开放
[BUG] G28: Axes move at slow rate after homing at (0,0) with ABL
Bug: Potential ?C: MotionNeeds: Workgood first issue
2 条评论0 个反应0 负责人
仓库议题
MarlinFirmware/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
议题
开放
[FR] Runtime adjustable machine travel limits
F: CalibrationT: Feature Requestgood first issue
21 条评论2 个反应0 负责人
开放
[FR] button multiplexing
C: User InterfaceT: Feature Requestgood first issue
6 条评论2 个反应0 负责人
开放
[BUG] LASER_FEATURE inhibits CONTROLLERFAN_SPEED_ACTIVE setting
Bug: Confirmed !help wanted
29 条评论0 个反应0 负责人
开放
[FR] Lerdge K add support to second Z driver as EX-AXIS
C: Boards/PinsT: Feature Requesthelp wanted
5 条评论0 个反应0 负责人
开放
[FR] Filament Change for DGUS / DWIN
C: LCD & ControllersT: Feature Requesthelp wanted
2 条评论0 个反应0 负责人
开放
[FR] TMC5161 stepper driver support
F: TrinamicT: Feature Requesthelp wanted
84 条评论1 个反应0 负责人
开放
[FR] Explicitly switch stealthChop / spreadCycle per move (i.e., anticipate need for "Hybrid" switching)
F: TrinamicT: Feature Requesthelp wanted
15 条评论0 个反应0 负责人
开放
[FR] Dual zone heated bed support
C: TemperaturesT: Feature Requestgood first issuehelp wanted
26 条评论1 个反应0 负责人