Hacktoberfest 2026: le issue che i maintainer hanno segnato per ottobre, aperte e adatte ai principianti. Sfoglia le issue Hacktoberfest

Thread reboots leak static TLS when OPcache is loaded but disabled (opcache.enable=0): extensions stop loading

Aperta
  • Qualcosa non va?
#2,730 0 commenti 0 reazioni 0 assegnatari Vedi su GitHub

I maintainer di solito rispondono entro 1 giorno

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
45/100
Tipo di issue
Bug
Chiarezza
Abbastanza chiara
Stato di attività
Attiva
Stack tecnologico
docker, go, linux, php
Ambito
backend, infrastructure

Direzione di ricerca

Start by tracing rebootAllThreads() and frankenphp_new_main_thread, then compare PHP module startup and shutdown when OPcache is disabled versus enabled. The report provides a Docker reproduction using intl and worker restarts; reproduce the static TLS allocation failure and verify whether the change prevents extensions from disappearing after repeated reboots.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

What happened?

Prepared with an AI assistant (Claude), which ran the investigation and the reproduction below on my machine; I asked for this report.

With OPcache loaded but disabled (opcache.enable=0), every reboot of FrankenPHP's PHP threads (a worker restart through the admin API, or a file change with watch) leaks static TLS. After enough reboots, extensions can no longer be loaded at the next PHP startup:

PHP Warning:  PHP Startup: Unable to load dynamic library 'intl' (tried: …/intl (…: cannot open shared object file: No such file or directory), …/no-debug-zts-20240924/intl.so (…/intl.so: cannot allocate memory in static TLS block)) in Unknown on line 0

From then on the extension is missing in every request until the process is restarted (Class "Locale" not found, …). In our app (about 30 extensions, watch in development) this happened after about 95 saved files; with imagick the victim was libgomp.so.1: cannot allocate memory in static TLS block.

Minimal reproduction (official image, only intl)

Dockerfile:

FROM dunglas/frankenphp:1.13.1-php8.4-trixie
RUN install-php-extensions intl

Caddyfile:

{
	frankenphp {
		worker /app/public/worker.php 2
		php_ini opcache.enable 0
	}
}

:80 {
	root * /app/public
	php_server
}

public/worker.php:

<?php
while (frankenphp_handle_request(static function (): void {
    echo 'worker';
})) {
    gc_collect_cycles();
}

public/check.php:

<?php
echo extension_loaded('intl') ? 'intl loaded' : 'intl MISSING';

docker build -t fp-tls .
docker run -d --name fp-tls -v "$PWD/Caddyfile:/etc/frankenphp/Caddyfile:ro" -v "$PWD/public:/app/public:ro" fp-tls
for i in $(seq 1 1000); do
  docker exec fp-tls curl -s -X POST localhost:2019/frankenphp/workers/restart >/dev/null
  docker logs fp-tls 2>&1 | grep -q 'static TLS' && break
done
echo "after $i restarts: $(docker exec fp-tls curl -s localhost/check.php)"

Results (x86_64):

Setup Result
php_ini opcache.enable 0 (OPcache loaded, disabled) intl fails to load after 215 restarts
OPcache enabled (the same without the php_ini line) no failure in 1000 restarts
OPcache not loaded (rm /usr/local/etc/php/conf.d/docker-php-ext-opcache.ini) no failure in 600 restarts
Our app's image, ~30 extensions, opcache.enable 0 fails after 95 restarts
The same, without the php_ini opcache.enable 0 line no failure in 150 restarts
Likely cause

When OPcache is enabled, accel_startup() sets extension->handle = 0 ("Prevent unloading", ext/opcache/ZendAccelerator.c), so opcache.so stays loaded. When it is disabled, accel_startup() returns before that, so opcache.so is unloaded at module shutdown and loaded again by the php_module_startup() that rebootAllThreads() runs (frankenphp_new_main_thread). It looks like glibc does not give back the static TLS of the unloaded ZTS module, so every reboot takes more of the surplus until another extension no longer fits. This is our reading of the source and the measurements; we have not traced glibc's allocator.

Why opcache.enable=0, and workarounds

We disabled OPcache because of the OPcache races under ZTS (php-src GH-8739, #23637, #24319; see also #2714, #2715): in worker mode, restarting workers under load crashed the process with zend_mm_heap corrupted about once in 20 to 50 restarts on PHP 8.4.26.

What worked for us:

  • Not loading OPcache instead of disabling it (what we use now).
  • Raising glibc's reserve with GLIBC_TUNABLES=glibc.rtld.optional_static_tls=1048576: 400 reboots without failure. Note that glibc ignores GLIBC_TUNABLES for the image's /usr/local/bin/frankenphp, because its cap_net_bind_service file capability puts it in secure-execution mode. A copy of the binary without the capability honoured it.

Perhaps worth a note in the docs (disable OPcache by not loading it, not with opcache.enable=0). Alternatively, keep extensions loaded across a thread reboot, as an enabled OPcache does for itself. You know the trade-offs there better than we do.

Build Type

Docker (Debian Trixie)

Worker Mode

Yes

Operating System

GNU/Linux

CPU Architecture

x86_64

PHP configuration
phpinfo() output 
FrankenPHP v1.13.1 PHP 8.4.26 Caddy v2.11.7 (dunglas/frankenphp:1.13.1-php8.4-trixie)
Thread Safety => enabled
glibc 2.41 (Debian 13), host kernel Linux 7.2 x86_64, Docker
Extensions: the image's defaults + intl (installed with install-php-extensions)
php_ini opcache.enable 0
Relevant log output
Relevant log output 
(after many "rebooting all PHP threads" / "workers restarted from admin api")
{"level":"warn","ts":1792408364.6600497,"logger":"frankenphp","msg":"PHP Warning:  PHP Startup: Unable to load dynamic library 'intl' (tried: /usr/local/lib/php/extensions/no-debug-zts-20240924/intl (/usr/local/lib/php/extensions/no-debug-zts-20240924/intl: cannot open shared object file: No such file or directory), /usr/local/lib/php/extensions/no-debug-zts-20240924/intl.so (/usr/local/lib/php/extensions/no-debug-zts-20240924/intl.so: cannot allocate memory in static TLS block)) in Unknown on line 0","syslog_level":"warning"}
Lingua principale
Go
Stelle
11.4k
Fork
494
Merge medio
2g 15h
PR unite (30g)
34

Preparare l'ambiente

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di php/frankenphp

Tutte le issue di php/frankenphp

Issue simili

Altre issue su Go

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.