I don't have the original microSD card for RG36 Pro based on A33 chip

Abierto
#134 1 comentario 0 reacciones 0 asignados Ver en GitHub

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
5/5
Tiempo estimado
Más de una semana
Aptitud para principiantes
25/100
Tipo de issue
Nueva funcionalidad
Claridad
Necesita aclaración
Estado de actividad
Activo
Área
embedded-iot

Línea de trabajo

The issue provides no source files, tests, or concrete change to make. First read the project’s hardware support documentation and identify how goodluckOS handles the Allwinner A33 board; done would mean confirming whether this device can be supported and documenting the steps or limitations. The issue does not specify the original microSD card contents or a reproducible installation path.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

I would love to install goodluckOS.

I took a photo of the mainboard after I failed trying to get ARKOS4Clone installed.
I showed the photo to CoPilot and this is what it had to say:
What I can identify from your board

The large processor at the lower-right is clearly marked:

Allwinner A33 QUAD-CORE

That's the crucial detail.

Your unit is therefore not the RK3326 version described on the usual RG36 Pro information page. That page describes the RG36 Pro as RK3326, but also explicitly warns that there are probably two versions of this handheld, including one with a different chip.

Your photograph provides direct evidence that your particular unit is the alternate hardware version.

I can also see:

Allwinner A33 main SoC
a separate RAM package beside it
an AXP223 power-management IC
board marking around the center that appears to include 202509
two microSD sockets at the top
speaker in the center
ribbon connection for the display
power/reset and volume switches
integrated PCB antenna at the edge

Lenguaje dominante
C++
Estrellas
54
Forks
8
Merge medio
16 d 19 h
PR fusionados (30 d)
4

Preparar el entorno

Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de CodeZombie/goodluckOS

Todos los issues de CodeZombie/goodluckOS

Issues similares

Más issues de C++

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.