GA36-MB V1.1-20251025 (Allwinner A33): v0.0.1 works, v0.1.0 a33_panel1 gives black screen and a33_panel2 gives vertical stripes

Ouverte
#104 1 commentaire 0 réactions 0 personnes assignées Voir sur GitHub

Personne n'a encore pris cette issue.

Évaluation

Difficulté
4/5
Temps estimé
3-5 jours
Accessibilité débutants
35/100
Type d'issue
Bug
Clarté
Plutôt claire
Activité
Active
Stack technique
c, cpp, linux
Domaine
embedded-iot

Piste de recherche

Compare the working v0.0.1 H/W Variant A image with the v0.1.0 panel1 and panel2 images for the GA36-MB V1.1-20251025 board with Allwinner A33. Start by checking the display configuration and DTB used by each image; the reporter offers to provide DTB files and additional photos. Done means identifying a compatible display configuration and confirming the screen renders correctly on this hardware.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

Hi! First of all, thanks for the project. I got goodluckOS running on my console, and I'm reporting which version worked and which didn't in case it helps other people with the same hardware.

Device

  • Console: Vaboston GA36-R36SCLONE (R36S clone)
  • Board marking: GA36-MB V1.1-20251025
  • SoC: Allwinner A33
  • Original firmware: EmuELEC 4.7 (clone image from the vaboston/GA36-R36SClone repo)

What I tried

  • v0.0.1 [H/W Variant A]: works. The console boots and goodluckOS runs normally.
  • v0.1.0, goodluck_base_a33_panel1.zip: black screen after pressing power.
  • v0.1.0, goodluck_base_a33_panel2.zip: the console boots (blue background), but the middle of the screen shows heavy vertical stripes/garbled image (photo attached).

Expected behavior
The image displays correctly on a GA36-MB V1.1-20251025.

Notes

  • It looks like the board boots, but the display config in v0.1.0 doesn't match this screen. Since v0.0.1 works, I suspect my panel is covered by Variant A but not by the current panel1/panel2 images.
  • Happy to test other builds or provide more info (DTB, photos of the board, etc.) if that helps.

Thanks again!

Image
Langage dominant
C++
Étoiles
54
Forks
8
Merge moyen
16 j 19 h
PR mergées (30 j)
4

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de CodeZombie/goodluckOS

Toutes les issues de CodeZombie/goodluckOS

Issues similaires

Plus d'issues C++

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.