InvalidEncodingError reports line 1 when the invalid byte is in the row separator detection sample (File/IO input)

Offen
#385 1 Kommentar 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
3/5
Geschätzter Aufwand
1-2 Tage
Anfängerfreundlichkeit
68/100
Issue-Typ
Bug
Klarheit
Klar beschrieben
Aktivitätsstatus
Aktiv
Tech-Stack
ruby
Bereich
backend

Rechercherichtung

Start in lib/csv/parser.rb at resolve_row_separator and build_scanner, then trace how sampled input reaches InputsScanner and raises InvalidEncodingError. Add a regression test for invalid bytes on a later line in File input, comparing its reported line number with String input. Done when both report the correct line and the relevant CSV tests pass.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

When the input is a File (or another IO) and an invalid byte sequence appears inside the sample read for row separator detection, CSV::InvalidEncodingError always reports line 1, even if the bad byte is on a later line. The same data given as a String or StringIO reports the correct line.

Reproduce
require "csv"
require "tempfile"

def try(label)
  yield
rescue CSV::MalformedCSVError => e
  puts "#{label}: #{e.class}: #{e.message} (line_number=#{e.line_number})"
end

small = "a,b\n\xFF,1\n".b
large = ("a,b\n\x80,1\n" + "x,y\n" * 16384).b  # 64 KiB, no 0xFF byte

[["small", small], ["large", large]].each do |name, data|
  Tempfile.create(["t", ".csv"]) do |f|
    f.binmode
    f.write(data)
    f.close
    try("#{name} String") { CSV.parse(data.dup.force_encoding("UTF-8")) }
    try("#{name} File  ") { CSV.read(f.path, encoding: "UTF-8") }
  end
end
Actual

csv 3.3.7 (Ruby 4.1.0dev) and current main:

small String: CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 2. (line_number=2)
small File  : CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 1. (line_number=1)
large String: CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 2. (line_number=2)
large File  : CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 1. (line_number=1)

CSV.foreach(path), CSV.new(File.open(path)) and CSV.new(io) for a pipe give the same result. I see the same with csv 3.1.9 (Ruby 3.0.0, MalformedCSVError), 3.2.8 (Ruby 3.3.0) and 3.3.5 (Ruby 4.0.0). If the bad byte is on line 3, the file case still says line 1.

Expected

line 2. / line_number=2 for the file input too, as for String/StringIO.

Cause

With row_sep: :auto, resolve_row_separator reads a sample with @input.gets(nil, chunk_size) (32 KiB for File, 1 KiB for other IOs):
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L703-L713

build_scanner computes the line number of an invalid byte only when the sample is the whole input:
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L886-L901

Otherwise the sample is wrapped in a StringIO for InputsScanner, whose constructor calls read_chunk, which raises InvalidEncoding for the whole sample before any row is parsed:
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L313-L316

@scanner is still nil at that point, so parse reports @lineno + 1, i.e. 1:
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L426-L433

So the line is wrong whenever the bad byte is in a sample that doesn't reach EOF (the "large" case above).

The "small" case hits this too, because IO#gets(nil, limit) stops right after a 0xFF byte. For rs = nil, rb_io_getline_0 passes newline = -1 to appendline, and search_delim does memchr(p, -1, len), which matches 0xFF. So the sample is only "a,b\n\xFF", not the whole file:
https://github.com/ruby/ruby/blob/v4.0.0/io.c#L4200
https://github.com/ruby/ruby/blob/v4.0.0/io.c#L3885

File.binwrite("t", "ab\xFFcd")
File.open("t", "rb") { |f| f.gets(nil, 100) } #=> "ab\xFF"

That part looks like a Ruby core issue (I can report it separately), but csv would still report the wrong line for large inputs even after it is fixed.

Possible fix

Run the same per-line check as the "whole input" branch on the samples before building InputsScanner:

         if string
-          unless string.valid_encoding?
-            index = string.lines(@row_separator).index do |line|
-              !line.valid_encoding?
-            end
-            if index
-              raise InvalidEncodingError.new(@encoding, @lineno + index + 1)
-            end
-          end
+          check_sample_encoding(string)
           Scanner.new(string)
         else
+          check_sample_encoding(@samples.join(""))
           inputs = @samples.collect do |sample|
             StringIO.new(sample)
           end
@@
+    def check_sample_encoding(sample)
+      return if sample.valid_encoding?
+      index = sample.lines(@row_separator).index do |line|
+        !line.valid_encoding?
+      end
+      if index
+        raise InvalidEncodingError.new(@encoding, @lineno + index + 1)
+      end
+    end

With this change both cases above report line 2, and the test suite passes with and without CSV_PARSER_SCANNER_TEST=yes. Like the existing string branch, it raises before yielding the rows that come before the bad line in the sample, which is what happens today anyway. I can open a PR with a test if this direction is OK.

🤖 Generated with Claude Code

Vorherrschende Sprache
Ruby
Sterne
220
Forks
139
Ø Merge
1 T. 1 Std.
Gemergte PRs (30 T.)
2

Entwicklungsumgebung

Dieses Projekt bietet weder Dev-Container noch Dockerfile noch Beitragsleitfaden – die Einrichtung liegt bei Ihnen. Beginnen Sie mit der README; die allgemeinen Schritte stehen in unserem Leitfaden für den ersten Beitrag.

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus ruby/csv

Alle Issues in ruby/csv

Ähnliche Issues

Weitere Issues zu Ruby

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.