0.17.0: pep517 based build fails
Đang mở
Chưa có ai nhận issue này.
Đánh giá
- Độ khó
- 4/5
- Thời gian dự kiến
- 3-5 ngày
- Mức phù hợp với người mới
- 25/100
- Loại issue
- Lỗi
- Độ rõ ràng
- Cần làm rõ
- Mức độ hoạt động
- Đình trệ
- Công nghệ
- python
- Lĩnh vực
- build-system
Hướng nghiên cứu
Tái hiện workflow python3 -sBm build -w --no-isolation đã được báo cáo trong môi trường ngoại tuyến, sau đó kiểm tra các đầu vào đóng gói được đề cập trong MANIFEST.in và đường dẫn build của uvloop/loop.pyx. So sánh việc cài đặt wheel và kết quả pytest với chu kỳ PEP517 dự kiến; được xem là hoàn tất khi wheel được build, cài đặt và các bài kiểm thử đều vượt qua mà không cần truy cập mạng.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
I'm packaging your module as an rpm package so I'm using the typical PEP517 based build, install and test cycle used on building packages from non-root account.
python3 -sBm build -w --no-isolation- because I'm calling
buildwith--no-isolationI'm using during all processes only locally installed modules - install .whl file in </install/prefix> using 'installer` module
- run pytest with $PYTHONPATH pointing to sitearch and sitelib inside </install/prefix>
- build is performed in env which is
cut off from access to the public network(pytest is executed with-m "not network")
Here is pytest output:
+ cd uvloop-0.17.0
+ ASMFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none'
+ CFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none'
+ CXXFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none'
+ FFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -I/usr/lib64/gfortran/modules'
+ FCFLAGS='-O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -I/usr/lib64/gfortran/modules'
+ LDFLAGS='-Wl,--gc-sections -Wl,--as-needed -flto=auto -flto-partition=none -fuse-linker-plugin -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,--build-id=sha1'
+ RUSTFLAGS='-C codegen-units=1 -C debuginfo=2 -C opt-level=2 -C link-arg=-fdata-sections -C link-arg=-ffunction-sections -C link-arg=-Wl,--as-needed -C link-arg=-Wl,-z,now -C link-arg=-Wl,-z,relro --cap-lints=warn'
+ VALAFLAGS=-g
+ CC=/usr/bin/gcc
+ CXX=/usr/bin/g++
+ FC=/usr/bin/gfortran
+ AR=/usr/bin/gcc-ar
+ NM=/usr/bin/gcc-nm
+ RANLIB=/usr/bin/gcc-ranlib
+ export ASMFLAGS CFLAGS CXXFLAGS FFLAGS FCFLAGS LDFLAGS VALAFLAGS CC CXX FC AR NM RANLIB RUSTFLAGS VALAFLAGS
+ PBR_VERSION=0.17.0
+ PDM_PEP517_SCM_VERSION=0.17.0
+ PDM_BUILD_SCM_VERSION=0.17.0
+ SETUPTOOLS_SCM_PRETEND_VERSION=0.17.0
+ /usr/bin/python3 -sBm build -w --no-isolation
* Getting build dependencies for wheel...
* Building wheel...
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-38
creating build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/__init__.py -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/_noop.py -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/_testbase.py -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/_version.py -> build/lib.linux-x86_64-cpython-38/uvloop
running egg_info
creating uvloop.egg-info
writing uvloop.egg-info/PKG-INFO
writing dependency_links to uvloop.egg-info/dependency_links.txt
writing requirements to uvloop.egg-info/requires.txt
writing top-level names to uvloop.egg-info/top_level.txt
writing manifest file 'uvloop.egg-info/SOURCES.txt'
Compiling uvloop/loop.pyx because it changed.
