[TensorRT 11.x][Blackwell SM120] Internal DDS compiler assertion when IPluginV3 scalar output controls dynamic ONNX Slice
维护者通常 6 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 5/5
- 预计耗时
- 一周以上
- 新手友好度
- 5/100
- Issue 类型
- 缺陷
- 描述清晰度
- 基本清楚
- 活跃度
- 活跃
调研方向
The failing assertion is in convertExplicitDDSPluginToImplicit.cpp at line 149, inside the TensorRT myelin optimizer, and the report reproduces it only with a proprietary IPluginV3 plugin (SparseConvolution) feeding two dynamic ONNX Slice ops. Reproducing needs a Blackwell SM120 GPU, TensorRT 11.x, and a substitute plugin that declares a scalar INT32 output without calling IExprBuilder::declareSizeTensor(). Done would mean understanding why the DDS output and size-tensor bookkeeping disagree, which is maintainer-level work on the closed-source optimizer.
由索引模型根据 Issue 内容生成。
描述
Description
We are experiencing what seems an architecture and version-dependent TensorRT engine compilation failure involving a custom IPluginV3 and downstream data-dependent ONNX Slice operations.
The compilation from onnx to engine is done with trtexec.
The behavior differs depending on the GPU architecture and TensorRT version:
- TensorRT 10.14: Successfully builds the engine on Blackwell SM120.
- TensorRT 11.1 and 11.4: Fail during engine compilation on Blackwell SM120.
- TensorRT 11.1 and 11.4: Successfully build the same network on Ampere SM86 and Ada SM89 GPUs (only tested with 11.1).
The original model and custom plugin implementation are proprietary and cannot be shared.
Environment
| GPU | Compute capability | TensorRT 10.14 | TensorRT 11.1 | TensorRT 11.4 |
|---|---|---|---|---|
| NVIDIA RTX A3000 Laptop | SM86 | PASS | PASS | PASS |
| NVIDIA RTX 4090 | SM89 | PASS | PASS | NOT TESTED |
| NVIDIA RTX PRO 4000 Blackwell SFF | SM120 | PASS | FAIL | FAIL |
Additional environment information:
- ONNX opset: 17
- Custom plugin interface: IPluginV3
- Engine building: trtexec
- Plugin loading: --staticPlugins
- Optimization profile: dynamic input dimensions
Note that in 10.14 we were using implicit trtexec fp32 -> fp16 conversion
Exact Error
The engine build fails with the following internal assertion:
[E] Error[2]:
[convertExplicitDDSPluginToImplicit.cpp::
convertExplicitDDSPluginToImplicit::149]
Error Code 2: Internal Error
Assertion
nodeIdxToDDSOutputIndices.count(i) ==
nodeIdxToSizeTensors.contains(i)
failed.
In convertExplicitDDSPluginToImplicit at
/_src/optimizer/myelin/rewrite/
convertExplicitDDSPluginToImplicit.cpp:149
The error occurs during engine construction, not during inference.
Steps To Reproduce
The relevant graph section consists of a custom IPluginV3 (SparseConvolution) producing fixed-capacity tensors and a scalar indicating how many entries are valid.
The plugin exposes three outputs:
| Output | Data type | Shape | Description |
|---|---|---|---|
| 0 | FP16 | [CAPACITY, CHANNELS] |
Feature data |
| 1 | INT32 | [CAPACITY, 4] |
Associated indices |
| 2 | INT32 | [] |
Runtime number of valid entries |
The scalar is subsequently used to determine the output dimension of two ONNX Slice operations.
Conceptually, the operation is equivalent to:
valid_features = features[:valid_count]
valid_indices = indices[:valid_count]
The count is a runtime value produced by the custom plugin.
The plugin currently declares the count as an ordinary INT32 scalar output and does not explicitly call IExprBuilder::declareSizeTensor().
We would like to confirm whether this pattern is supported by TensorRT 11.x. or a regression on TensorRT 11. on Blackwell path
- 主要语言
- C++
- 星标
- 13.5k
- 派生
- 2.4k
- 平均合并
- 6 天 21 小时
- 30 天内合并 PR
- 3
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 没有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
NVIDIA/TensorRT 的其他 Issue
-
Module:Polygraphy
难度 2/5 1-3 小时 新手友好度 77/100
维护者通常 6 天内回复
-
Polygraphy NumPy Top-K sorts unsigned and minimum signed integers incorrectly可能已有人在做 @0z5a 于 16 天前认领。 未关闭Module:Polygraphy
难度 2/5 1-3 小时 新手友好度 72/100
维护者通常 6 天内回复
-
Polygraphy INT32 comparison can overflow and falsely pass at zero tolerance可能已有人在做 @0z5a 于 16 天前认领。 未关闭Module:Polygraphy
难度 2/5 1-3 小时 新手友好度 72/100
维护者通常 6 天内回复
-
onnx-graphsurgeon: Graph.toposort() hits RecursionError when a graph has a local function and an If/Loop node可能已有人在做 @gabortar 于 39 天前认领。 未关闭Module:GraphSurgeon
难度 2/5 1-3 小时 新手友好度 82/100
维护者通常 6 天内回复
-
Polygraphy parse_meta accepts a shape with a missing bracket可能已有人在做 @SashaMIT 于 51 天前认领。 未关闭Module:Polygraphy
难度 2/5 1-3 小时 新手友好度 86/100
维护者通常 6 天内回复
相似的 Issue
-
难度 1/5 1 小时以内 新手友好度 91/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 69/100
maplibre/maplibre-native#5072 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 79/100
tenstorrent/tt-umd#4017 ·
维护者通常 3 天内回复
-
difficulty:easy func:gui prio:low type:bug
难度 2/5 1-3 小时 新手友好度 72/100
NatronGitHub/Natron#1538 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 72/100
hyprwm/hyprsunset#103 · 1 条评论 ·