Hacktoberfest 2026: những issue maintainer đã đánh dấu cho tháng Mười, đang mở và phù hợp người mới. Xem issue Hacktoberfest

Thread reboots leak static TLS when OPcache is loaded but disabled (opcache.enable=0): extensions stop loading

Đang mở
  • Có gì không ổn?
#2,730 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 1 ngày

Chưa có ai nhận issue này.

Đánh giá

Độ khó
4/5
Thời gian dự kiến
3-5 ngày
Mức phù hợp với người mới
45/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
docker, go, linux, php
Lĩnh vực
backend, infrastructure

Hướng nghiên cứu

Start by tracing rebootAllThreads() and frankenphp_new_main_thread, then compare PHP module startup and shutdown when OPcache is disabled versus enabled. The report provides a Docker reproduction using intl and worker restarts; reproduce the static TLS allocation failure and verify whether the change prevents extensions from disappearing after repeated reboots.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

What happened?

Prepared with an AI assistant (Claude), which ran the investigation and the reproduction below on my machine; I asked for this report.

With OPcache loaded but disabled (opcache.enable=0), every reboot of FrankenPHP's PHP threads (a worker restart through the admin API, or a file change with watch) leaks static TLS. After enough reboots, extensions can no longer be loaded at the next PHP startup:

PHP Warning:  PHP Startup: Unable to load dynamic library 'intl' (tried: …/intl (…: cannot open shared object file: No such file or directory), …/no-debug-zts-20240924/intl.so (…/intl.so: cannot allocate memory in static TLS block)) in Unknown on line 0

From then on the extension is missing in every request until the process is restarted (Class "Locale" not found, …). In our app (about 30 extensions, watch in development) this happened after about 95 saved files; with imagick the victim was libgomp.so.1: cannot allocate memory in static TLS block.

Minimal reproduction (official image, only intl)

Dockerfile:

FROM dunglas/frankenphp:1.13.1-php8.4-trixie
RUN install-php-extensions intl

Caddyfile:

{
	frankenphp {
		worker /app/public/worker.php 2
		php_ini opcache.enable 0
	}
}

:80 {
	root * /app/public
	php_server
}

public/worker.php:

<?php
while (frankenphp_handle_request(static function (): void {
    echo 'worker';
})) {
    gc_collect_cycles();
}

public/check.php:

<?php
echo extension_loaded('intl') ? 'intl loaded' : 'intl MISSING';

docker build -t fp-tls .
docker run -d --name fp-tls -v "$PWD/Caddyfile:/etc/frankenphp/Caddyfile:ro" -v "$PWD/public:/app/public:ro" fp-tls
for i in $(seq 1 1000); do
  docker exec fp-tls curl -s -X POST localhost:2019/frankenphp/workers/restart >/dev/null
  docker logs fp-tls 2>&1 | grep -q 'static TLS' && break
done
echo "after $i restarts: $(docker exec fp-tls curl -s localhost/check.php)"

Results (x86_64):

Setup Result
php_ini opcache.enable 0 (OPcache loaded, disabled) intl fails to load after 215 restarts
OPcache enabled (the same without the php_ini line) no failure in 1000 restarts
OPcache not loaded (rm /usr/local/etc/php/conf.d/docker-php-ext-opcache.ini) no failure in 600 restarts
Our app's image, ~30 extensions, opcache.enable 0 fails after 95 restarts
The same, without the php_ini opcache.enable 0 line no failure in 150 restarts
Likely cause

When OPcache is enabled, accel_startup() sets extension->handle = 0 ("Prevent unloading", ext/opcache/ZendAccelerator.c), so opcache.so stays loaded. When it is disabled, accel_startup() returns before that, so opcache.so is unloaded at module shutdown and loaded again by the php_module_startup() that rebootAllThreads() runs (frankenphp_new_main_thread). It looks like glibc does not give back the static TLS of the unloaded ZTS module, so every reboot takes more of the surplus until another extension no longer fits. This is our reading of the source and the measurements; we have not traced glibc's allocator.

Why opcache.enable=0, and workarounds

We disabled OPcache because of the OPcache races under ZTS (php-src GH-8739, #23637, #24319; see also #2714, #2715): in worker mode, restarting workers under load crashed the process with zend_mm_heap corrupted about once in 20 to 50 restarts on PHP 8.4.26.

What worked for us:

  • Not loading OPcache instead of disabling it (what we use now).
  • Raising glibc's reserve with GLIBC_TUNABLES=glibc.rtld.optional_static_tls=1048576: 400 reboots without failure. Note that glibc ignores GLIBC_TUNABLES for the image's /usr/local/bin/frankenphp, because its cap_net_bind_service file capability puts it in secure-execution mode. A copy of the binary without the capability honoured it.

Perhaps worth a note in the docs (disable OPcache by not loading it, not with opcache.enable=0). Alternatively, keep extensions loaded across a thread reboot, as an enabled OPcache does for itself. You know the trade-offs there better than we do.

Build Type

Docker (Debian Trixie)

Worker Mode

Yes

Operating System

GNU/Linux

CPU Architecture

x86_64

PHP configuration
phpinfo() output 
FrankenPHP v1.13.1 PHP 8.4.26 Caddy v2.11.7 (dunglas/frankenphp:1.13.1-php8.4-trixie)
Thread Safety => enabled
glibc 2.41 (Debian 13), host kernel Linux 7.2 x86_64, Docker
Extensions: the image's defaults + intl (installed with install-php-extensions)
php_ini opcache.enable 0
Relevant log output
Relevant log output 
(after many "rebooting all PHP threads" / "workers restarted from admin api")
{"level":"warn","ts":1792408364.6600497,"logger":"frankenphp","msg":"PHP Warning:  PHP Startup: Unable to load dynamic library 'intl' (tried: /usr/local/lib/php/extensions/no-debug-zts-20240924/intl (/usr/local/lib/php/extensions/no-debug-zts-20240924/intl: cannot open shared object file: No such file or directory), /usr/local/lib/php/extensions/no-debug-zts-20240924/intl.so (/usr/local/lib/php/extensions/no-debug-zts-20240924/intl.so: cannot allocate memory in static TLS block)) in Unknown on line 0","syslog_level":"warning"}
Ngôn ngữ chính
Go
Star
11.4k
Fork
499
Merge trung bình
2 ngày 9 giờ
Pull request đã merge (30 ngày)
40

Chuẩn bị môi trường

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của php/frankenphp

Tất cả issue của php/frankenphp

Issue tương tự

Thêm issue về Go

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.