[Bug] [libc] settimeofday 在 time64/long32 配置下窄化校验,错误拒绝有效时间戳

Đang mở
#11,922 4 bình luận 0 reaction 1 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 2 ngày

@Yunlk đang làm issue này rồi.

Từ ngày 24/10/2026.

Đánh giá

Độ khó
3/5
Thời gian dự kiến
1-2 ngày
Mức phù hợp với người mới
72/100
Loại issue
Lỗi
Độ rõ ràng
Đặc tả rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
c
Lĩnh vực
backend, embedded-iot

Hướng nghiên cứu

Read components/libc/compilers/common/ctime.c, especially settimeofday() around lines 559–599, and inspect the field types used by its validation and the RTC control calls. Reproduce the narrowing behavior with the stated time64/long32 ARM configuration or a focused test. Done when a valid positive timestamp such as 2208988800 passes entry validation and reaches the RTC driver; hardware support determines whether the driver accepts it.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

in progress
RT-Thread Version

master, commit a59e72fb5c2f272761a2813fc9bd9fe18eb29d7d.

Affected area

libc / RTC, components/libc/compilers/common/ctime.c, settimeofday().

Hardware / Architecture / Toolchain

32 位 ARM ABI:time_t 为 64 位有符号类型,long 为 32 位。工具链为 GNU Arm Embedded Toolchain 10.3-2021.10(newlib)。已通过隔离的 ARM 编译验证类型大小及窄化转换行为;尚未验证已部署固件,不代表已经完成实机测试。

问题描述 / Describe the bug

settimeofday() 在验证时间戳时先强制转换为 long:

if (tv != RT_NULL && (long)tv->tv_usec >= 0 && (long)tv->tv_sec >= 0)

在 time64/long32 配置下,有效的正时间戳可能因此变成负数,在调用 RTC 驱动之前就返回 -1、设置 errno=EINVAL。

固定版本源码 L559–599

复现 / Reproduction

在上述 ABI 下启用 RT_USING_RTC,并提供能接受该时间的 RTC 设备:

#include <time.h>
#include <sys/time.h>
#include <errno.h>

_Static_assert(sizeof(time_t) == 8, "requires time64");
_Static_assert(sizeof(long) == 4, "requires long32");

struct timeval tv = {0};
tv.tv_sec = (time_t)2208988800LL; /* 2040-01-01 00:00:00 UTC */
tv.tv_usec = 0;
int rc = settimeofday(&tv, NULL);

预期:该有效正时间应通过入口校验,由 RTC 驱动决定是否支持设置。

源码推导结果:测试所用 ARM GCC 的 (long)2208988800LL 为 -2085978496,入口条件为假,因此两个 RTC control 操作均不会被调用,返回 -1/EINVAL。

验证边界:已隔离编译确认类型大小及强转后的判断结果,尚未在目标板上端到端执行上面的调用。超范围有符号转换的结果取决于实现;这里的数值针对已验证的 GCC 行为。并非所有 2038 年之后的时间都会被拒绝:在该行为下首个拒绝区间为秒值 2147483648..4294967295。

Suggested direction

避免为了检查符号而将 tv_sec 窄化为 long,按字段自身的类型进行范围验证。该问题不限于 picolibc,time64/long32 的 newlib 配置同样可能受影响。它与 time32 本身的表示范围限制是两个独立问题。

引入提交和版本 / Regression history
  • 引入该窄化检查的提交:92859cc79e,2023-08-07,[libc][time] silence the incorrect type warning。
  • 该提交将原先直接比较字段的表达式改成 (long) 强转;首个包含它的正式 release 为 v5.0.2。
  • 这是条件性回归:只有字段类型与 long 的宽度/表示范围不匹配并输入对应时间戳时才暴露,并非从该版本开始所有平台都不能设置时间。
其他实现参考 / Comparison

这里只比较有效正时间戳的传递方式,不主张所有 OS 的设置时间权限、负值策略或硬件支持范围相同。

Ngôn ngữ chính
C
Star
12.4k
Fork
5.5k
Merge trung bình
3 ngày 7 giờ
Pull request đã merge (30 ngày)
79

Chuẩn bị môi trường

Mở trong Codespaces

Khởi chạy dev container của dự án ngay trên trình duyệt, bằng tài khoản GitHub của bạn.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của RT-Thread/rt-thread

Tất cả issue của RT-Thread/rt-thread

Issue tương tự

Thêm issue về C

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.