Steam Machine gets stuck on black screen after SteamOS update – blue LEDs pulse but system won't boot
还没有人认领这个 Issue。
评估
- 难度
- 4/5
- 预计耗时
- 3-5 天
- 新手友好度
- 30/100
- Issue 类型
- 缺陷
- 描述清晰度
- 基本清楚
- 活跃度
- 活跃
- 技术栈
- linux
调研方向
Start by comparing the working Neptune 618/EFI-A installation with the failing Neptune 72/EFI-B installation, using the available system logs and boot records to identify where startup stops. Check the SteamOS update, AMD graphics/DRM, kernel, firmware, and bootloader changes associated with the regression, and look for any existing SteamOS issue tracking the same rollback-to-Neptune-618 behavior. The issue is done when there is a confirmed cause or tested fix, or a documented workaround that avoids reinstalling SteamOS or erasing user data.
由索引模型根据 Issue 内容生成。
描述
Your system information
- Device: Valve Steam Machine (2026)
- Steam client version: Not yet confirmed
- SteamOS version: 3.8.28, build 20260922.1 (currently using rollback)
- Working kernel: Neptune 618
- Problematic kernel: Neptune 72
- Opted into Steam client beta?: Not confirmed
- Opted into SteamOS beta?: Not confirmed
- Have you checked for updates in Settings > System?: Yes. Updates are available but not installed.
Please describe your issue in as much detail as possible
After updating SteamOS, my Steam Machine developed an intermittent startup problem.
The updated version successfully booted at least once and worked normally. However, after restarting, the machine began getting stuck during startup with a completely black screen.
When this happens:
- The blue LEDs fade in and out continuously.
- The fans continue spinning.
- The monitor receives no picture.
- My Steam Controller connects, but pressing the Steam button does nothing.
- Pressing the power button once has no effect.
- Holding the power button forces the machine to shut down.
- Turning it back on results in the same problem.
I have tested two different monitors and both HDMI and DisplayPort, with the same result.
Rolling back to the previous SteamOS version restores normal operation.
The working installation uses the Neptune 618 kernel on EFI-A. The problematic updated installation used Neptune 72 on EFI-B.
I have checked the available system logs but haven't found an obvious AMD graphics or DRM error.
I would like to know whether this is a known SteamOS update, kernel, firmware or bootloader issue and whether there is a fix that doesn't require reinstalling SteamOS or wiping my data.
Steps for reproducing this issue
- Boot the Steam Machine using the updated SteamOS version (Neptune 72).
- Use the system normally.
- Restart the machine.
- The machine gets stuck with pulsing blue LEDs, spinning fans and a completely black screen.
The issue has occurred repeatedly. Rolling back to Neptune 618 restores normal startup.
- 主要语言
- 没有语言数据
- 星标
- 2.7k
- 派生
- 89
- PR 合并指标
- 30 天内没有已合并 PR
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南，环境需要你自己搭建：先看它的 README，通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
ValveSoftware/SteamOS 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 70/100
ValveSoftware/SteamOS#3037 ·
-
难度 2/5 1-3 小时 新手友好度 68/100
ValveSoftware/SteamOS#2983 ·
-
难度 2/5 1-3 小时 新手友好度 72/100
ValveSoftware/SteamOS#2927 ·
-
难度 2/5 1-3 小时 新手友好度 72/100
ValveSoftware/SteamOS#2875 · 1 条评论 ·
-
steam-short-session-tracker: incorrect registry backup path resets settings during automatic repair未关闭
难度 2/5 1-3 小时 新手友好度 80/100
ValveSoftware/SteamOS#2829 ·
查看 ValveSoftware/SteamOS 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 85/100
-
难度 2/5 1-3 小时 新手友好度 74/100
维护者通常 1 天内回复
-
bot-found bug priority: P3
难度 2/5 1-3 小时 新手友好度 78/100
madenvel/KalinkaPlayer#555 ·
-
难度 2/5 1-3 小时 新手友好度 72/100
GlenMeehan/CadenzaOS#48 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 78/100
SerenityOS/serenity#27169 ·
维护者通常 1 天内回复