[Release Tracking] system-config-printer 1.5.19 milestone
Maintainers usually reply within 2 days
@alexpevzner is already working on this.
Since Nov 3, 2026.
Assessment
This issue has not been assessed yet.
Description
Tracking issue for the 1.5.19 release.
This issue tracks the main changes since 1.5.18, remaining release work, and will serve as the basis for the 1.5.19 release notes. It can be closed once 1.5.19 is released.
Done
New Printer wizard
- Improved printer discovery and ordering, including DNS-SD and IPP-over-USB devices.
- Hide already configured printers from the list of discovered devices
- Multi-protocol printers are listed as a single device with multiple connection options, not as multiple devices, as it was before
- IPP-over-USB devices are shown as local devices, not network devices
- Improved driver selection and display.
- Validate driverless PPDs before recommending them, with manual selection as fallback.
- Pre-select the detected manufacturer for LPD/LPR printers.
- Improved Duplicate Printer handling.
Stability and responsiveness
- Fixed GTK crashes and UI freezes during printer and driver operations.
- Moved blocking
getServerPPD()work away from the GTK main thread. - Fixed PackageKit D-Bus lifecycle handling.
- Fixed freezes in the New Printer wizard.
- Fixed a Printer Properties crash caused by
Noneoption values.
UI and cleanup
- Improved the appearance of read-only/non-editable fields.
- Removed the unnecessary Cairo dependency from the spinner.
Other upstream fixes
- Fixed Python 3.12 build issues.
- Fixed
debugprint()handling. - Fixed a
jobviewer.pyTypeError. - Improved device exit handling.
- Updated translations.
Planned
- Integrate and test the discovery-first New Printer UI (#490).
- Run a regression pass of the New Printer wizard covering USB, IPP/IPP-over-USB, DNS-SD, LPD/LPR, SMB and driverless printers.
- Address any remaining blocking operations found during testing.
- Complete translation updates.
- Update the version to 1.5.19.
- Finalize release notes, create the 1.5.19 tag and publish the release.
Future work
CUPS 3.x modernization and compatibility work will continue separately from the 1.5.19 release and is not considered a blocker for this milestone.
Release checklist
- Release-targeted changes merged
- New Printer wizard regression testing completed
- Remaining blocking operations reviewed
- Translations updated
- Release notes finalized
- Version bumped to 1.5.19
- 1.5.19 tagged and released
Close this issue when system-config-printer 1.5.19 is released.
- Dominant language
- Python
- Stars
- 209
- Forks
- 111
- Avg merge
- 2d 3h
- Merged PRs (30d)
- 8
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from OpenPrinting/system-config-printer
-
Job viewer shows "Printer error" for cups-waiting-for-job-completedPossibly taken @RonitMehta08 claimed this 5 days ago. Open
Difficulty 2/5 1-3 hours Newbie friendliness 86/100
OpenPrinting/system-config-printer#494 ·
Maintainers usually reply within 2 days
-
Difficulty 4/5 3-5 days Newbie friendliness 44/100
OpenPrinting/system-config-printer#499 ·
Maintainers usually reply within 2 days
-
ScannerOpen
Difficulty 3/5 1-2 days Newbie friendliness 25/100
OpenPrinting/system-config-printer#407 · 1 comment ·
Maintainers usually reply within 2 days
-
Doesn't run with PYTHONSAFEPATH enabledPossibly taken @xovishnukosuri claimed this 250 days ago. Open
Difficulty 2/5 1-3 hours Newbie friendliness 58/100
OpenPrinting/system-config-printer#387 ·
Maintainers usually reply within 2 days
-
system-config-printer can't open printer properties because job-cancel-after value is NonePossibly taken @xovishnukosuri claimed this 250 days ago. Open
Difficulty 2/5 1-3 hours Newbie friendliness 55/100
OpenPrinting/system-config-printer#385 · 1 comment ·
Maintainers usually reply within 2 days
All issues in OpenPrinting/system-config-printer
Similar issues
-
ready-for-agent
Difficulty 1/5 1-3 hours Newbie friendliness 79/100
gregwebs/agent-vm-images#216 ·
Maintainers usually reply within 1 day
-
Layout accepts a step threshold of 0 or less, then in-toto-verify crashes with StopIterationPossibly taken @BahaaMattar claimed this today. Open
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
gcivil-nyu-org/team5-mon-fall26#145 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
gcivil-nyu-org/team3-mon-fall26#156 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
antlr/grammars-v4#5220 ·
Maintainers usually reply within 1 day