[Bug]: Windows 11 guests never reach the logon screen (boot spinner forever) and fresh installs fail on AMD Ryzen 5600H host; Linux guest works
メンテナーはふだん 6 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 12/100
- issue の種類
- バグ
- 明瞭さ
- 説明が足りない
- 活発さ
- 活発
- 技術スタック
- c, linux
調査の方向性
No source file or test is named; start from the attached LOG.zip and the VBox.log of a hung boot, comparing the Windows 11 VM settings (EFI/Secure Boot, TPM, PIIX3, SVM) against the working Debian guest. Reproduce on the 7.2.22 host, then narrow whether the hang is in guest execution, AMD-V setup, or Guest Additions. Done means a confirmed root cause or a minimal reproducer maintainers can act on, not a speculative patch.
索引モデルが issue の本文から書いたものです。
説明
Version
7.2.22
Host OS Type
Linux
Host OS name + version
Arch Linux, kernel 7.2.14-zen1 / 7.2.14-arch1 / 7.3.4-zen2
Host Architecture
x86
Guest OS Type
Windows
Guest Architecture
x86
Guest OS name + version
Windows 11 Pro 26H2, build 26300.9974
Component
Unspecified
What happened?
A Windows 11 guest that was installed and working on 11 Nov 2026 (several
successful reboots, Guest Additions 7.2.22 and SQL Server installed) can no
longer complete a boot since 14 Nov 2026. Every cold boot or guest-initiated
reboot stays on the boot logo with the spinning circle indefinitely.
Observations:
- VBox.log shows no error. The guest keeps making progress at first: Guest
Additions drivers load, VBoxService starts about 20 s after power-on, the
shared folder is auto-mounted, and the display driver keeps drawing the
spinner. The logon screen never appears and VBoxTray never starts. - While it is stuck, the VirtualBoxVM process uses little host CPU
(roughly 8-25 % of a 12-thread CPU), so the guest seems to be waiting
rather than working. - Restoring an online snapshot (saved state) works: the Windows desktop is
fully usable until Windows is restarted, then it hangs as above. - The Windows Recovery Environment boots normally in the same VM.
- A fresh Windows 11 install in a brand-new VM (same ISO that worked on
11 Nov) fails with "Windows 11 installation has failed", typically around
78 %. Reproduced in three attempts. - A Debian 13 guest installs and reboots correctly on the same host.
Host: Medion Erazer Deputy P25 laptop, AMD Ryzen 5 5600H (microcode
0x0A500012), 32 GB RAM, NVIDIA RTX 3060 + AMD iGPU, Arch Linux, KDE Plasma
6.8.2, VirtualBox OSE from the Arch repositories (virtualbox 7.2.22-1 and
7.2.22-2, virtualbox-host-dkms), VMs stored on a SATA SSD (ext4).
Guest VM: Windows 11 Pro 26H2 build 26300.9974, 6 vCPUs, 16 GB RAM, EFI with
Secure Boot, TPM 2.0, PIIX3 chipset, AHCI, VBoxSVGA 128 MB without 3D, NAT
(82540EM), default paravirtualization interface.
What was tried, without any effect
- Kernels 7.3.4-zen2, 7.2.14-zen1 and stock 7.2.14-arch1
- VirtualBox packages 7.2.22-2 and 7.2.22-1 (host modules rebuilt each time)
- Full rollback of the root filesystem (Timeshift) to its state before the
14 Nov system update (which had brought kernel 7.3.4, openssl 4.1,
qt6-base, mesa, nvidia 620) - kvm_amd/kvm loaded, and fully blocked (lsmod empty while the VM runs)
- Nested VT-x/AMD-V off, audio disabled, TPM set to None
- Paravirtualization interface None and Legacy
- 4 and 6 vCPUs, 8 and 16 GB RAM, PIIX3 and ICH9 chipsets
- Headless start (no GUI frontend)
- "Use Host I/O Cache" on the SATA controller
- Guest clock set back 5 days with the network adapter disabled
- Guest Additions uninstalled; SQL Server services set to manual
- auto-cpufreq and tuned stopped, UFW disabled
- VirtualBox.xml (global configuration) reset and the VM re-registered
Host checks: no kernel oops or MCE in the journal, SMART clean on the SSD,
8 GB direct write at 244 MB/s without errors, all VM disk images read back
without error.
memtester 16G, 1 loop: all tests ok.
How can we reproduce this?
- Host as described above, VirtualBox 7.2.22.
- Start any Windows 11 26H2 guest from power-off, or restart Windows inside
a restored snapshot. - The guest stays on the boot spinner forever. Installing Windows 11 from
the ISO in a new VM fails during setup instead.
Did you upload all of your necessary log files, screenshots, etc.?
- Yes, I've uploaded all pertinent files to this issue.
- 主要言語
- C
- スター
- 1.4k
- フォーク
- 219
- PR マージ指標
- 30日以内にマージされた PR はありません
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートなし
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
VirtualBox/virtualbox のほかの issue
-
bug
難易度 1/5 1時間未満 初心者へのやさしさ 84/100
VirtualBox/virtualbox#996 ·
メンテナーはふだん 6 日以内に返信
-
enhancement
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
VirtualBox/virtualbox#979 ·
メンテナーはふだん 6 日以内に返信
-
[Bug]: Guest Additions 7.2.20 vboxvideo fails to build on Linux kernel 6.12.113 (drm_fb_helper_restore_fbdev_mode_unlocked: too few arguments)対応中かも @Berbe が 18 日前に担当しました。 オープンbug
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
VirtualBox/virtualbox#918 · コメント 9 件 ·
メンテナーはふだん 6 日以内に返信
-
bug
難易度 4/5 3〜5日 初心者へのやさしさ 25/100
VirtualBox/virtualbox#995 ·
メンテナーはふだん 6 日以内に返信
-
bug
難易度 3/5 1〜2日 初心者へのやさしさ 45/100
VirtualBox/virtualbox#994 ·
メンテナーはふだん 6 日以内に返信
VirtualBox/virtualbox の issue をすべて見る
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 80/100
ESPresense/ESPresense#2680 · コメント 2 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 74/100
ImageMagick/ImageMagick#9134 ·
メンテナーはふだん 1 日以内に返信
-
Builder: a structure opened without calculation data shows the Diffraction (fibre) view by defaultオープンbug
難易度 2/5 1〜3時間 初心者へのやさしさ 65/100
FriendsofECCE/ECCE#1245 · コメント 1 件 ·
-
Arch: ARM/AArch64 Doc
難易度 1/5 1時間未満 初心者へのやさしさ 90/100
RT-Thread/rt-thread#12082 · コメント 1 件 ·
メンテナーはふだん 2 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
apache/nuttx-apps#4108 · コメント 4 件 ·
メンテナーはふだん 1 日以内に返信