Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

Implement the door lock command

未关闭
#37 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
5/5
预计耗时
一周以上
新手友好度
35/100
Issue 类型
功能
描述清晰度
基本清楚
活跃度
活跃
技术栈
rust
领域
embedded-iot

调研方向

Start with DoorLockCommand in cars/egmp/src/lib.rs and the existing signal definitions in contracts/dbc/m-can.dbc. The issue says to capture the car's frames with SavvyCAN, add them to the DBC, then send them from firmware; first check the linked firmware#22 work and the read-only and car checks. Done means lock and unlock frames are captured, documented in the DBC, and sent only when both stated checks pass.

由索引模型根据 Issue 内容生成。

描述

e-gmp

Lock and unlock the doors (DoorLockCommand). It currently returns "Not implemented" (cars/egmp/src/lib.rs).

Capture the frames the car sends when this is done from the car itself (SavvyCAN logger, firmware#22), add them to dbc/m-can.dbc in contracts, then send them from the firmware.

Only send while read-only is off and the car identity check passes.

主要语言
Rust
星标
1
派生
0
平均合并
10 小时 56 分钟
30 天内合并 PR
15

环境准备

在 Codespaces 中打开

在浏览器里用你自己的 GitHub 账号启动这个项目的开发容器。

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 没有贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

OpenCarControls/firmware 的其他 Issue

查看 OpenCarControls/firmware 的全部 Issue

相似的 Issue

更多 Rust Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。