DOC: Knowledge base gives the wrong reason for the requireArraysInMemory call order
维护者通常 6 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 2/5
- 预计耗时
- 1-3 小时
- 新手友好度
- 74/100
- Issue 类型
- 文档
- 描述清晰度
- 描述清楚
- 活跃度
- 活跃
- 技术栈
- cpp
调研方向
从 docs/Coding_Knowledge_Base.md 第1097-1100行的 requireArraysInMemory 条目开始,然后将其与 IParallelAlgorithm.cpp 第82-91行以及 IParallelAlgorithm.hpp 第43-44行进行比较,以确认每次调用都保持禁用状态。重写该条目,说明这一原因,并指出在 require 调用之前应先调用 setParallelizationEnabled(true)。当条目与代码及头文件注释一致时即完成。
由索引模型根据 Issue 内容生成。
描述
Summary
The rule for requireArraysInMemory() in the coding knowledge base gives the wrong reason for its call order. The text should describe what the code does.
What the knowledge base says. docs/Coding_Knowledge_Base.md lines 1097-1100: "Each call replaces the previous decision, so call it once with all arrays, and call setParallelizationEnabled(false) after it, not before."
How it works now. IParallelAlgorithm.cpp lines 82-91 combines each call with the current state:
setParallelizationEnabled(getParallelizationEnabled() && CheckArraysInMemory(arrays));
So a call never re-enables parallel work. It only keeps or sets the disabled state. The header says the same thing (IParallelAlgorithm.hpp lines 43-44): "Each call preserves a disabled state. Call setParallelizationEnabled(true) to reset the state in a multicore build."
Why it matters. The advice itself is still safe, but the stated reason is wrong. A developer who believes that a later call replaces an earlier one may split the arrays across several calls and expect only the last to count, or may call setParallelizationEnabled(true) after the require calls and silently turn the out-of-core gate off.
Where it applies. Only the knowledge-base entry. The request is to state the real rule: each call keeps a disabled state, and setParallelizationEnabled(true) resets it, so call it before the require calls, never after.
Found during the review of the #1908 batch 4 changes (FeatureFaceCurvature out-of-core gate). No open issue covered it.
- 主要语言
- C++
- 星标
- 18
- 派生
- 15
- 平均合并
- 4 天 23 小时
- 30 天内合并 PR
- 42
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
BlueQuartzSoftware/simplnx 的其他 Issue
-
bug
难度 2/5 1-3 小时 新手友好度 78/100
BlueQuartzSoftware/simplnx#1987 ·
维护者通常 6 天内回复
-
Testing
难度 2/5 1-3 小时 新手友好度 62/100
BlueQuartzSoftware/simplnx#1979 ·
维护者通常 6 天内回复
-
documentation
难度 2/5 1-3 小时 新手友好度 65/100
BlueQuartzSoftware/simplnx#1978 ·
维护者通常 6 天内回复
-
难度 2/5 1-3 小时 新手友好度 82/100
BlueQuartzSoftware/simplnx#1945 ·
维护者通常 6 天内回复
-
BUG: Preserve precision in StringParameter legacy numeric conversion可能已有人在做 @jmarquisbq 于 8 天前认领。 未关闭
难度 2/5 1-3 小时 新手友好度 82/100
BlueQuartzSoftware/simplnx#1944 · 已指派 1 人 ·
维护者通常 6 天内回复
查看 BlueQuartzSoftware/simplnx 的全部 Issue
相似的 Issue
-
agent:Windows bug parity performance pri:medium sev:low tooling windows
难度 2/5 1-3 小时 新手友好度 78/100
维护者通常 1 天内回复
-
ai_p2
难度 2/5 1-3 小时 新手友好度 80/100
ClickHouse/ClickHouse#132519 ·
维护者通常 1 天内回复
-
patch_advisor_json_integration fails when the build tree is reached through a symbolic link可能已有人在做 @DerKarussellbremser 今天认领。 未关闭
难度 2/5 1-3 小时 新手友好度 88/100
boykopovar/AnyPS5#22581 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 72/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 76/100
juce-framework/JUCE#1810 ·