After running ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0, nothing happens.

Offen
#391 2 Kommentare 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
3/5
Geschätzter Aufwand
1-2 Tage
Anfängerfreundlichkeit
25/100
Issue-Typ
Bug
Klarheit
Muss geklärt werden
Aktivitätsstatus
Veraltet
Tech-Stack
csharp, docker, unity
Bereich
networking, robotics

Rechercherichtung

Start by reproducing ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0 in the reported Docker setup and compare its output with the documentation's server-start confirmation. Then trace the Unity example publisher's connection to 127.0.0.1:10000; done means the endpoint starts successfully and the Unity client connects without the reported address error.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

I have ROS2 configured on a Docker machine, and when I get up to the step of running this command:
ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0 the console freezes and nothing happens.

I cant seem to quit out of the process either, and I don't the [INFO] [1603488341.950794]: Starting server on 192.168.50.149:10000 confirmation as described in the documentation. When I run unity and the example publisher code, I get this error:

Connection to 127.0.0.1:10000 failed - System.ArgumentException: Addresses 127.0.0.1 (IPv4) and ::0 (IPv6) are unspecified addresses. You cannot use them as target address..

I am assuming I get this error because of the initial failure I described above, although I could be wrong. Any ideas?

Vorherrschende Sprache
C#
Sterne
2.6k
Forks
473
PR-Merge-Kennzahlen
Keine gemergten PRs in 30 T.

Entwicklungsumgebung

  • Kein Dockerfile und keine Docker-Compose-Datei
  • Hat eine Pull-Request-Vorlage
  • Kein Beitragsleitfaden

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus Unity-Technologies/Unity-Robotics-Hub

Alle Issues in Unity-Technologies/Unity-Robotics-Hub

Ähnliche Issues

Weitere Issues zu C#

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.