.4
sphinxcontrib-devhelp 1.0.2
sphinxcontrib-htmlhelp 2.0.0
sphinxcontrib-jsmath 1.0.1
sphinxcontrib-qthelp 1.0.3
sphinxcontrib-serializinghtml 1.1.5
stack-data 0.6.2
tomli 2.0.1
traitlets 5.9.0
typing_extensions 4.6.3
urllib3 1.26.15
wcwidth 0.2.6
wheel 0.40.0
yarl 1.9.2
zipp 3.15.0
- 主要語言
- Cython
- 星號
- 11.9k
- 分支
- 615
- 平均合併
- 4 小時 43 分鐘
- 30 天內合併 PR
- 3
環境準備
這個專案沒有提供開發容器、Dockerfile 或貢獻指南，環境需要你自己搭建：先看它的 README，通用步驟見我們的新手貢獻指南。
從這裡開始
- 先讀完整個 Issue，再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫，在一個分支上完成修改。
- 送出 Pull Request，並在描述裡引用這個 Issue 編號。
MagicStack/uvloop 的其他 Issue
-
uv 1.53.0 fix可能已有人在做 @fantix 於 4 天前認領。 未關閉
難度 1/5 1 小時以內 新手友好度 85/100
MagicStack/uvloop#774 · 1 則留言 · 1 個 reaction ·
-
難度 2/5 1-3 小時 新手友好度 68/100
MagicStack/uvloop#759 ·
-
難度 2/5 1-3 小時 新手友好度 68/100
MagicStack/uvloop#741 · 2 個 reaction ·
-
`asyncio.get_event_loop` raises error instead of spawning new loop when no loop is running.可能已有人在做 關聯的 PR 仍在進行中或已合併。 未關閉
難度 2/5 1-3 小時 新手友好度 68/100
MagicStack/uvloop#702 · 8 則留言 · 9 個 reaction ·
-
難度 5/5 一週以上 新手友好度 25/100
MagicStack/uvloop#773 ·
查看 MagicStack/uvloop 的全部 Issue
相似的 Issue
-
enhancement
難度 2/5 1 小時以內 新手友好度 72/100
afarber/OpenMapView#22 ·
-
難度 2/5 1-3 小時 新手友好度 65/100
rescript-lang/rescript#8765 ·
維護者通常 1 天內回覆
-
upstream update
難度 2/5 1-3 小時 新手友好度 65/100
conan-io/conan-center-index#31142 ·
維護者通常 1 天內回覆
-
bot-found documentation priority: P3
難度 2/5 1-3 小時 新手友好度 72/100
madenvel/KalinkaPlayer#313 ·
-
難度 2/5 1-3 小時 新手友好度 62/100
維護者通常 1 天內回覆