`tsci check netlist` prints `undefined` after a resistor's value and labels resistor pins anode / cathode
メンテナーはふだん 1 日以内に返信
@cocvn157 がすでに取り組んでいます。
2026年11月5日 から。
評価
- 難易度
- 3/5
- 見積もり時間
- 1〜2日
- 初心者へのやさしさ
- 35/100
- issue の種類
- バグ
- 明瞭さ
- 明確に書かれている
- 活発さ
- 停滞
- 技術スタック
- react, typescript
調査の方向性
Start by reproducing the example with the listed tscircuit and CLI versions, then trace how tsci check netlist formats resistor metadata and pin aliases. The issue gives no source files or tests, so locate the relevant formatter and its coverage before making changes. Done means the output omits undefined and shows appropriate resistor pin labels; an open linked pull request (#5475) is already working on the issue.
索引モデルが issue の本文から書いたものです。
説明
For a header, a 1 kΩ 0603 resistor and an LED in series:
export default () => (
<board width="20mm" height="12mm" layers={2}>
<pinheader name="J1" pinCount={2} pitch="2.54mm" pcbX={-6} pcbY={0} />
<resistor name="R1" resistance="1k" footprint="0603" pcbX={1} pcbY={2} />
<led name="D1" color="green" footprint="0603" pcbX={6} pcbY={0} />
<trace name="VIN" from=".J1 > .pin1" to=".R1 > .pin1" />
<trace name="LED_A" from=".R1 > .pin2" to=".D1 > .anode" />
<trace name="GND" from=".D1 > .cathode" to=".J1 > .pin2" />
</board>
)
tsci check netlist prints:
R1 (1kΩ undefined)
- pin1(anode, pos, left): NETS(R1_pos)
- pin2(cathode, neg, right): NETS(D1_pos)
undefined: probably an empty manufacturer part number or package field. Expected: the field left out, or a real value such as0603.- Pin aliases: a resistor's pins are listed with the aliases
anode/cathode(andpos/neg), which belong to diodes and polarised parts. Expected:pin1/pin2, orpos/negat most.
Versions: tscircuit 0.0.2942 (@tscircuit/cli 0.1.2364).
- 主要言語
- TypeScript
- スター
- 19
- フォーク
- 115
- 平均マージ
- 1時間 50分
- マージ済み PR(30日)
- 260
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
tscircuit/cli のほかの issue
-
`tsci check` and `tsci check netlist` exit 0 when they report errors対応中かも @aswadi が 3 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 57/100
メンテナーはふだん 1 日以内に返信
-
@tscircuit/cli 0.1.2452 bundles brace-expansion 2.0.1 and minimatch 5.1.2 (via make-vfs), both with published advisories再び着手できるかも このイシューのプルリクエストはマージされずにクローズされました。 オープン
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 1 日以内に返信
-
tsci dev: ngspice spiceEngine from tscircuit.config.ts fails three ways (package.json, top-level await, blob import)対応中かも @cocvn157 が 10 日前に担当しました。 オープン
難易度 4/5 3〜5日 初心者へのやさしさ 22/100
メンテナーはふだん 1 日以内に返信
-
tsci export -f glb can't load a relative cadModel stepUrl (404); build --glbs can対応中かも @jeffrey-graham が 8 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 25/100
メンテナーはふだん 1 日以内に返信
-
The CLI needs Bun: under Node alone `tsci` fails and the Node entry can't load `.tsx`対応中かも @cocvn157 が 7 日前に担当しました。 オープン
難易度 4/5 1〜2日 初心者へのやさしさ 35/100
tscircuit/cli#5449 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
似ている issue
-
clawsweeper:fix-shape-clear clawsweeper:queueable-fix clawsweeper:source-repro impact:ux-friction issue-rating: 🦞 diamond lobster no-stale P2
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
openclaw/openclaw#199885 · コメント 2 件 · リアクション 1 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 88/100
-
feature needs-triage
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
BoardGamesEmpire/board-games-empire-backend#1306 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 80/100
sequant-io/sequant#1689 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 80/100