[Bug]: Windows 11 guests never reach the logon screen (boot spinner forever) and fresh installs fail on AMD Ryzen 5600H host; Linux guest works
Maintainer antworten meist innerhalb von 6 Tagen
Dieses Issue hat noch niemand übernommen.
Bewertung
- Schwierigkeit
- 5/5
- Geschätzter Aufwand
- Über eine Woche
- Anfängerfreundlichkeit
- 12/100
- Issue-Typ
- Bug
- Klarheit
- Muss geklärt werden
- Aktivitätsstatus
- Aktiv
- Tech-Stack
- c, linux
- Bereich
- operating-systems
Rechercherichtung
No source file or test is named; start from the attached LOG.zip and the VBox.log of a hung boot, comparing the Windows 11 VM settings (EFI/Secure Boot, TPM, PIIX3, SVM) against the working Debian guest. Reproduce on the 7.2.22 host, then narrow whether the hang is in guest execution, AMD-V setup, or Guest Additions. Done means a confirmed root cause or a minimal reproducer maintainers can act on, not a speculative patch.
Vom Indexierungsmodell aus dem Issue-Text verfasst.
Beschreibung
Version
7.2.22
Host OS Type
Linux
Host OS name + version
Arch Linux, kernel 7.2.14-zen1 / 7.2.14-arch1 / 7.3.4-zen2
Host Architecture
x86
Guest OS Type
Windows
Guest Architecture
x86
Guest OS name + version
Windows 11 Pro 26H2, build 26300.9974
Component
Unspecified
What happened?
A Windows 11 guest that was installed and working on 11 Nov 2026 (several
successful reboots, Guest Additions 7.2.22 and SQL Server installed) can no
longer complete a boot since 14 Nov 2026. Every cold boot or guest-initiated
reboot stays on the boot logo with the spinning circle indefinitely.
Observations:
- VBox.log shows no error. The guest keeps making progress at first: Guest
Additions drivers load, VBoxService starts about 20 s after power-on, the
shared folder is auto-mounted, and the display driver keeps drawing the
spinner. The logon screen never appears and VBoxTray never starts. - While it is stuck, the VirtualBoxVM process uses little host CPU
(roughly 8-25 % of a 12-thread CPU), so the guest seems to be waiting
rather than working. - Restoring an online snapshot (saved state) works: the Windows desktop is
fully usable until Windows is restarted, then it hangs as above. - The Windows Recovery Environment boots normally in the same VM.
- A fresh Windows 11 install in a brand-new VM (same ISO that worked on
11 Nov) fails with "Windows 11 installation has failed", typically around
78 %. Reproduced in three attempts. - A Debian 13 guest installs and reboots correctly on the same host.
Host: Medion Erazer Deputy P25 laptop, AMD Ryzen 5 5600H (microcode
0x0A500012), 32 GB RAM, NVIDIA RTX 3060 + AMD iGPU, Arch Linux, KDE Plasma
6.8.2, VirtualBox OSE from the Arch repositories (virtualbox 7.2.22-1 and
7.2.22-2, virtualbox-host-dkms), VMs stored on a SATA SSD (ext4).
Guest VM: Windows 11 Pro 26H2 build 26300.9974, 6 vCPUs, 16 GB RAM, EFI with
Secure Boot, TPM 2.0, PIIX3 chipset, AHCI, VBoxSVGA 128 MB without 3D, NAT
(82540EM), default paravirtualization interface.
