After running ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0, nothing happens.

未关闭
#391 2 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
3/5
预计耗时
1-2 天
新手友好度
25/100
Issue 类型
缺陷
描述清晰度
需要澄清
活跃度
停滞
技术栈
csharp, docker, unity

调研方向

Start by reproducing ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0 in the reported Docker setup and compare its output with the documentation's server-start confirmation. Then trace the Unity example publisher's connection to 127.0.0.1:10000; done means the endpoint starts successfully and the Unity client connects without the reported address error.

由索引模型根据 Issue 内容生成。

描述

I have ROS2 configured on a Docker machine, and when I get up to the step of running this command:
ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0 the console freezes and nothing happens.

I cant seem to quit out of the process either, and I don't the [INFO] [1603488341.950794]: Starting server on 192.168.50.149:10000 confirmation as described in the documentation. When I run unity and the example publisher code, I get this error:

Connection to 127.0.0.1:10000 failed - System.ArgumentException: Addresses 127.0.0.1 (IPv4) and ::0 (IPv6) are unspecified addresses. You cannot use them as target address..

I am assuming I get this error because of the initial failure I described above, although I could be wrong. Any ideas?

主要语言
C#
星标
2.6k
派生
473
PR 合并指标
30 天内没有已合并 PR

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 有 Pull Request 模板
  • 没有贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

Unity-Technologies/Unity-Robotics-Hub 的其他 Issue

查看 Unity-Technologies/Unity-Robotics-Hub 的全部 Issue

相似的 Issue

更多 C# Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。