tsci dev: ngspice spiceEngine from tscircuit.config.ts fails three ways (package.json, top-level await, blob import)
Los mantenedores suelen responder en 1 día
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 22/100
- Tipo de issue
- Error
- Claridad
- Bastante claro
- Estado de actividad
- Activo
- Stack tecnológico
- bun, react, typescript
Línea de trabajo
Start in loadTscircuitConfig, where tscircuit.config.ts is evaluated, and compare how importEvalPath resolves @tscircuit/ngspice-spice-engine against the tsci build path. The browser failure needs the analog simulation loader and the blob import resolution, which the payload does not show. Done means tsci dev loads the ngspice config, runs the analog simulation without the blob import error, and the top-level await case works or gives a clear message.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Problem
A project that registers ngspice in tscircuit.config.ts works with tsci build and tsci simulate, but not in tsci dev. There are three separate failures in a row. The first two have workarounds; the third doesn't.
Versions: tscircuit 0.0.3062 (CLI), @tscircuit/core 0.0.2259, @tscircuit/ngspice-spice-engine 0.0.22, @tscircuit/eval 0.0.1696, macOS arm64, Bun 1.3.14.
Repro
tsci init ngspice-dev-repro -y && cd ngspice-dev-repro
index.circuit.tsx:
export default () => (
<board width="20mm" height="15mm" routingDisabled>
<voltagesource name="V1" voltage="5V" />
<resistor name="R1" resistance="1k" connections={{ pin1: ".V1 > .pin1" }} />
<capacitor name="C1" capacitance="10uF" connections={{ pin1: ".R1 > .pin2", pin2: ".V1 > .pin2" }} />
<voltageprobe name="VCAP" connectsTo=".C1 > .pin1" />
<analogsimulation duration="50ms" timePerStep="0.5ms" spiceEngine="ngspice" />
</board>
)
Failure 1: package not in package.json
tscircuit.config.ts:
import createNgspiceSpiceEngine from "@tscircuit/ngspice-spice-engine"
export default {
platformConfig: { spiceEngineMap: { ngspice: await createNgspiceSpiceEngine() } },
}
tsci build index.circuit.tsx works (the package is installed as a transitive dependency of tscircuit). tsci dev → Errors:
Execution Error: Node module imported but not in package.json "@tscircuit/ngspice-spice-engine"
importEvalPath("./tscircuit.config.ts", ...) importLocalFile("tscircuit.config.ts")
importEvalPath("@tscircuit/ngspice-spice-engine", ...) importNodeModule("@tscircuit/ngspice-spice-engine")
at loadTscircuitConfig
Workaround: bun add -d @tscircuit/ngspice-spice-engine.
Failure 2: top-level await in tscircuit.config.ts
With the same config, tsci dev then shows:
Execution Error: Error evaluating "tscircuit.config.ts": Unexpected identifier '_ngspicespiceengine2'
at loadTscircuitConfig
The in-browser evaluator can't handle the top-level await, though the CLI can. Workaround: create the engine lazily.
let engine: ReturnType<typeof createNgspiceSpiceEngine> | undefined
export default {
platformConfig: {
spiceEngineMap: {
ngspice: {
simulate: async (spice: string) => {
engine ??= createNgspiceSpiceEngine()
return (await engine).simulate(spice)
},
},
},
},
}
Failure 3: the engine can't load in the dev browser (no workaround)
The config now loads, and the PCB view renders. ⋯ → Analog Simulation shows:
Error running analog simulation
Import "blob:http://localhost:3020/352059b6-0861-489a-8d1d-2f9bf2683551" not found in "node_modules/@tscircuit/ngspice-spice-engine/dist"
The same circuit with the default spicey engine (no spiceEngine prop) renders its graph in the Analog Simulation view.
Expected
Either ngspice works in tsci dev, or the docs say that spiceEngine="ngspice" is CLI-only. It would also help if failures 1 and 2 gave a hint, since the same config works in tsci build.
🤖 Generated with Claude Code
- Lenguaje dominante
- TypeScript
- Estrellas
- 19
- Forks
- 115
- Merge medio
- 1 h 50 min
- PR fusionados (30 d)
- 260
Preparar el entorno
Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de tscircuit/cli
-
`tsci check` and `tsci check netlist` exit 0 when they report errorsPosiblemente ocupada @aswadi la tomó hace 3 días. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 57/100
Los mantenedores suelen responder en 1 día
-
@tscircuit/cli 0.1.2452 bundles brace-expansion 2.0.1 and minimatch 5.1.2 (via make-vfs), both with published advisoriesQuizá libre de nuevo Un pull request para esta issue se cerró sin fusionarse. Abierto
Dificultad 4/5 3-5 días Aptitud para principiantes 48/100
Los mantenedores suelen responder en 1 día
-
tsci export -f glb can't load a relative cadModel stepUrl (404); build --glbs canPosiblemente ocupada @jeffrey-graham la tomó hace 8 días. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 25/100
Los mantenedores suelen responder en 1 día
-
The CLI needs Bun: under Node alone `tsci` fails and the Node entry can't load `.tsx`Posiblemente ocupada @cocvn157 la tomó hace 7 días. Abierto
Dificultad 4/5 1-2 días Aptitud para principiantes 35/100
tscircuit/cli#5449 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
`tsci check netlist` prints `undefined` after a resistor's value and labels resistor pins anode / cathodePosiblemente ocupada @cocvn157 la tomó hace 10 días. Abierto
Dificultad 3/5 1-2 días Aptitud para principiantes 35/100
tscircuit/cli#5447 · 1 comentario ·
Los mantenedores suelen responder en 1 día
Todos los issues de tscircuit/cli
Issues similares
-
clawsweeper:fix-shape-clear clawsweeper:queueable-fix clawsweeper:source-repro impact:ux-friction issue-rating: 🦞 diamond lobster no-stale P2
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
openclaw/openclaw#199885 · 2 comentarios · 1 reacción ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 88/100
-
feature needs-triage
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
BoardGamesEmpire/board-games-empire-backend#1306 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 80/100
sequant-io/sequant#1689 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 80/100