Error during compilation for NodeMCU (12.1E)

レポートで指定されている ArduinoIoTCloud の tinycbor ソース、cborpretty.c と cbortojson.c から始めます。特に、PRIx8、PRIu8、PRIu32、PRIu64 を使用している記載の行を確認してください。NodeMCU 1.0 (ESP-12E) ボード上で生成されたスケッチを使ってビルドを再現し、このコンパイラ向けにこれらのフォーマットマクロがどのように定義されているかを調べます。Arduino IoT Cloud スケッチが報告されたエラーなしでコンパイルできれば完了です。

I am working on ArduinoIoTColud project and I'm using the auto-generated script from the ArduinoIotCloud.
The following error occurred during the compilation.

Code

#include "arduino_secrets.h"

_/* 
  Sketch generated by the Arduino IoT Cloud Thing 
  https://create.arduino.cc/cloud/things/

  Arduino IoT Cloud Variables description

  The following variables are automatically generated and updated when changes are made to the Thing

  CloudLight switch1;
  CloudLight switch3;
  CloudTemperatureSensor temp;
  CloudLight switch2;

  Variables which are marked as READ/WRITE in the Cloud Thing will also have functions
  which are called when their values are changed from the Dashboard.
  These functions are generated with the Thing and added at the end of this sketch.
*/

#include "thingProperties.h"

void setup() {
  // Initialize serial and wait for port to open:
  Serial.begin(9600);
  // This delay gives the chance to wait for a Serial Monitor without blocking if none is found
  delay(1500); 

  // Defined in thingProperties.h
  initProperties();

  // Connect to Arduino IoT Cloud
  ArduinoCloud.begin(ArduinoIoTPreferredConnection);
  
  /*
     The following function allows you to obtain more information
     related to the state of network and IoT Cloud connection and errors
     the higher number the more granular information you’ll get.
     The default is 0 (only errors).
     Maximum is 4
 */
  setDebugMessageLevel(2);
  ArduinoCloud.printDebugInfo();
}

void loop() {
  ArduinoCloud.update();
  // Your code here 
  
  
}

void onSwitch1Change() {
  // Do something
}


void onSwitch2Change() {
  // Do something
}


void onSwitch3Change() {
  // Do something
}_

Error Details

Arduino: 1.8.15 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200"

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c: In function 'hexDump':

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:195:32: error: expected ')' before '__INT8'

  195 |         err = stream(out, "%02" PRIx8, *buffer++);

      |                                ^

      |                                )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c: In function 'utf8EscapedDump':

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:251:39: error: expected ')' before '__INT32'

  251 |             err = stream(out, "\\u%04" PRIX32 "\\u%04" PRIX32,

      |                                       ^

      |                                       )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:257:39: error: expected ')' before '__INT32'

  257 |             err = stream(out, "\\u%04" PRIX32, uc);

      |                                       ^

      |                                       )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c: In function 'value_to_pretty':

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:382:34: error: expected ')' before '__INT64'

  382 |             err = stream(out, "%" PRIu64, val);

      |                                  ^

      |                                  )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:387:39: error: expected ')' before '__INT64'

  387 |                 err = stream(out, "-%" PRIu64, val);

      |                                       ^

      |                                       )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:457:30: error: expected ')' before '__INT64'

  457 |         err = stream(out, "%" PRIu64 "%s(", tag, get_indicator(it, flags));

      |                              ^

      |                              )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:473:37: error: expected ')' before '__INT8'

  473 |         err = stream(out, "simple(%" PRIu8 ")", simple_type);

      |                                     ^

      |                                     )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cborpretty.c:531:36: error: expected ')' before '__INT64'

  531 |             err = stream(out, "%s%" PRIu64 ".%s", val < 0 ? "-" : "", ival, suffix);

      |                                    ^

      |                                    )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c: In function 'add_value_metadata':

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c:297:39: error: expected ')' before '__INT64'

  297 |         if (fprintf(out, "\"tag\":\"%" PRIu64 "\"%s", status->lastTag,

      |                                       ^

      |                                       )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c:316:40: error: expected ')' before '__INT64'

  316 |         if (fprintf(out, ",\"v\":\"%c%" PRIx64 "\"", flags & NumberWasNegative ? '-' : '+',

      |                                        ^

      |                                        )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c: In function 'tagged_value_to_json':

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c:351:35: error: expected ')' before '__INT64'

  351 |         if (fprintf(out, "{\"tag%" PRIu64 "\":", tag) < 0)

      |                                   ^

      |                                   )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c:359:39: error: expected ')' before '__INT64'

  359 |             if (fprintf(out, ",\"tag%" PRIu64 "$cbor\":{", tag) < 0 ||

      |                                       ^

      |                                       )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c: In function 'value_to_json':

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c:578:38: error: expected ')' before '__INT8'

  578 |         if (fprintf(out, "\"simple(%" PRIu8 ")\"", simple_type) < 0)

      |                                      ^

      |                                      )

C:\Users\xxx\Documents\Arduino\libraries\ArduinoIoTCloud\src\cbor\lib\tinycbor\src\cbortojson.c:637:39: error: expected ')' before '__INT64'

  637 |                 r = fprintf(out, "%s%" PRIu64, val < 0 ? "-" : "", ival);

      |                                       ^

      |                                       )

exit status 1

Error compiling for board NodeMCU 1.0 (ESP-12E Module).

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.