Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

Qualia Display Jitter rectangle (320x960) HD458002C40

未关闭
#10,903 11 条评论 0 个 reaction 已指派 2 人 在 GitHub 查看

维护者通常 1 天内回复

@tannewt 已经在做这个了。

开始于 2026年3月30日。

评估

这个 Issue 还没有评估数据。

描述

displayio

Board: Adafruit Qualia ESP32-S3 for TTL RGB-666 Displays (adafruit_qualia_s3_rgb666)
Display: HD458002C40 4.58" 320x960 Rectangle Bar RGB TTL TFT (PID 5805)
CP version: 10.1.4

Bug

Intermittent single-frame jumps visible on DotClockFramebuffer-driven display when moving a displayio.Group. Occurs even with WiFi disabled, USB disconnected, and gc.collect() in loop. Severity increases significantly with WiFi on or CIRCUITPY_WEB_API enabled.

Repro

Minimal reproducible example by forum user blakebr (credited):
Forums – Flicker with Qualia RGB666 and 320x960 Bar

Key observations from extended testing:

  • Jitter spikes are consistently 2× the normal loop time (0.125s vs 0.0625s)
  • No correlation with GC events, power supply, or flex cable
  • Identical hsync/vsync timings in CP and Arduino GFX; Arduino shows no jitter
  • Pixel clock difference: CP uses 16 MHz; Arduino defaults to ~12 MHz — changing CP frequency did not resolve the issue
  • UF2 rainbow demo (earlier IDF) shows no flicker; CP 10.1.4 does

Related

  • adafruit/Adafruit_CircuitPython_Qualia PR #17 (timing fix for bar320x960.py, merged) — did not resolve jitter
  • Arduino ESP32 BSP 3.1.2 = no flicker; 3.1.3+ introduces it (suspected IDF5 timing change)
  • Confirmed by a second user (PlatformIO + LVGL + Arduino GFX stack): same thread
  • Similar: #10690
主要语言
C
星标
4.6k
派生
1.4k
平均合并
1 天 8 小时
30 天内合并 PR
155

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

adafruit/circuitpython 的其他 Issue

查看 adafruit/circuitpython 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。