[Release Tracking] system-config-printer 1.5.19 milestone
维护者通常 2 天内回复
@alexpevzner 已经在做这个了。
开始于 2026年11月3日。
评估
这个 Issue 还没有评估数据。
描述
Tracking issue for the 1.5.19 release.
This issue tracks the main changes since 1.5.18, remaining release work, and will serve as the basis for the 1.5.19 release notes. It can be closed once 1.5.19 is released.
Done
New Printer wizard
- Improved printer discovery and ordering, including DNS-SD and IPP-over-USB devices.
- Hide already configured printers from the list of discovered devices
- Multi-protocol printers are listed as a single device with multiple connection options, not as multiple devices, as it was before
- IPP-over-USB devices are shown as local devices, not network devices
- Improved driver selection and display.
- Validate driverless PPDs before recommending them, with manual selection as fallback.
- Pre-select the detected manufacturer for LPD/LPR printers.
- Improved Duplicate Printer handling.
Stability and responsiveness
- Fixed GTK crashes and UI freezes during printer and driver operations.
- Moved blocking
getServerPPD()work away from the GTK main thread. - Fixed PackageKit D-Bus lifecycle handling.
- Fixed freezes in the New Printer wizard.
- Fixed a Printer Properties crash caused by
Noneoption values.
UI and cleanup
- Improved the appearance of read-only/non-editable fields.
- Removed the unnecessary Cairo dependency from the spinner.
Other upstream fixes
- Fixed Python 3.12 build issues.
- Fixed
debugprint()handling. - Fixed a
jobviewer.pyTypeError. - Improved device exit handling.
- Updated translations.
Planned
- Integrate and test the discovery-first New Printer UI (#490).
- Run a regression pass of the New Printer wizard covering USB, IPP/IPP-over-USB, DNS-SD, LPD/LPR, SMB and driverless printers.
- Address any remaining blocking operations found during testing.
- Complete translation updates.
- Update the version to 1.5.19.
- Finalize release notes, create the 1.5.19 tag and publish the release.
Future work
CUPS 3.x modernization and compatibility work will continue separately from the 1.5.19 release and is not considered a blocker for this milestone.
Release checklist
- Release-targeted changes merged
- New Printer wizard regression testing completed
- Remaining blocking operations reviewed
- Translations updated
- Release notes finalized
- Version bumped to 1.5.19
- 1.5.19 tagged and released
Close this issue when system-config-printer 1.5.19 is released.
- 主要语言
- Python
- 星标
- 209
- 派生
- 111
- 平均合并
- 2 天 3 小时
- 30 天内合并 PR
- 8
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
OpenPrinting/system-config-printer 的其他 Issue
-
Job viewer shows "Printer error" for cups-waiting-for-job-completed可能已有人在做 @RonitMehta08 于 5 天前认领。 未关闭
难度 2/5 1-3 小时 新手友好度 86/100
OpenPrinting/system-config-printer#494 ·
维护者通常 2 天内回复
-
难度 4/5 3-5 天 新手友好度 44/100
OpenPrinting/system-config-printer#499 ·
维护者通常 2 天内回复
-
Scanner未关闭
难度 3/5 1-2 天 新手友好度 25/100
OpenPrinting/system-config-printer#407 · 1 条评论 ·
维护者通常 2 天内回复
-
Doesn't run with PYTHONSAFEPATH enabled可能已有人在做 @xovishnukosuri 于 250 天前认领。 未关闭
难度 2/5 1-3 小时 新手友好度 58/100
OpenPrinting/system-config-printer#387 ·
维护者通常 2 天内回复
-
system-config-printer can't open printer properties because job-cancel-after value is None可能已有人在做 @xovishnukosuri 于 250 天前认领。 未关闭
难度 2/5 1-3 小时 新手友好度 55/100
OpenPrinting/system-config-printer#385 · 1 条评论 ·
维护者通常 2 天内回复
查看 OpenPrinting/system-config-printer 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 82/100
NVlabs/physical_ai_av#29 ·
-
难度 1/5 1-3 小时 新手友好度 90/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 67/100
维护者通常 1 天内回复
-
难度 1/5 1 小时以内 新手友好度 85/100
UKGovernmentBEIS/inspect_ai#6666 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 68/100
维护者通常 1 天内回复