8814A retry carve-out bench: blocked on rig 8814AU health (3081 fw-boot dead)

オープン
#376 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
25/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
静か
技術スタック
c, linux

調査の方向性

The remaining work is a hardware A/B on a healthy 8814A, using tests/kestrel_retry_witness.sh with the command and limits listed in the issue; tests/adapter_doctor_cold.sh is the formal grading pass. First restore or access a healthy bench rig, then measure both arms. Done means obtaining the stated modal copies without TX-wedge, then following the issue’s pass/fail outcome; the issue is blocked by unavailable hardware.

索引モデルが issue の本文から書いたものです。

説明

The last open item from #365 (step 5), split out so the parent could close on its measured results.

State: branch 8814a-retry-audit carries the audited change — write DATA_RETRY_LIMIT from cfg on the 8814A like every other die. The carve-out it removes traces to byte-matching 88XXau's monitor-injection descriptor during the #50 silence hunt (the kernel leaves the field 0 because its injection path never retries), not to a die erratum: RETRY_LIMIT_ENABLE=1 in both drivers, and the OWN/DISQSELSEQ + GID skips — which DO encode real 8814A field-meaning differences — stay.

The blocker: the bench 8814AU's 3081 MCU no longer boots — _Fwdl8814_KernelPath: RSVD-page ack failed + CPU_DL_READY never asserted across two real VBUS cold cycles (including an 8 s drain) at hub 3-2.3 port 2. Dead host TX with or without the change, so neither arm of the A/B is measurable. tests/adapter_doctor_cold.sh is the formal grading pass when someone is at the bench.

The bench (ready to run on a healthy 8814A):

sudo TX_PID=0x8813 WIT_PID=0xc812 LIMITS="0 2 8" SECS=8 bash tests/kestrel_retry_witness.sh

Pass = limit-obedient modal copies {1,3,9} (the field counts retries on 11ac dies) and no TX-wedge (rc=-7 patterns). Then: merge the branch, flip tx_retry_limit_ok for CHIP_8814A, update the truth tables. Fail = keep the carve-out, but documented as measured rather than inherited — the acceptable outcome #365 named.

Refs: #365 (parent), #374/#375 (the sibling steps that closed it), branch 8814a-retry-audit.

主要言語
C
スター
56
フォーク
29
平均マージ
3時間 43分
マージ済み PR(30日)
75

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

OpenIPC/devourer のほかの issue

OpenIPC/devourer の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。