[Release Tracking] system-config-printer 1.5.19 milestone
メンテナーはふだん 2 日以内に返信
@alexpevzner がすでに取り組んでいます。
2026年11月3日 から。
評価
この issue はまだ評価されていません。
説明
Tracking issue for the 1.5.19 release.
This issue tracks the main changes since 1.5.18, remaining release work, and will serve as the basis for the 1.5.19 release notes. It can be closed once 1.5.19 is released.
Done
New Printer wizard
- Improved printer discovery and ordering, including DNS-SD and IPP-over-USB devices.
- Hide already configured printers from the list of discovered devices
- Multi-protocol printers are listed as a single device with multiple connection options, not as multiple devices, as it was before
- IPP-over-USB devices are shown as local devices, not network devices
- Improved driver selection and display.
- Validate driverless PPDs before recommending them, with manual selection as fallback.
- Pre-select the detected manufacturer for LPD/LPR printers.
- Improved Duplicate Printer handling.
Stability and responsiveness
- Fixed GTK crashes and UI freezes during printer and driver operations.
- Moved blocking
getServerPPD()work away from the GTK main thread. - Fixed PackageKit D-Bus lifecycle handling.
- Fixed freezes in the New Printer wizard.
- Fixed a Printer Properties crash caused by
Noneoption values.
UI and cleanup
- Improved the appearance of read-only/non-editable fields.
- Removed the unnecessary Cairo dependency from the spinner.
Other upstream fixes
- Fixed Python 3.12 build issues.
- Fixed
debugprint()handling. - Fixed a
jobviewer.pyTypeError. - Improved device exit handling.
- Updated translations.
Planned
- Integrate and test the discovery-first New Printer UI (#490).
- Run a regression pass of the New Printer wizard covering USB, IPP/IPP-over-USB, DNS-SD, LPD/LPR, SMB and driverless printers.
- Address any remaining blocking operations found during testing.
- Complete translation updates.
- Update the version to 1.5.19.
- Finalize release notes, create the 1.5.19 tag and publish the release.
Future work
CUPS 3.x modernization and compatibility work will continue separately from the 1.5.19 release and is not considered a blocker for this milestone.
Release checklist
- Release-targeted changes merged
- New Printer wizard regression testing completed
- Remaining blocking operations reviewed
- Translations updated
- Release notes finalized
- Version bumped to 1.5.19
- 1.5.19 tagged and released
Close this issue when system-config-printer 1.5.19 is released.
- 主要言語
- Python
- スター
- 209
- フォーク
- 111
- 平均マージ
- 2日 3時間
- マージ済み PR(30日)
- 8
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
OpenPrinting/system-config-printer のほかの issue
-
Job viewer shows "Printer error" for cups-waiting-for-job-completed対応中かも @RonitMehta08 が 5 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 86/100
OpenPrinting/system-config-printer#494 ·
メンテナーはふだん 2 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 44/100
OpenPrinting/system-config-printer#499 ·
メンテナーはふだん 2 日以内に返信
-
Scannerオープン
難易度 3/5 1〜2日 初心者へのやさしさ 25/100
OpenPrinting/system-config-printer#407 · コメント 1 件 ·
メンテナーはふだん 2 日以内に返信
-
Doesn't run with PYTHONSAFEPATH enabled対応中かも @xovishnukosuri が 250 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 58/100
OpenPrinting/system-config-printer#387 ·
メンテナーはふだん 2 日以内に返信
-
system-config-printer can't open printer properties because job-cancel-after value is None対応中かも @xovishnukosuri が 250 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 55/100
OpenPrinting/system-config-printer#385 · コメント 1 件 ·
メンテナーはふだん 2 日以内に返信
OpenPrinting/system-config-printer の issue をすべて見る
似ている issue
-
難易度 1/5 1時間未満 初心者へのやさしさ 61/100
scverse/infercnvpy#238 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 77/100
skrub-data/skrub#2442 ·
メンテナーはふだん 1 日以内に返信
-
due_at is one hour late on the autumn DST change day (real-time delta added to a zoneinfo datetime)オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 74/100
-
難易度 2/5 1〜3時間 初心者へのやさしさ 77/100
open-feature/python-sdk-contrib#482 ·
メンテナーはふだん 1 日以内に返信
-
enhancement
難易度 1/5 1時間未満 初心者へのやさしさ 94/100
warlock20/StartWithA#443 ·
メンテナーはふだん 1 日以内に返信