Efuse programming: port the vendor PG-packet write path (append-only logical-map updates)

未关闭
#285 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
5/5
预计耗时
一周以上
新手友好度
12/100
Issue 类型
功能
描述清晰度
描述清楚
活跃度
冷清
技术栈
c
领域
embedded-iot

调研方向

Start with the existing read power sequence in src/jaguar1/EepromManager.cpp and the 8822E OTP path in src/jaguar3/HalJaguar3.cpp; compare them with the vendor write primitives and packet format. Implement the generation-neutral encoder in src/ with pseudo-test coverage before attempting hardware-specific writes. Done means safe dry-run and space accounting, verified packet writes with recovery, and family-specific hardware validation; burns require sacrificial adapters.

由索引模型根据 Issue 内容生成。

描述

enhancement

Motivation

The vendor drivers ship a full efuse-programming stack (rtw_efuse_map_write → Efuse_PgPacketWrite → efuse_OneByteWrite, exposed as the MP-mode iwpriv efuse_set wmap,...). Devourer is read-only. Mirroring the write path lets us permanently fix MAC/board-option/ID fields on adapters — including resurrecting corrupt-efuse units — without carrying a vendor kernel module around.

Prerequisite: #284 (logical-map override). Its dump + patch grammar is the authoring format, and the RAM-only override is the mandatory pre-burn validation step: dump → edit → run with override → validate on-air → burn.

Write model (mirror of rtw_efuse_map_write)

Efuse is one-way: blank bytes read 0xFF, programming only pulls bits toward 0, nothing is ever erased. "Overwrite" = diff the desired logical map against the current one, encode only the changed 2-byte word-units as new PG packets, append them at the current end of the physical chain (Efuse_GetCurrentSize); later entries shadow earlier ones at materialization time.

Delivery: a dedicated efusetool example (dump / diff / dry-run / burn) — not wired into the demos. Dry-run is the default and prints the exact packet list + physical byte cost vs. remaining budget; burning requires an explicit flag, and MAC/VID/PID regions a second one.

Implementation details / hazards

  1. The write-mode power sequence is not the read one. Devourer's EfusePowerSwitch8812A (src/jaguar1/EepromManager.cpp:1322) only implements the read bracket; the vendor write path additionally raises programming voltage (LDO bits + REG_EFUSE_BURN_GNT = 0x69, the bWrite branch). Getting it wrong does not error — it produces silent partial burns. Port verbatim per chip.
  2. Per-generation write primitives diverge. Jaguar1: one-byte protocol on EFUSE_CTRL 0x0030. Jaguar2/3 vendor writes go through HalMAC (halmac_write_efuse), and our HalMAC port is read-only — decide between porting the halmac write entry points vs. raw-register writes with re-derived brackets. 8822E is a third primitive entirely: OTP power-cut + burst bracket, V1 register layout (RDY at bit 29, 11-bit address field) (src/jaguar3/HalJaguar3.cpp:522-573).
  3. 8822E burns must happen pre-InitWrite — the existing cache comment records that post-bring-up OTP access is unreliable (TX/coex interference). efusetool on Jaguar3-E is a dedicated cold session, never a live-device operation.
  4. Space accounting is chip-specific and unforgiving. Extended 2-byte headers past section 16 (Jaguar1/2), packed 2-byte headers everywhere on 8822E, and the vendor reserves an OOB-protect tail (EFUSE_OOB_PROTECT_BYTES) that must never be consumed. Overrun = chain tail lands in reserved space → undefined parse on next boot.
  5. badworden recovery is mandatory. Vendor verifies each word post-burn and re-programs failed words in a fresh packet; without it a marginal cell silently corrupts the value and wastes the space. Read-back verify + retry from day one.
  6. Interrupted-burn risk is real on USB. The header must precede data (the chain is positional), so an unplug mid-packet leaves a header pointing at 0xFF data and everything after may misparse. No clean mitigation exists: keep burns single-packet-small, re-parse and verify the full chain after each packet, document "don't burn through a flaky hub".
  7. Port the vendor efuse masks (per-chip protected-byte arrays covering calibration: xtal, thermal baseline, TX-power PG). Without them one typo'd offset permanently spends spare space shadowing a calibration byte.
  8. Testability without sacrificing hardware: port the vendor's bPseudoTest idea as a simulated efuse backend so diff→packet→space→extended-header logic runs as headless ctest selftests. Hardware validation still needs a sacrificial adapter — every burn, including successful tests, permanently spends bytes; budget the test plan honestly (a handful of burns per adapter lifetime).
  9. Shared logic placement: the diff→PG-packet encoder is generation-neutral pure code → src/ next to PhyTableLoader; only the byte-read/byte-write/power-bracket primitives live per-HAL.

Scope exclusions

  • BT efuse bank (8821A) — out.
  • Kestrel families — out.
  • PCIe 8821CE: likely works through RtlAdapter, but the is_usb() power-seq gates need checking before claiming it.

Suggested milestones

  1. Pseudo-test backend + PG-packet encoder + space accounting in src/, headless selftests (incl. extended-header and 8822E packed-header encodes).
  2. Jaguar1 write primitive (power bracket + one-byte write + read-back verify), validated on a sacrificial 8812AU: burn one scratch logical byte, cold-cycle, confirm shadowing.
  3. efusetool UX: dump / diff vs. #284 patch file / dry-run / burn, masks enforced.
  4. Jaguar2, then Jaguar3-8822C, then 8822E primitives — each gated on having a sacrificial adapter of that family.
主要语言
C
星标
56
派生
29
平均合并
3 小时 43 分钟
30 天内合并 PR
75

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

OpenIPC/devourer 的其他 Issue

查看 OpenIPC/devourer 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。