[1/1] Cythonizing uvloop/loop.pyx
reading manifest file 'uvloop.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
<string>:144: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
warning: no files found matching '*' under directory 'vendor/libuv'
warning: no previously-included files matching '*' found under directory 'vendor/libuv/.git'
warning: no previously-included files matching '*' found under directory 'vendor/libuv/docs'
warning: no previously-included files matching '*' found under directory 'vendor/libuv/img'
adding license file 'LICENSE-APACHE'
adding license file 'LICENSE-MIT'
writing manifest file 'uvloop.egg-info/SOURCES.txt'
copying uvloop/cbhandles.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/cbhandles.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/dns.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/errors.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.c -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.pyi -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/loop.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/lru.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/pseudosock.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/py.typed -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/request.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/request.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/server.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/server.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/sslproto.pxd -> build/lib.linux-x86_64-cpython-38/uvloop
copying uvloop/sslproto.pyx -> build/lib.linux-x86_64-cpython-38/uvloop
creating build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/async_.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/async_.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/basetransport.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/basetransport.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/check.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/check.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/fsevent.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/fsevent.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/handle.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/handle.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/idle.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/idle.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/pipe.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/pipe.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/poll.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/poll.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/process.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/process.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/stream.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/stream.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/streamserver.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/streamserver.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/tcp.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/tcp.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/timer.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/timer.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/udp.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/handles
copying uvloop/handles/udp.pyx -> build/lib.linux-x86_64-cpython-38/uvloop/handles
creating build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/__init__.py -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/compat.h -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/consts.pxi -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/debug.h -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/debug.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/flowcontrol.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/fork_handler.h -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/python.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/stdlib.pxi -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/system.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
copying uvloop/includes/uv.pxd -> build/lib.linux-x86_64-cpython-38/uvloop/includes
running build_ext
building 'uvloop.loop' extension
creating build/temp.linux-x86_64-cpython-38
creating build/temp.linux-x86_64-cpython-38/uvloop
/usr/bin/gcc -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -D_GNU_SOURCE -fPIC -fwrapv -ffat-lto-objects -fno-semantic-interposition -D_GNU_SOURCE -fPIC -fwrapv -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -D_GNU_SOURCE -fPIC -fwrapv -ffat-lto-objects -fno-semantic-interposition -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -D_GNU_SOURCE -fPIC -fwrapv -ffat-lto-objects -fno-semantic-interposition -O2 -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fdata-sections -ffunction-sections -flto=auto -flto-partition=none -fPIC -I/usr/include/python3.8 -c uvloop/loop.c -o build/temp.linux-x86_64-cpython-38/uvloop/loop.o ""
gcc: warning: : linker input file unused because linking not done
gcc: error: : linker input file not found: No such file or directory
/usr/lib/python3.8/site-packages/setuptools/command/build_py.py:201: _Warning: Package 'uvloop.handles' is absent from the `packages` configuration.
!!
********************************************************************************
############################
# Package would be ignored #
############################
Python recognizes 'uvloop.handles' as an importable package[^1],
but it is absent from setuptools' `packages` configuration.
This leads to an ambiguous overall configuration. If you want to distribute this
package, please make sure that 'uvloop.handles' is explicitly added
to the `packages` configuration field.
Alternatively, you can also rely on setuptools' discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
If you don't want 'uvloop.handles' to be distributed and are
already explicitly excluding 'uvloop.handles' via
`find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
you can try to use `exclude_package_data`, or `include-package-data=False` in
combination with a more fine grained `package-data` configuration.
You can read more about "package data files" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/datafiles.html
[^1]: For Python, any directory (with suitable naming) can be imported,
even if it does not contain any `.py` files.
On the other hand, currently there is no concept of package data
directory, all directories are treated like packages.
********************************************************************************
!!
check.warn(importable)
/usr/lib/python3.8/site-packages/setuptools/command/build_py.py:201: _Warning: Package 'uvloop.includes' is absent from the `packages` configuration.
!!
********************************************************************************
############################
# Package would be ignored #
############################
Python recognizes 'uvloop.includes' as an importable package[^1],
but it is absent from setuptools' `packages` configuration.
This leads to an ambiguous overall configuration. If you want to distribute this
package, please make sure that 'uvloop.includes' is explicitly added
to the `packages` configuration field.
