RTL8733BS support — SDIO transport + 8733BS (follow-up to #233)

Abierto
#234 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Los mantenedores suelen responder en 1 día

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
5/5
Tiempo estimado
Más de una semana
Aptitud para principiantes
28/100
Tipo de issue
Nueva funcionalidad
Claridad
Bastante claro
Estado de actividad
Tranquilo
Stack tecnológico
c

Línea de trabajo

Start by reading src/RtlTransport.h and the existing PCIe transport and CreateRtlDevicePcie path; the issue also depends on #233 landing first. Decide the host-side SDIO access model, then scope the new SDIO transport, CMD52/53 register access, FIFO frame transfer, and bus-specific bring-up. Done means an SDIO open/factory path supports RTL8733BS without changing the HAL.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

enhancement help wanted

Summary

Follow-up to #233 (RTL8733BU USB support). Add the SDIO sibling RTL8733BS — the bus variant used on OpenIPC camera SoCs (Ingenic/Sigmastar).

Why this is separate / larger

Once #233 lands, the 8733B HAL (halmac 87xx, phydm tables, RF/narrowband, coex) is done and bus-neutral — it holds an RtlAdapter and never touches the bus directly. The remaining work is a brand-new SDIO transport, which devourer does not have today:

  • New SdioTransport implementing devourer::IRtlTransport (src/RtlTransport.h) — register plane over SDIO CMD52/53 (byte + block IO) instead of USB vendor control; frame plane over the SDIO TX/RX FIFO.
  • is_usb() returns false; wire the SDIO-specific bring-up rows (RX agg, FIFO/queue mapping, no USB DLFW 512-pad) the way PCIe already gates its bus-specific steps.
  • Host-side SDIO access model (mmc/sdio userspace path) — the analog of "the caller owns libusb / vfio" for SDIO. Needs a design decision.
  • Factory: add an SdioTransport::Open(...) + CreateRtlDeviceSdio(...) path mirroring CreateRtlDevicePcie.

Depends on

  • #233 (8733B HAL, USB-first) merged.

Out of scope

The HAL itself — reused unchanged from #233.


The USB HAL in #233 is deliberately bus-neutral so this reduces to a transport port + host-access model.

Lenguaje dominante
C
Estrellas
56
Forks
29
Merge medio
3 h 43 min
PR fusionados (30 d)
75

Preparar el entorno

Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de OpenIPC/devourer

Todos los issues de OpenIPC/devourer

Issues similares

Más issues de C

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.