`tsci check` and `tsci check netlist` exit 0 when they report errors
メンテナーはふだん 1 日以内に返信
@aswadi がすでに取り組んでいます。
2026年11月12日 から。
評価
- 難易度
- 2/5
- 見積もり時間
- 1〜3時間
- 初心者へのやさしさ
- 57/100
- issue の種類
- バグ
- 明瞭さ
- 明確に書かれている
- 活発さ
- 活発
- 技術スタック
- bun, typescript
調査の方向性
Start with cli/check/register.ts and cli/check/netlist/register.ts, then compare how cli/check/placement/register.ts sets the exit code. Read tests/cli/check/check-all-diagnostics.test.ts and reproduce with the supplied floating-pin.circuit.tsx commands. Done means both check commands return a non-zero exit code when they report errors, with the test expectations updated to match the intended behavior.
索引モデルが issue の本文から書いたものです。
説明
What happens
tsci check netlist and plain tsci check print Errors: 1 and exit with code 0. tsci build on the same file exits 1, and tsci check placement exits 1 when it finds errors, so scripts and CI can't rely on the exit code of these two.
Reproduction
floating-pin.circuit.tsx:
export default () => (
<board width="10mm" height="10mm" routingDisabled>
<chip
name="U1"
footprint="soic8"
pinLabels={{ pin1: "EN", pin4: "GND", pin8: "VCC" }}
pinAttributes={{
EN: { mustBeConnected: true },
VCC: { requiresPower: true },
GND: { requiresGround: true },
}}
connections={{ VCC: "net.VCC", GND: "net.GND" }}
/>
</board>
)
tsci check netlist floating-pin.circuit.tsx; echo "exit=$?"
tsci check floating-pin.circuit.tsx; echo "exit=$?"
tsci build floating-pin.circuit.tsx --disable-parts-engine; echo "exit=$?"
Expected
A non-zero exit code when Errors: is greater than 0.
Actual
$ tsci check netlist floating-pin.circuit.tsx
Errors: 1
Warnings: 0
- source_pin_must_be_connected_error: Port EN on U1 must be connected but is floating
...
exit=0
$ tsci check floating-pin.circuit.tsx
Errors: 1
Warnings: 2
- source_pin_must_be_connected_error: Port EN on U1 must be connected but is floating
...
exit=0
$ tsci build floating-pin.circuit.tsx --disable-parts-engine
Port EN on U1 must be connected but is floating
1 error(s), all written to dist/floating-pin/errors.json:
...
Build exiting with code 1: circuit build errors occurred
exit=1
For comparison, tsci check placement on a board with two overlapping 0402 resistors prints placement summary: 1 pad overlap and exits 1.
Versions
tscircuit 0.0.3161 (@tscircuit/cli 0.1.2454), Bun 1.4.4, Linux.
Cause
The netlist action and the top-level check action only print the output; process.exit(1) is reached only when an exception is thrown:
- https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/cli/check/netlist/register.ts#L99-L107
- https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/cli/check/register.ts#L25-L32
placement sets the exit code from its result (added in #4247):
https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/cli/check/placement/register.ts#L205-L210
pin_specification and source have the same shape as netlist; I haven't found an input that makes them report an error, so I haven't confirmed their exit code.
A test currently pins exit 0 for plain tsci check with Errors: 3 (https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/tests/cli/check/check-all-diagnostics.test.ts#L28-L34), so this may be intentional. #5155 tried the netlist part together with another change; the review questioned that other change and the PR was closed as stale.
Suggestion
If exit 0 is intended, a --fail-on-error flag or a note in the docs would be enough. Otherwise: return the error count from checkNetlist / check and set process.exitCode = 1 when it is non-zero, as placement does.
AI-assisted: I used Claude Code to read the source, run the reproduction above and draft this report.
- 主要言語
- TypeScript
- スター
- 19
- フォーク
- 115
- 平均マージ
- 1時間 50分
- マージ済み PR(30日)
- 260
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
tscircuit/cli のほかの issue
-
@tscircuit/cli 0.1.2452 bundles brace-expansion 2.0.1 and minimatch 5.1.2 (via make-vfs), both with published advisories再び着手できるかも このイシューのプルリクエストはマージされずにクローズされました。 オープン
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 1 日以内に返信
-
tsci dev: ngspice spiceEngine from tscircuit.config.ts fails three ways (package.json, top-level await, blob import)対応中かも @cocvn157 が 10 日前に担当しました。 オープン
難易度 4/5 3〜5日 初心者へのやさしさ 22/100
メンテナーはふだん 1 日以内に返信
-
tsci export -f glb can't load a relative cadModel stepUrl (404); build --glbs can対応中かも @jeffrey-graham が 8 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 25/100
メンテナーはふだん 1 日以内に返信
-
The CLI needs Bun: under Node alone `tsci` fails and the Node entry can't load `.tsx`対応中かも @cocvn157 が 7 日前に担当しました。 オープン
難易度 4/5 1〜2日 初心者へのやさしさ 35/100
tscircuit/cli#5449 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
`tsci check netlist` prints `undefined` after a resistor's value and labels resistor pins anode / cathode対応中かも @cocvn157 が 10 日前に担当しました。 オープン
難易度 3/5 1〜2日 初心者へのやさしさ 35/100
tscircuit/cli#5447 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
似ている issue
-
clawsweeper:fix-shape-clear clawsweeper:queueable-fix clawsweeper:source-repro impact:ux-friction issue-rating: 🦞 diamond lobster no-stale P2
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
openclaw/openclaw#199885 · コメント 2 件 · リアクション 1 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 88/100
-
feature needs-triage
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
BoardGamesEmpire/board-games-empire-backend#1306 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 80/100
sequant-io/sequant#1689 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 80/100