RTL8733BS support — SDIO transport + 8733BS (follow-up to #233)

Ouverte
#234 0 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Les mainteneurs répondent en général sous 1 jour

Personne n'a encore pris cette issue.

Évaluation

Difficulté
5/5
Temps estimé
Plus d'une semaine
Accessibilité débutants
28/100
Type d'issue
Fonctionnalité
Clarté
Plutôt claire
Activité
Calme
Stack technique
c
Domaine
backend, networking

Piste de recherche

Start by reading src/RtlTransport.h and the existing PCIe transport and CreateRtlDevicePcie path; the issue also depends on #233 landing first. Decide the host-side SDIO access model, then scope the new SDIO transport, CMD52/53 register access, FIFO frame transfer, and bus-specific bring-up. Done means an SDIO open/factory path supports RTL8733BS without changing the HAL.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

enhancement help wanted

Summary

Follow-up to #233 (RTL8733BU USB support). Add the SDIO sibling RTL8733BS — the bus variant used on OpenIPC camera SoCs (Ingenic/Sigmastar).

Why this is separate / larger

Once #233 lands, the 8733B HAL (halmac 87xx, phydm tables, RF/narrowband, coex) is done and bus-neutral — it holds an RtlAdapter and never touches the bus directly. The remaining work is a brand-new SDIO transport, which devourer does not have today:

  • New SdioTransport implementing devourer::IRtlTransport (src/RtlTransport.h) — register plane over SDIO CMD52/53 (byte + block IO) instead of USB vendor control; frame plane over the SDIO TX/RX FIFO.
  • is_usb() returns false; wire the SDIO-specific bring-up rows (RX agg, FIFO/queue mapping, no USB DLFW 512-pad) the way PCIe already gates its bus-specific steps.
  • Host-side SDIO access model (mmc/sdio userspace path) — the analog of "the caller owns libusb / vfio" for SDIO. Needs a design decision.
  • Factory: add an SdioTransport::Open(...) + CreateRtlDeviceSdio(...) path mirroring CreateRtlDevicePcie.

Depends on

  • #233 (8733B HAL, USB-first) merged.

Out of scope

The HAL itself — reused unchanged from #233.


The USB HAL in #233 is deliberately bus-neutral so this reduces to a transport port + host-access model.

Langage dominant
C
Étoiles
56
Forks
29
Merge moyen
3 h 43 min
PR mergées (30 j)
75

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de OpenIPC/devourer

Toutes les issues de OpenIPC/devourer

Issues similaires

Plus d'issues C

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.