podd-slot-install.sh flips the boot pointer without verifying the written slot actually contains a kernel

未关闭 适合新手
#51 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
70/100
Issue 类型
缺陷
描述清晰度
描述清楚
活跃度
冷清
技术栈
linux, shell
领域
devops

调研方向

从 install/podd-slot-install.sh 第 160–192 行附近开始,追踪 $MNT 的设置方式以及 DTB 路径的选择方式。解压后,在启动指针更改之前,验证已挂载的槽位中存在 /boot/Image.gz 和预期的 DTB。完成标准是:缺少内核或 DTB 时,安装会在指针切换前停止。

由索引模型根据 Issue 内容生成。

描述

bug

install/podd-slot-install.sh mkfs's the inactive slot, tar -xzf the rootfs into it (line 161), then flips mmcpart and reboots (lines 170-192) — but it never checks that the extracted tree actually contains /boot/Image.gz + the DTB, even though the log line at 160 says it 'must include' them. A truncated, wrong, or kernel-less tarball would produce a non-booting slot, and the only safety net is the assumed stock U-Boot bootcount/altbootcmd auto-revert (which the script arms via ustate=1 but never confirms is present in this unit's env). If that rollback machinery is absent or differs, the Pod is left booting a dead slot and needs serial-U-Boot recovery. Add a post-extract sanity check (stat /boot/Image.gz and the DTB in $MNT) before flipping the pointer.


Filed from a repo-wide code audit (working tree at bcad746).

主要语言
Rust
星标
0
派生
0
PR 合并指标
30 天内没有已合并 PR

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

GoogleBot42/podd 的其他 Issue

查看 GoogleBot42/podd 的全部 Issue

相似的 Issue

更多 Rust Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。