I don't have the original microSD card for RG36 Pro based on A33 chip

Aberta
#134 1 comentário 0 reações 0 responsáveis Ver no GitHub

Ninguém assumiu esta issue ainda.

Avaliação

Dificuldade
5/5
Tempo estimado
Mais de uma semana
Facilidade para iniciantes
25/100
Tipo de issue
Funcionalidade
Clareza
Precisa de esclarecimento
Status de atividade
Ativa
Domínio
embedded-iot

Direção de pesquisa

The issue provides no source files, tests, or concrete change to make. First read the project’s hardware support documentation and identify how goodluckOS handles the Allwinner A33 board; done would mean confirming whether this device can be supported and documenting the steps or limitations. The issue does not specify the original microSD card contents or a reproducible installation path.

Escrita pelo modelo de indexação a partir do texto da issue.

Descrição

I would love to install goodluckOS.

I took a photo of the mainboard after I failed trying to get ARKOS4Clone installed.
I showed the photo to CoPilot and this is what it had to say:
What I can identify from your board

The large processor at the lower-right is clearly marked:

Allwinner A33 QUAD-CORE

That's the crucial detail.

Your unit is therefore not the RK3326 version described on the usual RG36 Pro information page. That page describes the RG36 Pro as RK3326, but also explicitly warns that there are probably two versions of this handheld, including one with a different chip.

Your photograph provides direct evidence that your particular unit is the alternate hardware version.

I can also see:

Allwinner A33 main SoC
a separate RAM package beside it
an AXP223 power-management IC
board marking around the center that appears to include 202509
two microSD sockets at the top
speaker in the center
ribbon connection for the display
power/reset and volume switches
integrated PCB antenna at the edge

Linguagem predominante
C++
Estrelas
54
Forks
8
Merge médio
16d 19h
PRs com merge (30d)
4

Preparar o ambiente

Este projeto não oferece contêiner de desenvolvimento, Dockerfile nem guia de contribuição, então a configuração fica por sua conta: comece pelo README e veja nosso guia da primeira contribuição para os passos gerais.

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de CodeZombie/goodluckOS

Todas as issues de CodeZombie/goodluckOS

Issues semelhantes

Mais issues de C++

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.