`tsci check` and `tsci check netlist` exit 0 when they report errors
I maintainer di solito rispondono entro 1 giorno
@aswadi ci sta già lavorando.
Dal 12/11/2026.
Valutazione
- Difficoltà
- 2/5
- Tempo stimato
- 1-3 ore
- Idoneità per principianti
- 57/100
- Tipo di issue
- Bug
- Chiarezza
- Specificata chiaramente
- Stato di attività
- Attiva
- Stack tecnologico
- bun, typescript
Direzione di ricerca
Start with cli/check/register.ts and cli/check/netlist/register.ts, then compare how cli/check/placement/register.ts sets the exit code. Read tests/cli/check/check-all-diagnostics.test.ts and reproduce with the supplied floating-pin.circuit.tsx commands. Done means both check commands return a non-zero exit code when they report errors, with the test expectations updated to match the intended behavior.
Scritto dal modello di indicizzazione a partire dal testo della issue.
Descrizione
What happens
tsci check netlist and plain tsci check print Errors: 1 and exit with code 0. tsci build on the same file exits 1, and tsci check placement exits 1 when it finds errors, so scripts and CI can't rely on the exit code of these two.
Reproduction
floating-pin.circuit.tsx:
export default () => (
<board width="10mm" height="10mm" routingDisabled>
<chip
name="U1"
footprint="soic8"
pinLabels={{ pin1: "EN", pin4: "GND", pin8: "VCC" }}
pinAttributes={{
EN: { mustBeConnected: true },
VCC: { requiresPower: true },
GND: { requiresGround: true },
}}
connections={{ VCC: "net.VCC", GND: "net.GND" }}
/>
</board>
)
tsci check netlist floating-pin.circuit.tsx; echo "exit=$?"
tsci check floating-pin.circuit.tsx; echo "exit=$?"
tsci build floating-pin.circuit.tsx --disable-parts-engine; echo "exit=$?"
Expected
A non-zero exit code when Errors: is greater than 0.
Actual
$ tsci check netlist floating-pin.circuit.tsx
Errors: 1
Warnings: 0
- source_pin_must_be_connected_error: Port EN on U1 must be connected but is floating
...
exit=0
$ tsci check floating-pin.circuit.tsx
Errors: 1
Warnings: 2
- source_pin_must_be_connected_error: Port EN on U1 must be connected but is floating
...
exit=0
$ tsci build floating-pin.circuit.tsx --disable-parts-engine
Port EN on U1 must be connected but is floating
1 error(s), all written to dist/floating-pin/errors.json:
...
Build exiting with code 1: circuit build errors occurred
exit=1
For comparison, tsci check placement on a board with two overlapping 0402 resistors prints placement summary: 1 pad overlap and exits 1.
Versions
tscircuit 0.0.3161 (@tscircuit/cli 0.1.2454), Bun 1.4.4, Linux.
Cause
The netlist action and the top-level check action only print the output; process.exit(1) is reached only when an exception is thrown:
- https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/cli/check/netlist/register.ts#L99-L107
- https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/cli/check/register.ts#L25-L32
placement sets the exit code from its result (added in #4247):
https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/cli/check/placement/register.ts#L205-L210
pin_specification and source have the same shape as netlist; I haven't found an input that makes them report an error, so I haven't confirmed their exit code.
A test currently pins exit 0 for plain tsci check with Errors: 3 (https://github.com/tscircuit/cli/blob/575228265fd48b2e29ad4c3287b35408e883fb47/tests/cli/check/check-all-diagnostics.test.ts#L28-L34), so this may be intentional. #5155 tried the netlist part together with another change; the review questioned that other change and the PR was closed as stale.
Suggestion
If exit 0 is intended, a --fail-on-error flag or a note in the docs would be enough. Otherwise: return the error count from checkNetlist / check and set process.exitCode = 1 when it is non-zero, as placement does.
AI-assisted: I used Claude Code to read the source, run the reproduction above and draft this report.
- Lingua principale
- TypeScript
- Stelle
- 19
- Fork
- 115
- Merge medio
- 1h 50m
- PR unite (30g)
- 260
Preparare l'ambiente
Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.
Come iniziare
- Leggi tutta la issue e poi la guida ai contributi del progetto.
- Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
- Fai un fork del repository e lavora su un branch.
- Apri una pull request che faccia riferimento al numero della issue.
Altre issue di tscircuit/cli
-
@tscircuit/cli 0.1.2452 bundles brace-expansion 2.0.1 and minimatch 5.1.2 (via make-vfs), both with published advisoriesForse di nuovo libera Una pull request per questa issue è stata chiusa senza essere unita. Aperta
Difficoltà 4/5 3-5 giorni Idoneità per principianti 48/100
I maintainer di solito rispondono entro 1 giorno
-
tsci dev: ngspice spiceEngine from tscircuit.config.ts fails three ways (package.json, top-level await, blob import)Forse già presa @cocvn157 l’ha presa 10 giorni fa. Aperta
Difficoltà 4/5 3-5 giorni Idoneità per principianti 22/100
I maintainer di solito rispondono entro 1 giorno
-
tsci export -f glb can't load a relative cadModel stepUrl (404); build --glbs canForse già presa @jeffrey-graham l’ha presa 8 giorni fa. Aperta
Difficoltà 2/5 1-3 ore Idoneità per principianti 25/100
I maintainer di solito rispondono entro 1 giorno
-
The CLI needs Bun: under Node alone `tsci` fails and the Node entry can't load `.tsx`Forse già presa @cocvn157 l’ha presa 7 giorni fa. Aperta
Difficoltà 4/5 1-2 giorni Idoneità per principianti 35/100
tscircuit/cli#5449 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno
-
`tsci check netlist` prints `undefined` after a resistor's value and labels resistor pins anode / cathodeForse già presa @cocvn157 l’ha presa 10 giorni fa. Aperta
Difficoltà 3/5 1-2 giorni Idoneità per principianti 35/100
tscircuit/cli#5447 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno
Tutte le issue di tscircuit/cli
Issue simili
-
clawsweeper:fix-shape-clear clawsweeper:queueable-fix clawsweeper:source-repro impact:ux-friction issue-rating: 🦞 diamond lobster no-stale P2
Difficoltà 2/5 1-3 ore Idoneità per principianti 68/100
openclaw/openclaw#199885 · 2 commenti · 1 reazione ·
I maintainer di solito rispondono entro 1 giorno
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 88/100
-
feature needs-triage
Difficoltà 2/5 1-3 ore Idoneità per principianti 78/100
BoardGamesEmpire/board-games-empire-backend#1306 ·
I maintainer di solito rispondono entro 1 giorno
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 80/100
sequant-io/sequant#1689 ·
I maintainer di solito rispondono entro 1 giorno
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 80/100