8814A retry carve-out bench: blocked on rig 8814AU health (3081 fw-boot dead)

未关闭
#376 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
25/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
冷清
技术栈
c, linux

调研方向

The remaining work is a hardware A/B on a healthy 8814A, using tests/kestrel_retry_witness.sh with the command and limits listed in the issue; tests/adapter_doctor_cold.sh is the formal grading pass. First restore or access a healthy bench rig, then measure both arms. Done means obtaining the stated modal copies without TX-wedge, then following the issue’s pass/fail outcome; the issue is blocked by unavailable hardware.

由索引模型根据 Issue 内容生成。

描述

The last open item from #365 (step 5), split out so the parent could close on its measured results.

State: branch 8814a-retry-audit carries the audited change — write DATA_RETRY_LIMIT from cfg on the 8814A like every other die. The carve-out it removes traces to byte-matching 88XXau's monitor-injection descriptor during the #50 silence hunt (the kernel leaves the field 0 because its injection path never retries), not to a die erratum: RETRY_LIMIT_ENABLE=1 in both drivers, and the OWN/DISQSELSEQ + GID skips — which DO encode real 8814A field-meaning differences — stay.

The blocker: the bench 8814AU's 3081 MCU no longer boots — _Fwdl8814_KernelPath: RSVD-page ack failed + CPU_DL_READY never asserted across two real VBUS cold cycles (including an 8 s drain) at hub 3-2.3 port 2. Dead host TX with or without the change, so neither arm of the A/B is measurable. tests/adapter_doctor_cold.sh is the formal grading pass when someone is at the bench.

The bench (ready to run on a healthy 8814A):

sudo TX_PID=0x8813 WIT_PID=0xc812 LIMITS="0 2 8" SECS=8 bash tests/kestrel_retry_witness.sh

Pass = limit-obedient modal copies {1,3,9} (the field counts retries on 11ac dies) and no TX-wedge (rc=-7 patterns). Then: merge the branch, flip tx_retry_limit_ok for CHIP_8814A, update the truth tables. Fail = keep the carve-out, but documented as measured rather than inherited — the acceptable outcome #365 named.

Refs: #365 (parent), #374/#375 (the sibling steps that closed it), branch 8814a-retry-audit.

主要语言
C
星标
56
派生
29
平均合并
3 小时 43 分钟
30 天内合并 PR
75

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

OpenIPC/devourer 的其他 Issue

查看 OpenIPC/devourer 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。