RTL8733BS support — SDIO transport + 8733BS (follow-up to #233)

Aperta
#234 0 commenti 0 reazioni 0 assegnatari Vedi su GitHub

I maintainer di solito rispondono entro 1 giorno

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
5/5
Tempo stimato
Più di una settimana
Idoneità per principianti
28/100
Tipo di issue
Funzionalità
Chiarezza
Abbastanza chiara
Stato di attività
Tranquilla
Stack tecnologico
c

Direzione di ricerca

Start by reading src/RtlTransport.h and the existing PCIe transport and CreateRtlDevicePcie path; the issue also depends on #233 landing first. Decide the host-side SDIO access model, then scope the new SDIO transport, CMD52/53 register access, FIFO frame transfer, and bus-specific bring-up. Done means an SDIO open/factory path supports RTL8733BS without changing the HAL.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

enhancement help wanted

Summary

Follow-up to #233 (RTL8733BU USB support). Add the SDIO sibling RTL8733BS — the bus variant used on OpenIPC camera SoCs (Ingenic/Sigmastar).

Why this is separate / larger

Once #233 lands, the 8733B HAL (halmac 87xx, phydm tables, RF/narrowband, coex) is done and bus-neutral — it holds an RtlAdapter and never touches the bus directly. The remaining work is a brand-new SDIO transport, which devourer does not have today:

  • New SdioTransport implementing devourer::IRtlTransport (src/RtlTransport.h) — register plane over SDIO CMD52/53 (byte + block IO) instead of USB vendor control; frame plane over the SDIO TX/RX FIFO.
  • is_usb() returns false; wire the SDIO-specific bring-up rows (RX agg, FIFO/queue mapping, no USB DLFW 512-pad) the way PCIe already gates its bus-specific steps.
  • Host-side SDIO access model (mmc/sdio userspace path) — the analog of "the caller owns libusb / vfio" for SDIO. Needs a design decision.
  • Factory: add an SdioTransport::Open(...) + CreateRtlDeviceSdio(...) path mirroring CreateRtlDevicePcie.

Depends on

  • #233 (8733B HAL, USB-first) merged.

Out of scope

The HAL itself — reused unchanged from #233.


The USB HAL in #233 is deliberately bus-neutral so this reduces to a transport port + host-access model.

Lingua principale
C
Stelle
56
Fork
29
Merge medio
3h 43m
PR unite (30g)
75

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di OpenIPC/devourer

Tutte le issue di OpenIPC/devourer

Issue simili

Altre issue su C

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.