Alternatively, you can also rely on setuptools' discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
If you don't want 'uvloop.includes' to be distributed and are
already explicitly excluding 'uvloop.includes' via
`find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
you can try to use `exclude_package_data`, or `include-package-data=False` in
combination with a more fine grained `package-data` configuration.
You can read more about "package data files" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/datafiles.html
[^1]: For Python, any directory (with suitable naming) can be imported,
even if it does not contain any `.py` files.
On the other hand, currently there is no concept of package data
directory, all directories are treated like packages.
********************************************************************************
!!
check.warn(importable)
error: command '/usr/bin/gcc' failed with exit code 1
ERROR Backend subprocess exited when trying to invoke build_wheel
Here is list of installed modules in build env
Package Version
----------------------------- -------
aiohttp 3.8.4
aiosignal 1.3.1
alabaster 0.7.13
asttokens 2.2.1
async-timeout 4.0.2
attrs 23.1.0
Babel 2.12.1
backcall 0.2.0
build 0.10.0
cffi 1.15.1
charset-normalizer 3.1.0
cryptography 40.0.2
Cython 0.29.35
decorator 5.1.1
distro 1.8.0
docutils 0.19
exceptiongroup 1.1.1
executing 1.2.0
frozenlist 1.3.3
gpg 1.20.0
idna 3.4
imagesize 1.4.1
importlib-metadata 6.7.0
iniconfig 2.0.0
installer 0.7.0
ipython 8.12.0
jedi 0.18.2
Jinja2 3.1.2
libcomps 0.1.19
MarkupSafe 2.1.2
matplotlib-inline 0.1.6
multidict 6.0.4
packaging 23.1
parso 0.8.3
pexpect 4.8.0
pickleshare 0.7.5
pluggy 1.0.0
ply 3.11
prompt-toolkit 3.0.38
psutil 5.9.2
ptyprocess 0.7.0
pure-eval 0.2.2
pycparser 2.21
Pygments 2.15.1
pyOpenSSL 23.1.1
pyproject_hooks 1.0.0
pytest 7.4.0
python-dateutil 2.8.2
pytz 2023.2
requests 2.31.0
setuptools 68.0.0
setuptools-scm 7.1.0
six 1.16.0
snowballstemmer 2.2.0
Sphinx 6.2.1
sphinxcontrib-applehelp 1.0.4
sphinxcontrib-devhelp 1.0.2
sphinxcontrib-htmlhelp 2.0.0
sphinxcontrib-jsmath 1.0.1
sphinxcontrib-qthelp 1.0.3
sphinxcontrib-serializinghtml 1.1.5
stack-data 0.6.2
tomli 2.0.1
traitlets 5.9.0
typing_extensions 4.6.3
urllib3 1.26.15
wcwidth 0.2.6
wheel 0.40.0
yarl 1.9.2
zipp 3.15.0
- Ngôn ngữ chính
- Cython
- Star
- 11.9k
- Fork
- 615
- Chỉ số merge pull request
- Không có pull request nào được merge trong 30 ngày
Hướng dẫn đóng góp
Chưa lập chỉ mục được hướng dẫn đóng góp cho kho mã nguồn này
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của MagicStack/uvloop
-
License not clear Đang mở
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
MagicStack/uvloop#759 ·
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
MagicStack/uvloop#741 · 2 reaction ·
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
MagicStack/uvloop#702 · 8 bình luận · 9 reaction ·
-
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 25/100
MagicStack/uvloop#766 ·
-
Directly constructed subprocess pipe protocols segfault when callbacks use a non-process owner Đang mở
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 52/100
MagicStack/uvloop#765 ·
Tất cả issue của MagicStack/uvloop
Issue tương tự
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 75/100
elastic/gradle-plugins#157 ·
-
Documentation
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 75/100
cake-build/cake#5024 ·
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 75/100
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 88/100
web-infra-dev/rspack#15847 ·
-
accepted bug wg/developer-experience-ecosystem
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 88/100
vllm-project/semantic-router#4062 · 2 bình luận ·