InvalidEncodingError reports line 1 when the invalid byte is in the row separator detection sample (File/IO input)
Chưa có ai nhận issue này.
Đánh giá
- Độ khó
- 3/5
- Thời gian dự kiến
- 1-2 ngày
- Mức phù hợp với người mới
- 68/100
Hướng nghiên cứu
Start in lib/csv/parser.rb at resolve_row_separator and build_scanner, then trace how sampled input reaches InputsScanner and raises InvalidEncodingError. Add a regression test for invalid bytes on a later line in File input, comparing its reported line number with String input. Done when both report the correct line and the relevant CSV tests pass.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
When the input is a File (or another IO) and an invalid byte sequence appears inside the sample read for row separator detection, CSV::InvalidEncodingError always reports line 1, even if the bad byte is on a later line. The same data given as a String or StringIO reports the correct line.
Reproduce
require "csv"
require "tempfile"
def try(label)
yield
rescue CSV::MalformedCSVError => e
puts "#{label}: #{e.class}: #{e.message} (line_number=#{e.line_number})"
end
small = "a,b\n\xFF,1\n".b
large = ("a,b\n\x80,1\n" + "x,y\n" * 16384).b # 64 KiB, no 0xFF byte
[["small", small], ["large", large]].each do |name, data|
Tempfile.create(["t", ".csv"]) do |f|
f.binmode
f.write(data)
f.close
try("#{name} String") { CSV.parse(data.dup.force_encoding("UTF-8")) }
try("#{name} File ") { CSV.read(f.path, encoding: "UTF-8") }
end
end
Actual
csv 3.3.7 (Ruby 4.1.0dev) and current main:
small String: CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 2. (line_number=2)
small File : CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 1. (line_number=1)
large String: CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 2. (line_number=2)
large File : CSV::InvalidEncodingError: Invalid byte sequence in UTF-8 in line 1. (line_number=1)
CSV.foreach(path), CSV.new(File.open(path)) and CSV.new(io) for a pipe give the same result. I see the same with csv 3.1.9 (Ruby 3.0.0, MalformedCSVError), 3.2.8 (Ruby 3.3.0) and 3.3.5 (Ruby 4.0.0). If the bad byte is on line 3, the file case still says line 1.
Expected
line 2. / line_number=2 for the file input too, as for String/StringIO.
Cause
With row_sep: :auto, resolve_row_separator reads a sample with @input.gets(nil, chunk_size) (32 KiB for File, 1 KiB for other IOs):
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L703-L713
build_scanner computes the line number of an invalid byte only when the sample is the whole input:
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L886-L901
Otherwise the sample is wrapped in a StringIO for InputsScanner, whose constructor calls read_chunk, which raises InvalidEncoding for the whole sample before any row is parsed:
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L313-L316
@scanner is still nil at that point, so parse reports @lineno + 1, i.e. 1:
https://github.com/ruby/csv/blob/v3.3.7/lib/csv/parser.rb#L426-L433
So the line is wrong whenever the bad byte is in a sample that doesn't reach EOF (the "large" case above).
The "small" case hits this too, because IO#gets(nil, limit) stops right after a 0xFF byte. For rs = nil, rb_io_getline_0 passes newline = -1 to appendline, and search_delim does memchr(p, -1, len), which matches 0xFF. So the sample is only "a,b\n\xFF", not the whole file:
https://github.com/ruby/ruby/blob/v4.0.0/io.c#L4200
https://github.com/ruby/ruby/blob/v4.0.0/io.c#L3885
File.binwrite("t", "ab\xFFcd")
File.open("t", "rb") { |f| f.gets(nil, 100) } #=> "ab\xFF"
That part looks like a Ruby core issue (I can report it separately), but csv would still report the wrong line for large inputs even after it is fixed.
Possible fix
Run the same per-line check as the "whole input" branch on the samples before building InputsScanner:
if string
- unless string.valid_encoding?
- index = string.lines(@row_separator).index do |line|
- !line.valid_encoding?
- end
- if index
- raise InvalidEncodingError.new(@encoding, @lineno + index + 1)
- end
- end
+ check_sample_encoding(string)
Scanner.new(string)
else
+ check_sample_encoding(@samples.join(""))
inputs = @samples.collect do |sample|
StringIO.new(sample)
end
@@
+ def check_sample_encoding(sample)
+ return if sample.valid_encoding?
+ index = sample.lines(@row_separator).index do |line|
+ !line.valid_encoding?
+ end
+ if index
+ raise InvalidEncodingError.new(@encoding, @lineno + index + 1)
+ end
+ end
With this change both cases above report line 2, and the test suite passes with and without CSV_PARSER_SCANNER_TEST=yes. Like the existing string branch, it raises before yielding the rows that come before the bad line in the sample, which is what happens today anyway. I can open a PR with a test if this direction is OK.
🤖 Generated with Claude Code
- Ngôn ngữ chính
- Ruby
- Star
- 220
- Fork
- 139
- Merge trung bình
- 1 ngày 1 giờ
- Pull request đã merge (30 ngày)
- 2
Chuẩn bị môi trường
Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của ruby/csv
-
Unknown converter name is silently accepted and later fails with "undefined method 'arity' for nil"Đang mở
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 57/100
-
Timeout on WindowsCó thể làm lại được @kou đã nhận 406 ngày trước và không có pull request nào đang mở. Đang mở
-
FiberError/NoMemoryError error related to csv gem occurs when upgrading from ruby 3.1 to 3.3Đang mở
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 35/100
-
Recipes not copied downstreamĐang mở
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 25/100
-
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 15/100
Issue tương tự
-
🐛 bug 👩💻 équipe CE 🧑🏭 entreprises
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 76/100
betagouv/conseillers-entreprises#4808 ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 78/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 76/100
yosiat/panko_serializer#250 ·
-
[Server Submission]: Aspera CLIĐang mở
Độ khó 1/5 Dưới một giờ Mức phù hợp với người mới 75/100
cline/mcp-marketplace#3886 ·
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 78/100