GA36-MB V1.1-20251025 (Allwinner A33): v0.0.1 works, v0.1.0 a33_panel1 gives black screen and a33_panel2 gives vertical stripes

Aperta
#104 1 commento 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
35/100
Tipo di issue
Bug
Chiarezza
Abbastanza chiara
Stato di attività
Attiva
Stack tecnologico
c, cpp, linux
Ambito
embedded-iot

Direzione di ricerca

Compare the working v0.0.1 H/W Variant A image with the v0.1.0 panel1 and panel2 images for the GA36-MB V1.1-20251025 board with Allwinner A33. Start by checking the display configuration and DTB used by each image; the reporter offers to provide DTB files and additional photos. Done means identifying a compatible display configuration and confirming the screen renders correctly on this hardware.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

Hi! First of all, thanks for the project. I got goodluckOS running on my console, and I'm reporting which version worked and which didn't in case it helps other people with the same hardware.

Device

  • Console: Vaboston GA36-R36SCLONE (R36S clone)
  • Board marking: GA36-MB V1.1-20251025
  • SoC: Allwinner A33
  • Original firmware: EmuELEC 4.7 (clone image from the vaboston/GA36-R36SClone repo)

What I tried

  • v0.0.1 [H/W Variant A]: works. The console boots and goodluckOS runs normally.
  • v0.1.0, goodluck_base_a33_panel1.zip: black screen after pressing power.
  • v0.1.0, goodluck_base_a33_panel2.zip: the console boots (blue background), but the middle of the screen shows heavy vertical stripes/garbled image (photo attached).

Expected behavior
The image displays correctly on a GA36-MB V1.1-20251025.

Notes

  • It looks like the board boots, but the display config in v0.1.0 doesn't match this screen. Since v0.0.1 works, I suspect my panel is covered by Variant A but not by the current panel1/panel2 images.
  • Happy to test other builds or provide more info (DTB, photos of the board, etc.) if that helps.

Thanks again!

Image
Lingua principale
C++
Stelle
54
Fork
8
Merge medio
16g 19h
PR unite (30g)
4

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di CodeZombie/goodluckOS

Tutte le issue di CodeZombie/goodluckOS

Issue simili

Altre issue su C++

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.