I don't have the original microSD card for RG36 Pro based on A33 chip

Ouverte
#134 1 commentaire 0 réactions 0 personnes assignées Voir sur GitHub

Personne n'a encore pris cette issue.

Évaluation

Difficulté
5/5
Temps estimé
Plus d'une semaine
Accessibilité débutants
25/100
Type d'issue
Fonctionnalité
Clarté
À clarifier
Activité
Active
Domaine
embedded-iot

Piste de recherche

The issue provides no source files, tests, or concrete change to make. First read the project’s hardware support documentation and identify how goodluckOS handles the Allwinner A33 board; done would mean confirming whether this device can be supported and documenting the steps or limitations. The issue does not specify the original microSD card contents or a reproducible installation path.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

I would love to install goodluckOS.

I took a photo of the mainboard after I failed trying to get ARKOS4Clone installed.
I showed the photo to CoPilot and this is what it had to say:
What I can identify from your board

The large processor at the lower-right is clearly marked:

Allwinner A33 QUAD-CORE

That's the crucial detail.

Your unit is therefore not the RK3326 version described on the usual RG36 Pro information page. That page describes the RG36 Pro as RK3326, but also explicitly warns that there are probably two versions of this handheld, including one with a different chip.

Your photograph provides direct evidence that your particular unit is the alternate hardware version.

I can also see:

Allwinner A33 main SoC
a separate RAM package beside it
an AXP223 power-management IC
board marking around the center that appears to include 202509
two microSD sockets at the top
speaker in the center
ribbon connection for the display
power/reset and volume switches
integrated PCB antenna at the edge

Langage dominant
C++
Étoiles
54
Forks
8
Merge moyen
16 j 19 h
PR mergées (30 j)
4

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de CodeZombie/goodluckOS

Toutes les issues de CodeZombie/goodluckOS

Issues similaires

Plus d'issues C++

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.