[Bug] [libc] settimeofday 在 time64/long32 配置下窄化校验,错误拒绝有效时间戳

Offen
#11,922 4 Kommentare 0 Reaktionen 1 zugewiesene Person Auf GitHub ansehen

Maintainer antworten meist innerhalb von 2 Tagen

@Yunlk arbeitet bereits daran.

Seit 24.10.2026.

Bewertung

Schwierigkeit
3/5
Geschätzter Aufwand
1-2 Tage
Anfängerfreundlichkeit
72/100
Issue-Typ
Bug
Klarheit
Klar beschrieben
Aktivitätsstatus
Aktiv
Tech-Stack
c

Rechercherichtung

Read components/libc/compilers/common/ctime.c, especially settimeofday() around lines 559–599, and inspect the field types used by its validation and the RTC control calls. Reproduce the narrowing behavior with the stated time64/long32 ARM configuration or a focused test. Done when a valid positive timestamp such as 2208988800 passes entry validation and reaches the RTC driver; hardware support determines whether the driver accepts it.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

in progress
RT-Thread Version

master, commit a59e72fb5c2f272761a2813fc9bd9fe18eb29d7d.

Affected area

libc / RTC, components/libc/compilers/common/ctime.c, settimeofday().

Hardware / Architecture / Toolchain

32 位 ARM ABI:time_t 为 64 位有符号类型,long 为 32 位。工具链为 GNU Arm Embedded Toolchain 10.3-2021.10(newlib)。已通过隔离的 ARM 编译验证类型大小及窄化转换行为;尚未验证已部署固件,不代表已经完成实机测试。

问题描述 / Describe the bug

settimeofday() 在验证时间戳时先强制转换为 long:

if (tv != RT_NULL && (long)tv->tv_usec >= 0 && (long)tv->tv_sec >= 0)

在 time64/long32 配置下,有效的正时间戳可能因此变成负数,在调用 RTC 驱动之前就返回 -1、设置 errno=EINVAL。

固定版本源码 L559–599

复现 / Reproduction

在上述 ABI 下启用 RT_USING_RTC,并提供能接受该时间的 RTC 设备:

#include <time.h>
#include <sys/time.h>
#include <errno.h>

_Static_assert(sizeof(time_t) == 8, "requires time64");
_Static_assert(sizeof(long) == 4, "requires long32");

struct timeval tv = {0};
tv.tv_sec = (time_t)2208988800LL; /* 2040-01-01 00:00:00 UTC */
tv.tv_usec = 0;
int rc = settimeofday(&tv, NULL);

预期:该有效正时间应通过入口校验,由 RTC 驱动决定是否支持设置。

源码推导结果:测试所用 ARM GCC 的 (long)2208988800LL 为 -2085978496,入口条件为假,因此两个 RTC control 操作均不会被调用,返回 -1/EINVAL。

验证边界:已隔离编译确认类型大小及强转后的判断结果,尚未在目标板上端到端执行上面的调用。超范围有符号转换的结果取决于实现;这里的数值针对已验证的 GCC 行为。并非所有 2038 年之后的时间都会被拒绝:在该行为下首个拒绝区间为秒值 2147483648..4294967295。

Suggested direction

避免为了检查符号而将 tv_sec 窄化为 long,按字段自身的类型进行范围验证。该问题不限于 picolibc,time64/long32 的 newlib 配置同样可能受影响。它与 time32 本身的表示范围限制是两个独立问题。

引入提交和版本 / Regression history
  • 引入该窄化检查的提交:92859cc79e,2023-08-07,[libc][time] silence the incorrect type warning。
  • 该提交将原先直接比较字段的表达式改成 (long) 强转;首个包含它的正式 release 为 v5.0.2。
  • 这是条件性回归:只有字段类型与 long 的宽度/表示范围不匹配并输入对应时间戳时才暴露,并非从该版本开始所有平台都不能设置时间。
其他实现参考 / Comparison

这里只比较有效正时间戳的传递方式,不主张所有 OS 的设置时间权限、负值策略或硬件支持范围相同。

Vorherrschende Sprache
C
Sterne
12.4k
Forks
5.5k
Ø Merge
3 T. 7 Std.
Gemergte PRs (30 T.)
79

Entwicklungsumgebung

In Codespaces öffnen

Startet den Dev-Container des Projekts im Browser, mit Ihrem eigenen GitHub-Konto.

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus RT-Thread/rt-thread

Alle Issues in RT-Thread/rt-thread

Ähnliche Issues

Weitere Issues zu C

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.