What was tried, without any effect
- Kernels 7.3.4-zen2, 7.2.14-zen1 and stock 7.2.14-arch1
- VirtualBox packages 7.2.22-2 and 7.2.22-1 (host modules rebuilt each time)
- Full rollback of the root filesystem (Timeshift) to its state before the
14 Nov system update (which had brought kernel 7.3.4, openssl 4.1,
qt6-base, mesa, nvidia 620) - kvm_amd/kvm loaded, and fully blocked (lsmod empty while the VM runs)
- Nested VT-x/AMD-V off, audio disabled, TPM set to None
- Paravirtualization interface None and Legacy
- 4 and 6 vCPUs, 8 and 16 GB RAM, PIIX3 and ICH9 chipsets
- Headless start (no GUI frontend)
- "Use Host I/O Cache" on the SATA controller
- Guest clock set back 5 days with the network adapter disabled
- Guest Additions uninstalled; SQL Server services set to manual
- auto-cpufreq and tuned stopped, UFW disabled
- VirtualBox.xml (global configuration) reset and the VM re-registered
Host checks: no kernel oops or MCE in the journal, SMART clean on the SSD,
8 GB direct write at 244 MB/s without errors, all VM disk images read back
without error.
memtester 16G, 1 loop: all tests ok.
How can we reproduce this?
- Host as described above, VirtualBox 7.2.22.
- Start any Windows 11 26H2 guest from power-off, or restart Windows inside
a restored snapshot. - The guest stays on the boot spinner forever. Installing Windows 11 from
the ISO in a new VM fails during setup instead.
Did you upload all of your necessary log files, screenshots, etc.?
- Yes, I've uploaded all pertinent files to this issue.
- Vorherrschende Sprache
- C
- Sterne
- 1.4k
- Forks
- 219
- PR-Merge-Kennzahlen
- Keine gemergten PRs in 30 T.
Entwicklungsumgebung
- Kein Dockerfile und keine Docker-Compose-Datei
- Keine Pull-Request-Vorlage
- Beitragsleitfaden lesen
Erste Schritte
- Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
- Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
- Forken Sie das Repository und arbeiten Sie in einem Branch.
- Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.
Mehr aus VirtualBox/virtualbox
-
bug
Schwierigkeit 1/5 Unter einer Stunde Anfängerfreundlichkeit 84/100
VirtualBox/virtualbox#996 ·
Maintainer antworten meist innerhalb von 6 Tagen
-
enhancement
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 68/100
VirtualBox/virtualbox#979 ·
Maintainer antworten meist innerhalb von 6 Tagen
-
[Bug]: Guest Additions 7.2.20 vboxvideo fails to build on Linux kernel 6.12.113 (drm_fb_helper_restore_fbdev_mode_unlocked: too few arguments)Evtl. vergeben @Berbe hat das vor 18 Tagen übernommen. Offenbug
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 76/100
VirtualBox/virtualbox#918 · 9 Kommentare ·
Maintainer antworten meist innerhalb von 6 Tagen
-
bug
Schwierigkeit 4/5 3-5 Tage Anfängerfreundlichkeit 25/100
VirtualBox/virtualbox#995 ·
Maintainer antworten meist innerhalb von 6 Tagen
-
bug
Schwierigkeit 3/5 1-2 Tage Anfängerfreundlichkeit 45/100
VirtualBox/virtualbox#994 ·
Maintainer antworten meist innerhalb von 6 Tagen
Alle Issues in VirtualBox/virtualbox
Ähnliche Issues
-
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 80/100
ESPresense/ESPresense#2680 · 2 Kommentare ·
Maintainer antworten meist innerhalb von 1 Tag
-
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 74/100
ImageMagick/ImageMagick#9134 ·
Maintainer antworten meist innerhalb von 1 Tag
-
Builder: a structure opened without calculation data shows the Diffraction (fibre) view by defaultOffenbug
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 65/100
FriendsofECCE/ECCE#1245 · 1 Kommentar ·
-
Arch: ARM/AArch64 Doc
Schwierigkeit 1/5 Unter einer Stunde Anfängerfreundlichkeit 90/100
RT-Thread/rt-thread#12082 · 1 Kommentar ·
Maintainer antworten meist innerhalb von 2 Tagen
-
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 72/100
apache/nuttx-apps#4108 · 4 Kommentare ·
Maintainer antworten meist innerhalb von 1 Tag