tsci dev: ngspice spiceEngine from tscircuit.config.ts fails three ways (package.json, top-level await, blob import)
I maintainer di solito rispondono entro 1 giorno
Valutazione
- Difficoltà
- 4/5
- Tempo stimato
- 3-5 giorni
- Idoneità per principianti
- 22/100
- Tipo di issue
- Bug
- Chiarezza
- Abbastanza chiara
- Stato di attività
- Attiva
- Stack tecnologico
- bun, react, typescript
Direzione di ricerca
Start in loadTscircuitConfig, where tscircuit.config.ts is evaluated, and compare how importEvalPath resolves @tscircuit/ngspice-spice-engine against the tsci build path. The browser failure needs the analog simulation loader and the blob import resolution, which the payload does not show. Done means tsci dev loads the ngspice config, runs the analog simulation without the blob import error, and the top-level await case works or gives a clear message.
Scritto dal modello di indicizzazione a partire dal testo della issue.
Descrizione
Problem
A project that registers ngspice in tscircuit.config.ts works with tsci build and tsci simulate, but not in tsci dev. There are three separate failures in a row. The first two have workarounds; the third doesn't.
Versions: tscircuit 0.0.3062 (CLI), @tscircuit/core 0.0.2259, @tscircuit/ngspice-spice-engine 0.0.22, @tscircuit/eval 0.0.1696, macOS arm64, Bun 1.3.14.
Repro
tsci init ngspice-dev-repro -y && cd ngspice-dev-repro
index.circuit.tsx:
export default () => (
<board width="20mm" height="15mm" routingDisabled>
<voltagesource name="V1" voltage="5V" />
<resistor name="R1" resistance="1k" connections={{ pin1: ".V1 > .pin1" }} />
<capacitor name="C1" capacitance="10uF" connections={{ pin1: ".R1 > .pin2", pin2: ".V1 > .pin2" }} />
<voltageprobe name="VCAP" connectsTo=".C1 > .pin1" />
<analogsimulation duration="50ms" timePerStep="0.5ms" spiceEngine="ngspice" />
</board>
)
Failure 1: package not in package.json
tscircuit.config.ts:
import createNgspiceSpiceEngine from "@tscircuit/ngspice-spice-engine"
export default {
platformConfig: { spiceEngineMap: { ngspice: await createNgspiceSpiceEngine() } },
}
tsci build index.circuit.tsx works (the package is installed as a transitive dependency of tscircuit). tsci dev → Errors:
Execution Error: Node module imported but not in package.json "@tscircuit/ngspice-spice-engine"
importEvalPath("./tscircuit.config.ts", ...) importLocalFile("tscircuit.config.ts")
importEvalPath("@tscircuit/ngspice-spice-engine", ...) importNodeModule("@tscircuit/ngspice-spice-engine")
at loadTscircuitConfig
Workaround: bun add -d @tscircuit/ngspice-spice-engine.
Failure 2: top-level await in tscircuit.config.ts
With the same config, tsci dev then shows:
Execution Error: Error evaluating "tscircuit.config.ts": Unexpected identifier '_ngspicespiceengine2'
at loadTscircuitConfig
The in-browser evaluator can't handle the top-level await, though the CLI can. Workaround: create the engine lazily.
let engine: ReturnType<typeof createNgspiceSpiceEngine> | undefined
export default {
platformConfig: {
spiceEngineMap: {
ngspice: {
simulate: async (spice: string) => {
engine ??= createNgspiceSpiceEngine()
return (await engine).simulate(spice)
},
},
},
},
}
Failure 3: the engine can't load in the dev browser (no workaround)
The config now loads, and the PCB view renders. ⋯ → Analog Simulation shows:
Error running analog simulation
Import "blob:http://localhost:3020/352059b6-0861-489a-8d1d-2f9bf2683551" not found in "node_modules/@tscircuit/ngspice-spice-engine/dist"
The same circuit with the default spicey engine (no spiceEngine prop) renders its graph in the Analog Simulation view.
Expected
Either ngspice works in tsci dev, or the docs say that spiceEngine="ngspice" is CLI-only. It would also help if failures 1 and 2 gave a hint, since the same config works in tsci build.
🤖 Generated with Claude Code
- Lingua principale
- TypeScript
- Stelle
- 19
- Fork
- 115
- Merge medio
- 1h 50m
- PR unite (30g)
- 260
Preparare l'ambiente
Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.
Come iniziare
- Leggi tutta la issue e poi la guida ai contributi del progetto.
- Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
- Fai un fork del repository e lavora su un branch.
- Apri una pull request che faccia riferimento al numero della issue.
Altre issue di tscircuit/cli
-
`tsci check` and `tsci check netlist` exit 0 when they report errorsForse già presa @aswadi l’ha presa 3 giorni fa. Aperta
Difficoltà 2/5 1-3 ore Idoneità per principianti 57/100
I maintainer di solito rispondono entro 1 giorno
-
@tscircuit/cli 0.1.2452 bundles brace-expansion 2.0.1 and minimatch 5.1.2 (via make-vfs), both with published advisoriesForse di nuovo libera Una pull request per questa issue è stata chiusa senza essere unita. Aperta
Difficoltà 4/5 3-5 giorni Idoneità per principianti 48/100
I maintainer di solito rispondono entro 1 giorno
-
tsci export -f glb can't load a relative cadModel stepUrl (404); build --glbs canForse già presa @jeffrey-graham l’ha presa 8 giorni fa. Aperta
Difficoltà 2/5 1-3 ore Idoneità per principianti 25/100
I maintainer di solito rispondono entro 1 giorno
-
The CLI needs Bun: under Node alone `tsci` fails and the Node entry can't load `.tsx`Forse già presa @cocvn157 l’ha presa 7 giorni fa. Aperta
Difficoltà 4/5 1-2 giorni Idoneità per principianti 35/100
tscircuit/cli#5449 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno
-
`tsci check netlist` prints `undefined` after a resistor's value and labels resistor pins anode / cathodeForse già presa @cocvn157 l’ha presa 10 giorni fa. Aperta
Difficoltà 3/5 1-2 giorni Idoneità per principianti 35/100
tscircuit/cli#5447 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno
Tutte le issue di tscircuit/cli
Issue simili
-
area:cli area:security bug priority:medium
Difficoltà 2/5 1-3 ore Idoneità per principianti 82/100
rtk-ai/rtk#5127 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno
-
"code source" and "numerique.gouv" links: "new window" mention duplicated in the accessible nameApertaaccessibility
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
numerique-gouv/lasuite-landingpage#315 ·
I maintainer di solito rispondono entro 1 giorno
-
needs:triage
Difficoltà 1/5 Meno di un'ora Idoneità per principianti 92/100
I maintainer di solito rispondono entro 1 giorno
-
Difficoltà 1/5 Meno di un'ora Idoneità per principianti 72/100
HyeokjaeChoi/vaultme#585 ·
I maintainer di solito rispondono entro 1 giorno
-
enhancement priority/P2
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
beettlle/pi-smart-router#200 ·