`tsci check netlist` prints `undefined` after a resistor's value and labels resistor pins anode / cathode
Maintainer thường phản hồi trong vòng 1 ngày
@cocvn157 đang làm issue này rồi.
Từ ngày 5/11/2026.
Đánh giá
- Độ khó
- 3/5
- Thời gian dự kiến
- 1-2 ngày
- Mức phù hợp với người mới
- 35/100
- Loại issue
- Lỗi
- Độ rõ ràng
- Đặc tả rõ ràng
- Mức độ hoạt động
- Đình trệ
- Công nghệ
- react, typescript
Hướng nghiên cứu
Start by reproducing the example with the listed tscircuit and CLI versions, then trace how tsci check netlist formats resistor metadata and pin aliases. The issue gives no source files or tests, so locate the relevant formatter and its coverage before making changes. Done means the output omits undefined and shows appropriate resistor pin labels; an open linked pull request (#5475) is already working on the issue.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
For a header, a 1 kΩ 0603 resistor and an LED in series:
export default () => (
<board width="20mm" height="12mm" layers={2}>
<pinheader name="J1" pinCount={2} pitch="2.54mm" pcbX={-6} pcbY={0} />
<resistor name="R1" resistance="1k" footprint="0603" pcbX={1} pcbY={2} />
<led name="D1" color="green" footprint="0603" pcbX={6} pcbY={0} />
<trace name="VIN" from=".J1 > .pin1" to=".R1 > .pin1" />
<trace name="LED_A" from=".R1 > .pin2" to=".D1 > .anode" />
<trace name="GND" from=".D1 > .cathode" to=".J1 > .pin2" />
</board>
)
tsci check netlist prints:
R1 (1kΩ undefined)
- pin1(anode, pos, left): NETS(R1_pos)
- pin2(cathode, neg, right): NETS(D1_pos)
undefined: probably an empty manufacturer part number or package field. Expected: the field left out, or a real value such as0603.- Pin aliases: a resistor's pins are listed with the aliases
anode/cathode(andpos/neg), which belong to diodes and polarised parts. Expected:pin1/pin2, orpos/negat most.
Versions: tscircuit 0.0.2942 (@tscircuit/cli 0.1.2364).
- Ngôn ngữ chính
- TypeScript
- Star
- 19
- Fork
- 115
- Merge trung bình
- 1 giờ 50 phút
- Pull request đã merge (30 ngày)
- 260
Chuẩn bị môi trường
Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của tscircuit/cli
-
`tsci check` and `tsci check netlist` exit 0 when they report errorsCó thể đã có người làm @aswadi đã nhận 3 ngày trước. Đang mở
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 57/100
Maintainer thường phản hồi trong vòng 1 ngày
-
@tscircuit/cli 0.1.2452 bundles brace-expansion 2.0.1 and minimatch 5.1.2 (via make-vfs), both with published advisoriesCó thể làm lại được Pull request cho issue này đã bị đóng mà không được merge. Đang mở
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 48/100
Maintainer thường phản hồi trong vòng 1 ngày
-
tsci dev: ngspice spiceEngine from tscircuit.config.ts fails three ways (package.json, top-level await, blob import)Có thể đã có người làm @cocvn157 đã nhận 10 ngày trước. Đang mở
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 22/100
Maintainer thường phản hồi trong vòng 1 ngày
-
tsci export -f glb can't load a relative cadModel stepUrl (404); build --glbs canCó thể đã có người làm @jeffrey-graham đã nhận 8 ngày trước. Đang mở
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 25/100
Maintainer thường phản hồi trong vòng 1 ngày
-
The CLI needs Bun: under Node alone `tsci` fails and the Node entry can't load `.tsx`Có thể đã có người làm @cocvn157 đã nhận 7 ngày trước. Đang mở
Độ khó 4/5 1-2 ngày Mức phù hợp với người mới 35/100
tscircuit/cli#5449 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
Tất cả issue của tscircuit/cli
Issue tương tự
-
clawsweeper:fix-shape-clear clawsweeper:queueable-fix clawsweeper:source-repro impact:ux-friction issue-rating: 🦞 diamond lobster no-stale P2
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
openclaw/openclaw#199885 · 2 bình luận · 1 reaction ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 88/100
-
feature needs-triage
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 78/100
BoardGamesEmpire/board-games-empire-backend#1306 ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 80/100
sequant-io/sequant#1689 ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 80/100