perf: split BytecodeInterpreter.execute for default C2 compilation
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 25/100
- issue の種類
- リファクタリング
- 明瞭さ
- 明確に書かれている
- 活発さ
- 活発
- 技術スタック
- java
- 領域
- backend, performance
調査の方向性
Start by reading BytecodeInterpreter.execute(SuspendedInterpreterFrame) and the profiling skill at .agents/skills/profile-perlonjava/SKILL.md; use dev/bench/benchmark_eval_string.pl to reproduce the eval STRING workload. Split the dispatch path while preserving opcode behavior and JVM/interpreter parity, then check HotSpot diagnostics, project tests, and the make gate. Compare randomized paired runs against the exact parent and check representative workloads and startup cost; done means default flags produce effective C2 compilation with a measured improvement and no material regression.
索引モデルが issue の本文から書いたものです。
説明
Summary
Split BytecodeInterpreter.execute(SuspendedInterpreterFrame) into smaller dispatch/handler methods so HotSpot's default C2 policy can optimize the eval STRING interpreter path without globally enabling compilation of huge methods.
This is follow-up work to eval performance investigations on master. PR #2059 contains allocation and frame-pooling changes, but its performance effect was small and did not address the dispatch method's JIT compilation limit.
Evidence
On master commit 3e725aa6e1 (Temurin 24.0.2, Apple Silicon), async-profiler sampling of dev/bench/benchmark_eval_string.pl showed BytecodeInterpreter.execute as the largest CPU leaf (199 of 1,694 samples, C1), followed by StatementResolver.parseStatement (59) and CompileAssignment.compileAssignmentOperator (48).
HotSpot compilation diagnostics report the private execute(SuspendedInterpreterFrame) method at 23,790 bytecodes. The default DontCompileHugeMethods policy prevents C2 from optimizing this hot dispatch path; the log also reports it as too large to inline.
As a diagnostic, disabling that policy with -XX:-DontCompileHugeMethods caused the 23,790-byte method to reach C2 level 4. Five randomized default/flag pairs on the same master JAR measured:
| Default | C2 enabled | Speedup |
|---|---|---|
| 52.4k/s | 102.7k/s | 1.96x |
| 60.7k/s | 98.1k/s | 1.62x |
| 65.7k/s | 98.3k/s | 1.50x |
| 71.2k/s | 106.9k/s | 1.50x |
| 73.2k/s | 114.3k/s | 1.56x |
Each run executes one million iterations of dev/bench/benchmark_eval_string.pl. The geometric mean paired gain is about 1.60x. Host load caused variance in both modes; all five pairs favored C2.
Goal
Reduce the dispatch method's bytecode size enough that the normal JVM policy compiles its hot path effectively. Prefer extracting cold opcode families and keeping common eval opcodes on a direct, JIT-friendly path. Keep opcode semantics, exception behavior, interpreter state, and JVM/interpreter parity unchanged.
The global -XX:-DontCompileHugeMethods flag is a measured interim option, but this issue is to determine whether a source-level split can get the same or better result without changing HotSpot's huge-method policy for every method in the process.
Acceptance
- HotSpot diagnostics on supported Java versions show the refactored hot interpreter path gets C2 compilation with default JVM flags.
- Standard Perl behavior and project-owned tests cover affected opcode families; JVM and interpreter backends remain compatible.
- Run the repository
makegate on the immutable candidate. - Compare default-flag performance against the exact parent using randomized paired eval STRING benchmark runs with operation counts/checksums; retain the split only when the paired interval shows a real improvement.
- Check representative non-eval workloads and startup/compilation cost so a faster eval benchmark does not hide a material regression elsewhere.
Related
- PR #2059: https://github.com/fglock/PerlOnJava/pull/2059
- Performance goal #1196: https://github.com/fglock/PerlOnJava/issues/1196
dev/bench/benchmark_eval_string.pl.agents/skills/profile-perlonjava/SKILL.md
- 主要言語
- Perl
- スター
- 67
- フォーク
- 8
- 平均マージ
- 5時間 12分
- マージ済み PR(30日)
- 131
環境構築
- Dockerfile または Docker Compose ファイルあり
- プルリクエストのテンプレートなし
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
fglock/PerlOnJava のほかの issue
-
area:cpan-port bug
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
fglock/PerlOnJava#2153 ·
メンテナーはふだん 1 日以内に返信
-
area:cpan-port area:parser bug
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
fglock/PerlOnJava#2137 ·
メンテナーはふだん 1 日以内に返信
-
area:backend area:cpan-port area:runtime bug
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
fglock/PerlOnJava#2071 ·
メンテナーはふだん 1 日以内に返信
-
area:runtime documentation enhancement
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
fglock/PerlOnJava#1579 ·
メンテナーはふだん 1 日以内に返信
-
area:cpan-port bug
難易度 3/5 1〜2日 初心者へのやさしさ 62/100
fglock/PerlOnJava#2157 ·
メンテナーはふだん 1 日以内に返信
fglock/PerlOnJava の issue をすべて見る
似ている issue
-
Dev-output directory preparation accepts file-valued lib/include paths and fails on dangling linksオープンteam-cli
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
メンテナーはふだん 2 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100
-
難易度 1/5 1時間未満 初心者へのやさしさ 93/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 73/100
inverse-inc/packetfence#9728 ·
メンテナーはふだん 1 日以内に返信
-
fix(char-create): show the real reason a character is refused対応中かも @baphomello が 1 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 84/100
メンテナーはふだん 1 日以内に返信