GA36-MB V1.1-20251025 (Allwinner A33): v0.0.1 works, v0.1.0 a33_panel1 gives black screen and a33_panel2 gives vertical stripes

オープン
#104 コメント 1 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
35/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c, cpp, linux
領域
embedded-iot

調査の方向性

Compare the working v0.0.1 H/W Variant A image with the v0.1.0 panel1 and panel2 images for the GA36-MB V1.1-20251025 board with Allwinner A33. Start by checking the display configuration and DTB used by each image; the reporter offers to provide DTB files and additional photos. Done means identifying a compatible display configuration and confirming the screen renders correctly on this hardware.

索引モデルが issue の本文から書いたものです。

説明

Hi! First of all, thanks for the project. I got goodluckOS running on my console, and I'm reporting which version worked and which didn't in case it helps other people with the same hardware.

Device

  • Console: Vaboston GA36-R36SCLONE (R36S clone)
  • Board marking: GA36-MB V1.1-20251025
  • SoC: Allwinner A33
  • Original firmware: EmuELEC 4.7 (clone image from the vaboston/GA36-R36SClone repo)

What I tried

  • v0.0.1 [H/W Variant A]: works. The console boots and goodluckOS runs normally.
  • v0.1.0, goodluck_base_a33_panel1.zip: black screen after pressing power.
  • v0.1.0, goodluck_base_a33_panel2.zip: the console boots (blue background), but the middle of the screen shows heavy vertical stripes/garbled image (photo attached).

Expected behavior
The image displays correctly on a GA36-MB V1.1-20251025.

Notes

  • It looks like the board boots, but the display config in v0.1.0 doesn't match this screen. Since v0.0.1 works, I suspect my panel is covered by Variant A but not by the current panel1/panel2 images.
  • Happy to test other builds or provide more info (DTB, photos of the board, etc.) if that helps.

Thanks again!

Image
主要言語
C++
スター
54
フォーク
8
平均マージ
16日 19時間
マージ済み PR(30日)
4

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

CodeZombie/goodluckOS のほかの issue

CodeZombie/goodluckOS の issue をすべて見る

似ている issue

C++ の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。